[PATCH v6] Documentation/gpu: VM_BIND locking document
Bagas Sanjaya
bagasdotme at gmail.com
Thu Nov 30 00:22:04 UTC 2023
On Wed, Nov 29, 2023 at 10:06:37AM +0100, Thomas Hellström wrote:
> diff --git a/Documentation/gpu/drm-vm-bind-locking.rst b/Documentation/gpu/drm-vm-bind-locking.rst
> new file mode 100644
> index 000000000000..a345aa513d12
> --- /dev/null
> +++ b/Documentation/gpu/drm-vm-bind-locking.rst
> @@ -0,0 +1,582 @@
> +.. SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +===============
> +VM_BIND locking
> +===============
> +
> +This document attempts to describe what's needed to get VM_BIND locking right,
> +including the userptr mmu_notifier locking. It also discusses some
> +optimizations to get rid of the looping through of all userptr mappings and
> +external / shared object mappings that is needed in the simplest
> +implementation. In addition, there is a section describing the VM_BIND locking
> +required for implementing recoverable pagefaults.
> +
> +The DRM GPUVM set of helpers
> +============================
> +
> +There is a set of helpers for drivers implementing VM_BIND, and this
> +set of helpers implements much, but not all of the locking described
> +in this document. In particular, it is currently lacking a userptr
> +implementation. This document does not intend to describe the DRM GPUVM
> +implementation in detail, but it is covered in :ref:`its own
> +documentation <drm_gpuvm>`. It is highly recommended for any driver
> +implementing VM_BIND to use the DRM GPUVM helpers and to extend it if
> +common functionality is missing.
> +
> +Nomenclature
> +============
> +
> +* ``gpu_vm``: Abstraction of a virtual GPU address space with
> + meta-data. Typically one per client (DRM file-private), or one per
> + execution context.
> +* ``gpu_vma``: Abstraction of a GPU address range within a gpu_vm with
> + associated meta-data. The backing storage of a gpu_vma can either be
> + a GEM object or anonymous or page-cache pages mapped also into the CPU
> + address space for the process.
> +* ``gpu_vm_bo``: Abstracts the association of a GEM object and
> + a VM. The GEM object maintains a list of gpu_vm_bos, where each gpu_vm_bo
> + maintains a list of gpu_vmas.
> +* ``userptr gpu_vma or just userptr``: A gpu_vma, whose backing store
> + is anonymous or page-cache pages as described above.
> +* ``revalidating``: Revalidating a gpu_vma means making the latest version
> + of the backing store resident and making sure the gpu_vma's
> + page-table entries point to that backing store.
> +* ``dma_fence``: A struct dma_fence that is similar to a struct completion
> + and which tracks GPU activity. When the GPU activity is finished,
> + the dma_fence signals. Please refer to the ``DMA Fences`` section of
> + the :doc:`dma-buf doc </driver-api/dma-buf>`.
> +* ``dma_resv``: A struct dma_resv (a.k.a reservation object) that is used
> + to track GPU activity in the form of multiple dma_fences on a
> + gpu_vm or a GEM object. The dma_resv contains an array / list
> + of dma_fences and a lock that needs to be held when adding
> + additional dma_fences to the dma_resv. The lock is of a type that
> + allows deadlock-safe locking of multiple dma_resvs in arbitrary
> + order. Please refer to the ``Reservation Objects`` section of the
> + :doc:`dma-buf doc </driver-api/dma-buf>`.
> +* ``exec function``: An exec function is a function that revalidates all
> + affected gpu_vmas, submits a GPU command batch and registers the
> + dma_fence representing the GPU command's activity with all affected
> + dma_resvs. For completeness, although not covered by this document,
> + it's worth mentioning that an exec function may also be the
> + revalidation worker that is used by some drivers in compute /
> + long-running mode.
> +* ``local object``: A GEM object which is only mapped within a
> + single VM. Local GEM objects share the gpu_vm's dma_resv.
