[PATCH 8/8] dt-bindings: display: Add SSD132x OLED controllers

Rob Herring robh at kernel.org
Tue Oct 10 16:58:38 UTC 2023


On Mon, Oct 09, 2023 at 08:34:22PM +0200, Javier Martinez Canillas wrote:
> Add a Device Tree binding schema for the OLED panels based on the Solomon
> SSD132x family of controllers.

Looks like the same binding as solomon,ssd1307fb.yaml. Why a different 
binding? Why does that binding need a slew of custom properties and here 
you don't?

> 
> Signed-off-by: Javier Martinez Canillas <javierm at redhat.com>
> ---
> 
>  .../bindings/display/solomon,ssd132x.yaml     | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
> new file mode 100644
> index 000000000000..b64904703a3a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/solomon,ssd132x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Solomon SSD132x OLED Controllers
> +
> +maintainers:
> +  - Javier Martinez Canillas <javierm at redhat.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - solomon,ssd1322
> +          - solomon,ssd1325
> +          - solomon,ssd1327
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  # Only required for SPI
> +  dc-gpios:
> +    description:
> +      GPIO connected to the controller's D/C# (Data/Command) pin,
> +      that is needed for 4-wire SPI to tell the controller if the
> +      data sent is for a command register or the display data RAM
> +    maxItems: 1
> +
> +  solomon,height:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Height in pixel of the screen driven by the controller.
> +      The default value is controller-dependent.
> +
> +  solomon,width:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Width in pixel of the screen driven by the controller.
> +      The default value is controller-dependent.

Don't define the same properties twice. Either share the binding or 
split out the common properties into their own schema file.

Rob


More information about the dri-devel mailing list