[PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties

[Flavio Suligoi]

The two properties:

- max-brightness
- default brightness

are not really required, so they can be removed from the "required"
section.

Other changes:

- improve the backlight working mode description, in the "description"
  section
- update the example, removing the "max-brightness" and introducing the
  "brightess-levels" property

Signed-off-by: Flavio Suligoi <f.suligoi at asem.it>
---
 .../bindings/leds/backlight/mps,mp3309c.yaml           | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
index 4191e33626f5..527a37368ed7 100644
--- a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
@@ -14,8 +14,8 @@ description: |
   programmable switching frequency to optimize efficiency.
   It supports two different dimming modes:
 
-  - analog mode, via I2C commands (default)
-  - PWM controlled mode.
+  - analog mode, via I2C commands, as default mode (32 dimming levels)
+  - PWM controlled mode (optional)
 
   The datasheet is available at:
   https://www.monolithicpower.com/en/mp3309c.html
@@ -50,8 +50,6 @@ properties:
 required:
   - compatible
   - reg
-  - max-brightness
-  - default-brightness
 
 unevaluatedProperties: false
 
@@ -66,8 +64,8 @@ examples:
             compatible = "mps,mp3309c";
             reg = <0x17>;
             pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
-            max-brightness = <100>;
-            default-brightness = <80>;
+            brightness-levels = <0 4 8 16 32 64 128 255>;
+            default-brightness = <6>;
             mps,overvoltage-protection-microvolt = <24000000>;
         };
     };
-- 
2.34.1