> +* ``external object``: a.k.a shared object: A GEM object which may be shared
> + by multiple gpu_vms and whose backing storage may be shared with
> + other drivers.
> +
> +Locks and locking order
> +=======================
> +
> +One of the benefits of VM_BIND is that local GEM objects share the gpu_vm's
> +dma_resv object and hence the dma_resv lock. So, even with a huge
> +number of local GEM objects, only one lock is needed to make the exec
> +sequence atomic.
> +
> +The following locks and locking orders are used:
> +
> +* The ``gpu_vm->lock`` (optionally an rwsem). Protects the gpu_vm's
> + data structure keeping track of gpu_vmas. It can also protect the
> + gpu_vm's list of userptr gpu_vmas. With a CPU mm analogy this would
> + correspond to the mmap_lock. An rwsem allows several readers to walk
> + the VM tree concurrently, but the benefit of that concurrency most
> + likely varies from driver to driver.
> +* The ``userptr_seqlock``. This lock is taken in read mode for each
> + userptr gpu_vma on the gpu_vm's userptr list, and in write mode during mmu
> + notifier invalidation. This is not a real seqlock but described in
> + ``mm/mmu_notifier.c`` as a "Collision-retry read-side/write-side
> + 'lock' a lot like a seqcount. However this allows multiple
> + write-sides to hold it at once...". The read side critical section
> + is enclosed by ``mmu_interval_read_begin() /
> + mmu_interval_read_retry()`` with ``mmu_interval_read_begin()``
> + sleeping if the write side is held.
> + The write side is held by the core mm while calling mmu interval
> + invalidation notifiers.
> +* The ``gpu_vm->resv`` lock. Protects the gpu_vm's list of gpu_vmas needing
> + rebinding, as well as the residency state of all the gpu_vm's local
> + GEM objects.
> + Furthermore, it typically protects the gpu_vm's list of evicted and
> + external GEM objects.
> +* The ``gpu_vm->userptr_notifier_lock``. This is an rwsem that is
> + taken in read mode during exec and write mode during a mmu notifier
> + invalidation. The userptr notifier lock is per gpu_vm.
> +* The ``gem_object->gpuva_lock`` This lock protects the GEM object's
> + list of gpu_vm_bos. This is usually the same lock as the GEM
> + object's dma_resv, but some drivers protects this list differently,
> + see below.
> +* The ``gpu_vm list spinlocks``. With some implementations they are needed
> + to be able to update the gpu_vm evicted- and external object
> + list. For those implementations, the spinlocks are grabbed when the
> + lists are manipulated. However, to avoid locking order violations
> + with the dma_resv locks, a special scheme is needed when iterating
> + over the lists.
> +
> +.. _gpu_vma lifetime:
> +
> +Protection and lifetime of gpu_vm_bos and gpu_vmas
> +==================================================
> +
> +The GEM object's list of gpu_vm_bos, and the gpu_vm_bo's list of gpu_vmas
> +is protected by the ``gem_object->gpuva_lock``, which is typically the
> +same as the GEM object's dma_resv, but if the driver
> +needs to access these lists from within a dma_fence signalling
> +critical section, it can instead choose to protect it with a
> +separate lock, which can be locked from within the dma_fence signalling
> +critical section. Such drivers then need to pay additional attention
> +to what locks need to be taken from within the loop when iterating
> +over the gpu_vm_bo and gpu_vma lists to avoid locking-order violations.
> +
> +The DRM GPUVM set of helpers provide lockdep asserts that this lock is
> +held in relevant situations and also provides a means of making itself
> +aware of which lock is actually used: :c:func:`drm_gem_gpuva_set_lock`.
