[PATCH v9 07/12] clk: meson: add vclk driver

Neil Armstrong neil.armstrong at linaro.org
Mon Nov 27 16:14:37 UTC 2023


On 24/11/2023 15:41, Jerome Brunet wrote:
> 
> On Fri 24 Nov 2023 at 09:41, Neil Armstrong <neil.armstrong at linaro.org> wrote:
> 
>> The VCLK and VCLK_DIV clocks have supplementary bits.
>>
>> The VCLK has a "SOFT RESET" bit to toggle after the whole
>> VCLK sub-tree rate has been set, this is implemented in
>> the gate enable callback.
>>
>> The VCLK_DIV clocks as enable and reset bits used to disable
>> and reset the divider, associated with CLK_SET_RATE_GATE it ensures
>> the rate is set while the divider is disabled and in reset mode.
>>
>> The VCLK_DIV enable bit isn't implemented as a gate since it's part
>> of the divider logic and vendor does this exact sequence to ensure
>> the divider is correctly set.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>> ---
>>   drivers/clk/meson/Kconfig  |   5 ++
>>   drivers/clk/meson/Makefile |   1 +
>>   drivers/clk/meson/vclk.c   | 141 +++++++++++++++++++++++++++++++++++++++++++++
>>   drivers/clk/meson/vclk.h   |  51 ++++++++++++++++
>>   4 files changed, 198 insertions(+)
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 29ffd14d267b..59a40a49f8e1 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
>>   	tristate
>>   	select COMMON_CLK_MESON_REGMAP
>>   
>> +config COMMON_CLK_MESON_VCLK
>> +	tristate
>> +	select COMMON_CLK_MESON_REGMAP
>> +
>>   config COMMON_CLK_MESON_CLKC_UTILS
>>   	tristate
>>   
>> @@ -140,6 +144,7 @@ config COMMON_CLK_G12A
>>   	select COMMON_CLK_MESON_EE_CLKC
>>   	select COMMON_CLK_MESON_CPU_DYNDIV
>>   	select COMMON_CLK_MESON_VID_PLL_DIV
>> +	select COMMON_CLK_MESON_VCLK
> 
> This particular line belong in the next patch
> 
>>   	select MFD_SYSCON
>>   	help
>>   	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 9ee4b954c896..9ba43fe7a07a 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
>>   obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
>>   obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
>>   obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
>> +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
>>   
>>   # Amlogic Clock controllers
>>   
>> diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
>> new file mode 100644
>> index 000000000000..47f08a52b49f
>> --- /dev/null
>> +++ b/drivers/clk/meson/vclk.c
>> @@ -0,0 +1,141 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2023 Neil Armstrong <neil.armstrong at linaro.org>
>> + */
>> +
>> +#include <linux/module.h>
>> +#include "vclk.h"
>> +
>> +/* The VCLK gate has a supplementary reset bit to pulse after ungating */
>> +
>> +static inline struct clk_regmap_vclk_data *
>> +clk_get_regmap_vclk_data(struct clk_regmap *clk)
>> +{
>> +	return (struct clk_regmap_vclk_data *)clk->data;
>> +}
>> +
>> +static int clk_regmap_vclk_enable(struct clk_hw *hw)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_data *vclk = clk_get_regmap_vclk_data(clk);
>> +
>> +	meson_parm_write(clk->map, &vclk->enable, 1);
>> +
>> +	/* Do a reset pulse */
>> +	meson_parm_write(clk->map, &vclk->reset, 1);
>> +	meson_parm_write(clk->map, &vclk->reset, 0);
>> +
>> +	return 0;
>> +}
>> +
>> +static void clk_regmap_vclk_disable(struct clk_hw *hw)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_data *vclk = clk_get_regmap_vclk_data(clk);
>> +
>> +	meson_parm_write(clk->map, &vclk->enable, 0);
>> +}
>> +
>> +static int clk_regmap_vclk_is_enabled(struct clk_hw *hw)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_data *vclk = clk_get_regmap_vclk_data(clk);
>> +
>> +	return meson_parm_read(clk->map, &vclk->enable);
>> +}
>> +
>> +const struct clk_ops clk_regmap_vclk_ops = {
>> +	.enable = clk_regmap_vclk_enable,
>> +	.disable = clk_regmap_vclk_disable,
>> +	.is_enabled = clk_regmap_vclk_is_enabled,
>> +};
>> +EXPORT_SYMBOL_GPL(clk_regmap_vclk_ops);
> 
> s/clk_regmap_vclk/meson_vclk at least for what is exported, ideally most
> all the code.
> 
> I get clk_regmap_ comes from code copied from clk_regmap.c.
> The reason the this part is different (and not using parm) if that when
> I converted amlogic to regmap, I hope we could make this generic,
> possibly converging between aml and qcom (which was the only other
> platform using regmap for clock at the time). This is why clk_regmap.c
> is a bit different from the other driver.
> 
> For the aml specific drivers, best to look at the mpll or cpu-dyndiv one.
> 
>> +
>> +/* The VCLK Divider has supplementary reset & enable bits */
>> +
>> +static inline struct clk_regmap_vclk_div_data *
>> +clk_get_regmap_vclk_div_data(struct clk_regmap *clk)
>> +{
>> +	return (struct clk_regmap_vclk_div_data *)clk->data;
>> +}
>> +
>> +static unsigned long clk_regmap_vclk_div_recalc_rate(struct clk_hw *hw,
>> +						     unsigned long prate)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
>> +
>> +	return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
>> +				   vclk->table, vclk->flags, vclk->div.width);
>> +}
>> +
>> +static int clk_regmap_vclk_div_determine_rate(struct clk_hw *hw,
>> +					      struct clk_rate_request *req)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
>> +
>> +	return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
>> +				      vclk->flags);
>> +}
>> +
>> +static int clk_regmap_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
>> +					unsigned long parent_rate)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
>> +	int ret;
>> +
>> +	ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
>> +			      vclk->flags);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	meson_parm_write(clk->map, &vclk->div, ret);
>> +
>> +	return 0;
>> +};
>> +
>> +static int clk_regmap_vclk_div_enable(struct clk_hw *hw)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
>> +
>> +	/* Unreset the divider when ungating */
>> +	meson_parm_write(clk->map, &vclk->reset, 0);
>> +	meson_parm_write(clk->map, &vclk->enable, 1);
>> +
>> +	return 0;
>> +}
>> +
>> +static void clk_regmap_vclk_div_disable(struct clk_hw *hw)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
>> +
>> +	/* Reset the divider when gating */
>> +	meson_parm_write(clk->map, &vclk->enable, 0);
>> +	meson_parm_write(clk->map, &vclk->reset, 1);
>> +}
>> +
>> +static int clk_regmap_vclk_div_is_enabled(struct clk_hw *hw)
>> +{
>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>> +	struct clk_regmap_vclk_div_data *vclk = clk_get_regmap_vclk_div_data(clk);
>> +
>> +	return meson_parm_read(clk->map, &vclk->enable);
>> +}
>> +
>> +const struct clk_ops clk_regmap_vclk_div_ops = {
>> +	.recalc_rate = clk_regmap_vclk_div_recalc_rate,
>> +	.determine_rate = clk_regmap_vclk_div_determine_rate,
>> +	.set_rate = clk_regmap_vclk_div_set_rate,
>> +	.enable = clk_regmap_vclk_div_enable,
>> +	.disable = clk_regmap_vclk_div_disable,
>> +	.is_enabled = clk_regmap_vclk_div_is_enabled,
>> +};
>> +EXPORT_SYMBOL_GPL(clk_regmap_vclk_div_ops);
>> +
>> +MODULE_DESCRIPTION("Amlogic vclk clock driver");
>> +MODULE_AUTHOR("Neil Armstrong <neil.armstrong at linaro.org>");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
>> new file mode 100644
>> index 000000000000..4f25d7ad2717
>> --- /dev/null
>> +++ b/drivers/clk/meson/vclk.h

