[PATCH] drm/msm/dpu: correct clk bit for WB2 block

[Dmitry Baryshkov]

On sc7280 there are two clk bits for WB2: control and status. While
programming the VBIF params of WB, the driver should be toggling the
former bit, while the sc7280_mdp struct lists the latter one.

Correct that to ensure proper programming sequence for WB2 on sc7280.

Fixes: 3ce166380567 ("drm/msm/dpu: add writeback support for sc7280")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
index 3b5061c4402a..9195cb996f44 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h
@@ -25,7 +25,7 @@ static const struct dpu_mdp_cfg sc7280_mdp = {
 		[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
 		[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
 		[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2c4, .bit_off = 8 },
-		[DPU_CLK_CTRL_WB2] = { .reg_off = 0x3b8, .bit_off = 24 },
+		[DPU_CLK_CTRL_WB2] = { .reg_off = 0x2bc, .bit_off = 16 },
 	},
 };
 
-- 
2.39.2