> +
> +Each gpu_vm_bo holds a reference counted pointer to the underlying GEM
> +object, and each gpu_vma holds a reference counted pointer to the
> +gpu_vm_bo. When iterating over the GEM object's list of gpu_vm_bos and
> +over the gpu_vm_bo's list of gpu_vmas, the ``gem_object->gpuva_lock`` must
> +not be dropped, otherwise, gpu_vmas attached to a gpu_vm_bo may
> +disappear without notice since those are not reference-counted. A
> +driver may implement its own scheme to allow this at the expense of
> +additional complexity, but this is outside the scope of this document.
> +
> +In the DRM GPUVM implementation, each gpu_vm_bo and each gpu_vma
> +holds a reference count on the gpu_vm itself. Due to this, and to avoid circular
> +reference counting, cleanup of the gpu_vm's gpu_vmas must not be done from the
> +gpu_vm's destructor. Drivers typically implements a gpu_vm close
> +function for this cleanup. The gpu_vm close function will abort gpu
> +execution using this VM, unmap all gpu_vmas and release page-table memory.
> +
> +Revalidation and eviction of local objects
> +==========================================
> +
> +Note that in all the code examples given below we use simplified
> +pseudo-code. In particular, the dma_resv deadlock avoidance algorithm
> +as well as reserving memory for dma_resv fences is left out.
> +
> +Revalidation
> +____________
> +With VM_BIND, all local objects need to be resident when the gpu is
> +executing using the gpu_vm, and the objects need to have valid
> +gpu_vmas set up pointing to them. Typically, each gpu command buffer
> +submission is therefore preceded with a re-validation section:
> +
> +.. code-block:: C
> +
> + dma_resv_lock(gpu_vm->resv);
> +
> + // Validation section starts here.
> + for_each_gpu_vm_bo_on_evict_list(&gpu_vm->evict_list, &gpu_vm_bo) {
> + validate_gem_bo(&gpu_vm_bo->gem_bo);
> +
> + // The following list iteration needs the Gem object's
> + // dma_resv to be held (it protects the gpu_vm_bo's list of
> + // gpu_vmas, but since local gem objects share the gpu_vm's
> + // dma_resv, it is already held at this point.
> + for_each_gpu_vma_of_gpu_vm_bo(&gpu_vm_bo, &gpu_vma)
> + move_gpu_vma_to_rebind_list(&gpu_vma, &gpu_vm->rebind_list);
> + }
> +
> + for_each_gpu_vma_on_rebind_list(&gpu vm->rebind_list, &gpu_vma) {
> + rebind_gpu_vma(&gpu_vma);
> + remove_gpu_vma_from_rebind_list(&gpu_vma);
> + }
> + // Validation section ends here, and job submission starts.
> +
> + add_dependencies(&gpu_job, &gpu_vm->resv);
> + job_dma_fence = gpu_submit(&gpu_job));
> +
> + add_dma_fence(job_dma_fence, &gpu_vm->resv);
> + dma_resv_unlock(gpu_vm->resv);
> +
> +The reason for having a separate gpu_vm rebind list is that there
> +might be userptr gpu_vmas that are not mapping a buffer object that
> +also need rebinding.
> +
> +Eviction
> +________
> +
> +Eviction of one of these local objects will then look similar to the
> +following:
> +
> +.. code-block:: C
> +
> + obj = get_object_from_lru();
> +
> + dma_resv_lock(obj->resv);
> + for_each_gpu_vm_bo_of_obj(obj, &gpu_vm_bo);
> + add_gpu_vm_bo_to_evict_list(&gpu_vm_bo, &gpu_vm->evict_list);
> +
> + add_dependencies(&eviction_job, &obj->resv);
> + job_dma_fence = gpu_submit(&eviction_job);
> + add_dma_fence(&obj->resv, job_dma_fence);
> +
> + dma_resv_unlock(&obj->resv);
> + put_object(obj);
> +
> +Note that since the object is local to the gpu_vm, it will share the gpu_vm's
> +dma_resv lock such that ``obj->resv == gpu_vm->resv``.