Is vclk.c/h ok ? clk-vclk doesn't look pretty, but I can switch to it to
keep files organized.

Neil

>> @@ -0,0 +1,51 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2023 Neil Armstrong <neil.armstrong at linaro.org>
>> + */
>> +
>> +#ifndef __VCLK_H
>> +#define __VCLK_H
> 
> This is too generic.
> Please add the MESON prefix like the other clock driver please.
> 
>> +
>> +#include "clk-regmap.h"
>> +#include "parm.h"
>> +
>> +/**
>> + * struct clk_regmap_vclk_data - vclk regmap backed specific data
>> + *
>> + * @enable:	vclk enable field
>> + * @reset:	vclk reset field
>> + * @flags:	hardware-specific flags
>> + *
>> + * Flags:
>> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
>> + */
>> +struct clk_regmap_vclk_data {
>> +	struct parm enable;
>> +	struct parm reset;
>> +	u8 flags;
>> +};
>> +
>> +extern const struct clk_ops clk_regmap_vclk_ops;
>> +
>> +/**
>> + * struct clk_regmap_vclk_div_data - vclk_div regmap back specific data
>> + *
>> + * @div:	divider field
>> + * @enable:	vclk divider enable field
>> + * @reset:	vclk divider reset field
>> + * @table:	array of value/divider pairs, last entry should have div = 0
>> + *
>> + * Flags:
>> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
>> + */
>> +struct clk_regmap_vclk_div_data {
>> +	struct parm div;
>> +	struct parm enable;
>> +	struct parm reset;
>> +	const struct clk_div_table *table;
>> +	u8 flags;
>> +};
>> +
>> +extern const struct clk_ops clk_regmap_vclk_div_ops;
>> +
>> +#endif /* __VCLK_H */
> 



More information about the dri-devel mailing list