> +The gpu_vm_bos marked for eviction are put on the gpu_vm's evict list,
> +which is protected by ``gpu_vm->resv``. During eviction all local
> +objects have their dma_resv locked and, due to the above equality, also
> +the gpu_vm's dma_resv protecting the gpu_vm's evict list is locked.
> +
> +With VM_BIND, gpu_vmas don't need to be unbound before eviction,
> +since the driver must ensure that the eviction blit or copy will wait
> +for GPU idle or depend on all previous GPU activity. Furthermore, any
> +subsequent attempt by the GPU to access freed memory through the
> +gpu_vma will be preceded by a new exec function, with a revalidation
> +section which will make sure all gpu_vmas are rebound. The eviction
> +code holding the object's dma_resv while revalidating will ensure a
> +new exec function may not race with the eviction.
> +
> +A driver can be implemented in such a way that, on each exec function,
> +only a subset of vmas are selected for rebind. In this case, all vmas that are
> +*not* selected for rebind must be unbound before the exec
> +function workload is submitted.
> +
> +Locking with external buffer objects
> +====================================
> +
> +Since external buffer objects may be shared by multiple gpu_vm's they
> +can't share their reservation object with a single gpu_vm. Instead
> +they need to have a reservation object of their own. The external
> +objects bound to a gpu_vm using one or many gpu_vmas are therefore put on a
> +per-gpu_vm list which is protected by the gpu_vm's dma_resv lock or
> +one of the :ref:`gpu_vm list spinlocks <Spinlock iteration>`. Once
> +the gpu_vm's reservation object is locked, it is safe to traverse the
> +external object list and lock the dma_resvs of all external
> +objects. However, if instead a list spinlock is used, a more elaborate
> +iteration scheme needs to be used.
> +
> +At eviction time, the gpu_vm_bos of *all* the gpu_vms an external
> +object is bound to need to be put on their gpu_vm's evict list.
> +However, when evicting an external object, the dma_resvs of the
> +gpu_vms the object is bound to are typically not held. Only
> +the object's private dma_resv can be guaranteed to be held. If there
> +is a ww_acquire context at hand at eviction time we could grab those
> +dma_resvs but that could cause expensive ww_mutex rollbacks. A simple
> +option is to just mark the gpu_vm_bos of the evicted gem object with
> +an ``evicted`` bool that is inspected before the next time the
> +corresponding gpu_vm evicted list needs to be traversed. For example, when
> +traversing the list of external objects and locking them. At that time,
> +both the gpu_vm's dma_resv and the object's dma_resv is held, and the
> +gpu_vm_bo marked evicted, can then be added to the gpu_vm's list of
> +evicted gpu_vm_bos. The ``evicted`` bool is formally protected by the
> +object's dma_resv.
> +
> +The exec function becomes
> +
> +.. code-block:: C
> +
> + dma_resv_lock(gpu_vm->resv);
> +
> + // External object list is protected by the gpu_vm->resv lock.
> + for_each_gpu_vm_bo_on_extobj_list(gpu_vm, &gpu_vm_bo) {
> + dma_resv_lock(gpu_vm_bo.gem_obj->resv);
> + if (gpu_vm_bo_marked_evicted(&gpu_vm_bo))
> + add_gpu_vm_bo_to_evict_list(&gpu_vm_bo, &gpu_vm->evict_list);
> + }
> +
> + for_each_gpu_vm_bo_on_evict_list(&gpu_vm->evict_list, &gpu_vm_bo) {
> + validate_gem_bo(&gpu_vm_bo->gem_bo);
> +
> + for_each_gpu_vma_of_gpu_vm_bo(&gpu_vm_bo, &gpu_vma)
> + move_gpu_vma_to_rebind_list(&gpu_vma, &gpu_vm->rebind_list);
> + }
> +
> + for_each_gpu_vma_on_rebind_list(&gpu vm->rebind_list, &gpu_vma) {
> + rebind_gpu_vma(&gpu_vma);
> + remove_gpu_vma_from_rebind_list(&gpu_vma);
> + }
> +
> + add_dependencies(&gpu_job, &gpu_vm->resv);
> + job_dma_fence = gpu_submit(&gpu_job));
> +
> + add_dma_fence(job_dma_fence, &gpu_vm->resv);
> + for_each_external_obj(gpu_vm, &obj)
> + add_dma_fence(job_dma_fence, &obj->resv);
> + dma_resv_unlock_all_resv_locks();
> +
> +And the corresponding shared-object aware eviction would look like:
> +
> +.. code-block:: C
> +
> + obj = get_object_from_lru();
> +
> + dma_resv_lock(obj->resv);
> + for_each_gpu_vm_bo_of_obj(obj, &gpu_vm_bo)
> + if (object_is_vm_local(obj))
> + add_gpu_vm_bo_to_evict_list(&gpu_vm_bo, &gpu_vm->evict_list);
> + else
> + mark_gpu_vm_bo_evicted(&gpu_vm_bo);
> +
> + add_dependencies(&eviction_job, &obj->resv);
> + job_dma_fence = gpu_submit(&eviction_job);
> + add_dma_fence(&obj->resv, job_dma_fence);
> +
> + dma_resv_unlock(&obj->resv);
> + put_object(obj);
> +
> +.. _Spinlock iteration:
> +
> +Accessing the gpu_vm's lists without the dma_resv lock held
> +===========================================================
> +
> +Some drivers will hold the gpu_vm's dma_resv lock when accessing the
> +gpu_vm's evict list and external objects lists. However, there are
> +drivers that need to access these lists without the dma_resv lock
> +held, for example due to asynchronous state updates from within the
> +dma_fence signalling critical path. In such cases, a spinlock can be
> +used to protect manipulation of the lists. However, since higher level
> +sleeping locks need to be taken for each list item while iterating
> +over the lists, the items already iterated over need to be
> +temporarily moved to a private list and the spinlock released
> +while processing each item:
> +
> +.. code block:: C
> +
> + struct list_head still_in_list;
> +
> + INIT_LIST_HEAD(&still_in_list);
> +
> + spin_lock(&gpu_vm->list_lock);
> + do {
> + struct list_head *entry = list_first_entry_or_null(&gpu_vm->list, head);
> +
> + if (!entry)
> + break;
> +
> + list_move_tail(&entry->head, &still_in_list);
> + list_entry_get_unless_zero(entry);
> + spin_unlock(&gpu_vm->list_lock);
> +
> + process(entry);
> +
> + spin_lock(&gpu_vm->list_lock);
> + list_entry_put(entry);
> + } while (true);
> +
> + list_splice_tail(&still_in_list, &gpu_vm->list);
> + spin_unlock(&gpu_vm->list_lock);
> +
> +Due to the additional locking and atomic operations, drivers that *can*
> +avoid accessing the gpu_vm's list outside of the dma_resv lock
> +might want to avoid also this iteration scheme. Particularly, if the
> +driver anticipates a large number of list items. For lists where the
> +anticipated number of list items is small, where list iteration doesn't
> +happen very often or if there is a significant additional cost
> +associated with each iteration, the atomic operation overhead
> +associated with this type of iteration is, most likely, negligible. Note that
> +if this scheme is used, it is necessary to make sure this list
> +iteration is protected by an outer level lock or semaphore, since list
> +items are temporarily pulled off the list while iterating, and it is
> +also worth mentioning that the local list ``still_in_list`` should
> +also be considered protected by the ``gpu_vm->list_lock``, and it is
> +thus possible that items can be removed also from the local list
> +concurrently with list iteration.
> +
> +Please refer to the :ref:`DRM GPUVM locking section
> +<drm_gpuvm_locking>` and its internal
> +:c:func:`get_next_vm_bo_from_list` function.
> +
> +
> +userptr gpu_vmas
> +================
> +
> +A userptr gpu_vma is a gpu_vma that, instead of mapping a buffer object to a
> +GPU virtual address range, directly maps a CPU mm range of anonymous-
> +or file page-cache pages.
> +A very simple approach would be to just pin the pages using
> +pin_user_pages() at bind time and unpin them at unbind time, but this
> +creates a Denial-Of-Service vector since a single user-space process
> +would be able to pin down all of system memory, which is not
> +desirable. (For special use-cases and assuming proper accounting pinning might
> +still be a desirable feature, though). What we need to do in the
> +general case is to obtain a reference to the desired pages, make sure
> +we are notified using a MMU notifier just before the CPU mm unmaps the
> +pages, dirty them if they are not mapped read-only to the GPU, and
> +then drop the reference.
> +When we are notified by the MMU notifier that CPU mm is about to drop the
> +pages, we need to stop GPU access to the pages by waiting for VM idle
> +in the MMU notifier and make sure that before the next time the GPU
> +tries to access whatever is now present in the CPU mm range, we unmap
> +the old pages from the GPU page tables and repeat the process of
> +obtaining new page references. (See the :ref:`notifier example
> +<Invalidation example>` below). Note that when the core mm decides to
> +laundry pages, we get such an unmap MMU notification and can mark the
> +pages dirty again before the next GPU access. We also get similar MMU
> +notifications for NUMA accounting which the GPU driver doesn't really
> +need to care about, but so far it has proven difficult to exclude
> +certain notifications.
> +
> +Using a MMU notifier for device DMA (and other methods) is described in
> +:ref:`the pin_user_pages() documentation <mmu-notifier-registration-case>`.
> +
> +Now, the method of obtaining struct page references using
> +get_user_pages() unfortunately can't be used under a dma_resv lock
> +since that would violate the locking order of the dma_resv lock vs the
> +mmap_lock that is grabbed when resolving a CPU pagefault. This means
> +the gpu_vm's list of userptr gpu_vmas needs to be protected by an
> +outer lock, which in our example below is the ``gpu_vm->lock``.
> +
> +The MMU interval seqlock for a userptr gpu_vma is used in the following
> +way:
> +
> +.. code-block:: C
> +
> + // Exclusive locking mode here is strictly needed only if there are
> + // invalidated userptr gpu_vmas present, to avoid concurrent userptr
> + // revalidations of the same userptr gpu_vma.
> + down_write(&gpu_vm->lock);
> + retry:
> +
> + // Note: mmu_interval_read_begin() blocks until there is no
> + // invalidation notifier running anymore.
> + seq = mmu_interval_read_begin(&gpu_vma->userptr_interval);
> + if (seq != gpu_vma->saved_seq) {
> + obtain_new_page_pointers(&gpu_vma);
> + dma_resv_lock(&gpu_vm->resv);
> + add_gpu_vma_to_revalidate_list(&gpu_vma, &gpu_vm);
> + dma_resv_unlock(&gpu_vm->resv);
> + gpu_vma->saved_seq = seq;
> + }
> +
> + // The usual revalidation goes here.
> +
> + // Final userptr sequence validation may not happen before the
> + // submission dma_fence is added to the gpu_vm's resv, from the POW
> + // of the MMU invalidation notifier. Hence the
> + // userptr_notifier_lock that will make them appear atomic.
> +
> + add_dependencies(&gpu_job, &gpu_vm->resv);
> + down_read(&gpu_vm->userptr_notifier_lock);
> + if (mmu_interval_read_retry(&gpu_vma->userptr_interval, gpu_vma->saved_seq)) {
> + up_read(&gpu_vm->userptr_notifier_lock);
> + goto retry;
> + }
> +
> + job_dma_fence = gpu_submit(&gpu_job));
> +
> + add_dma_fence(job_dma_fence, &gpu_vm->resv);
> +
> + for_each_external_obj(gpu_vm, &obj)
> + add_dma_fence(job_dma_fence, &obj->resv);
> +
> + dma_resv_unlock_all_resv_locks();
> + up_read(&gpu_vm->userptr_notifier_lock);
> + up_write(&gpu_vm->lock);
> +
> +The code between ``mmu_interval_read_begin()`` and the
> +``mmu_interval_read_retry()`` marks the read side critical section of
> +what we call the ``userptr_seqlock``. In reality, the gpu_vm's userptr
> +gpu_vma list is looped through, and the check is done for *all* of its
> +userptr gpu_vmas, although we only show a single one here.
> +
> +The userptr gpu_vma MMU invalidation notifier might be called from
> +reclaim context and, again, to avoid locking order violations, we can't
> +take any dma_resv lock nor the gpu_vm->lock from within it.
> +
> +.. _Invalidation example:
> +.. code-block:: C
> +
> + bool gpu_vma_userptr_invalidate(userptr_interval, cur_seq)
> + {
> + // Make sure the exec function either sees the new sequence
> + // and backs off or we wait for the dma-fence:
> +
> + down_write(&gpu_vm->userptr_notifier_lock);
> + mmu_interval_set_seq(userptr_interval, cur_seq);
> + up_write(&gpu_vm->userptr_notifier_lock);
> +
> + // At this point, the exec function can't succeed in
> + // submitting a new job, because cur_seq is an invalid
> + // sequence number and will always cause a retry. When all
> + // invalidation callbacks, the mmu notifier core will flip
> + // the sequence number to a valid one. However we need to
> + // stop gpu access to the old pages here.
> +
> + dma_resv_wait_timeout(&gpu_vm->resv, DMA_RESV_USAGE_BOOKKEEP,
> + false, MAX_SCHEDULE_TIMEOUT);
> + return true;
> + }
> +
> +When this invalidation notifier returns, the GPU can no longer be
> +accessing the old pages of the userptr gpu_vma and needs to redo the
> +page-binding before a new GPU submission can succeed.
> +
> +Efficient userptr gpu_vma exec_function iteration
> +_________________________________________________
> +
> +If the gpu_vm's list of userptr gpu_vmas becomes large, it's
> +inefficient to iterate through the complete lists of userptrs on each
> +exec function to check whether each userptr gpu_vma's saved
> +sequence number is stale. A solution to this is to put all
> +*invalidated* userptr gpu_vmas on a separate gpu_vm list and
> +only check the gpu_vmas present on this list on each exec
> +function. This list will then lend itself very-well to the spinlock
> +locking scheme that is
> +:ref:`described in the spinlock iteration section <Spinlock iteration>`, since
> +in the mmu notifier, where we add the invalidated gpu_vmas to the
> +list, it's not possible to take any outer locks like the
> +``gpu_vm->lock`` or the ``gpu_vm->resv`` lock. Note that the
> +``gpu_vm->lock`` still needs to be taken while iterating to ensure the list is
> +complete, as also mentioned in that section.
> +
> +If using an invalidated userptr list like this, the retry check in the
> +exec function trivially becomes a check for invalidated list empty.
> +
> +Locking at bind and unbind time
> +===============================
> +
> +At bind time, assuming a GEM object backed gpu_vma, each
> +gpu_vma needs to be associated with a gpu_vm_bo and that
> +gpu_vm_bo in turn needs to be added to the GEM object's
> +gpu_vm_bo list, and possibly to the gpu_vm's external object
> +list. This is referred to as *linking* the gpu_vma, and typically
> +requires that the ``gpu_vm->lock`` and the ``gem_object->gpuva_lock``
> +are held. When unlinking a gpu_vma the same locks should be held,
> +and that ensures that when iterating over ``gpu_vmas`, either under
> +the ``gpu_vm->resv`` or the GEM object's dma_resv, that the gpu_vmas
> +stay alive as long as the lock under which we iterate is not released. For
> +userptr gpu_vmas it's similarly required that during vma destroy, the
> +outer ``gpu_vm->lock`` is held, since otherwise when iterating over
> +the invalidated userptr list as described in the previous section,
> +there is nothing keeping those userptr gpu_vmas alive.
> +
> +Locking for recoverable page-fault page-table updates
> +=====================================================
> +
> +There are two important things we need to ensure with locking for
> +recoverable page-faults:
> +
> +* At the time we return pages back to the system / allocator for
> + reuse, there should be no remaining GPU mappings and any GPU TLB
> + must have been flushed.
> +* The unmapping and mapping of a gpu_vma must not race.
> +
> +Since the unmapping (or zapping) of GPU ptes is typically taking place
> +where it is hard or even impossible to take any outer level locks we
> +must either introduce a new lock that is held at both mapping and
> +unmapping time, or look at the locks we do hold at unmapping time and
> +make sure that they are held also at mapping time. For userptr
> +gpu_vmas, the ``userptr_seqlock`` is held in write mode in the mmu
> +invalidation notifier where zapping happens. Hence, if the
> +``userptr_seqlock`` as well as the ``gpu_vm->userptr_notifier_lock``
> +is held in read mode during mapping, it will not race with the
> +zapping. For GEM object backed gpu_vmas, zapping will take place under
> +the GEM object's dma_resv and ensuring that the dma_resv is held also
> +when populating the page-tables for any gpu_vma pointing to the GEM
> +object, will similarly ensure we are race-free.
> +
> +If any part of the mapping is performed asynchronously
> +under a dma-fence with these locks released, the zapping will need to
> +wait for that dma-fence to signal under the relevant lock before
> +starting to modify the page-table.
> +
> +Since modifying the
> +page-table structure in a way that frees up page-table memory
> +might also require outer level locks, the zapping of GPU ptes
> +typically focuses only on zeroing page-table or page-directory entries
> +and flushing TLB, whereas freeing of page-table memory is deferred to
> +unbind or rebind time.
> diff --git a/Documentation/gpu/implementation_guidelines.rst b/Documentation/gpu/implementation_guidelines.rst
> index 138e637dcc6b..dbccfa72f1c9 100644
> --- a/Documentation/gpu/implementation_guidelines.rst
> +++ b/Documentation/gpu/implementation_guidelines.rst
> @@ -7,3 +7,4 @@ Misc DRM driver uAPI- and feature implementation guidelines
> .. toctree::
>
> drm-vm-bind-async
> + drm-vm-bind-locking
> diff --git a/Documentation/gpu/rfc/xe.rst b/Documentation/gpu/rfc/xe.rst
> index c29113a0ac30..ceb21219d52e 100644
> --- a/Documentation/gpu/rfc/xe.rst
> +++ b/Documentation/gpu/rfc/xe.rst
> @@ -123,10 +123,15 @@ Documentation should include:
>
> * O(1) complexity under VM_BIND.
>
> +The document is now included in the drm documentation :doc:`here </gpu/drm-vm-bind-async>`.
> +
> Some parts of userptr like mmu_notifiers should become GPUVA or DRM helpers when
> the second driver supporting VM_BIND+userptr appears. Details to be defined when
> the time comes.
>
> +The DRM GPUVM helpers do not yet include the userptr parts, but discussions
> +about implementing them are ongoing.
> +
> Long running compute: minimal data structure/scaffolding
> --------------------------------------------------------
> The generic scheduler code needs to include the handling of endless compute
LGTM, thanks!
Reviewed-by: Bagas Sanjaya <bagasdotme at gmail.com>
--
An old man doll... just what I always wanted! - Clara
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20231130/55f22c78/attachment-0001.sig>
More information about the dri-devel
mailing list