[PATCH 06/11] accel/ivpu: Change test_mode module param to bitmask

[Stanislaw Gruszka]

From: Karol Wachowski <karol.wachowski at linux.intel.com>

Change meaning of test_mode module parameter from integer value
to bitmask allowing setting different test features with corresponding
bits.

Signed-off-by: Karol Wachowski <karol.wachowski at linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka at linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka at linux.intel.com>
---
 drivers/accel/ivpu/ivpu_drv.c | 4 ++--
 drivers/accel/ivpu/ivpu_drv.h | 7 +++----
 drivers/accel/ivpu/ivpu_job.c | 4 ++--
 3 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c
index 2a58fb1e2fcc..4dbfd05680ce 100644
--- a/drivers/accel/ivpu/ivpu_drv.c
+++ b/drivers/accel/ivpu/ivpu_drv.c
@@ -39,7 +39,7 @@ MODULE_PARM_DESC(dbg_mask, "Driver debug mask. See IVPU_DBG_* macros.");
 
 int ivpu_test_mode;
 module_param_named_unsafe(test_mode, ivpu_test_mode, int, 0644);
-MODULE_PARM_DESC(test_mode, "Test mode: 0 - disabled , 1 - fw unit test, 2 - null hw, 3 - null submission");
+MODULE_PARM_DESC(test_mode, "Test mode mask. See IVPU_TEST_MODE_* macros.");
 
 u8 ivpu_pll_min_ratio;
 module_param_named(pll_min_ratio, ivpu_pll_min_ratio, byte, 0644);
@@ -315,7 +315,7 @@ static int ivpu_wait_for_ready(struct ivpu_device *vdev)
 	unsigned long timeout;
 	int ret;
 
-	if (ivpu_test_mode == IVPU_TEST_MODE_FW_TEST)
+	if (ivpu_test_mode & IVPU_TEST_MODE_FW_TEST)
 		return 0;
 
 	ivpu_ipc_consumer_add(vdev, &cons, IVPU_IPC_CHAN_BOOT_MSG);
diff --git a/drivers/accel/ivpu/ivpu_drv.h b/drivers/accel/ivpu/ivpu_drv.h
index 267e03a5edf4..5432b5ee90df 100644
--- a/drivers/accel/ivpu/ivpu_drv.h
+++ b/drivers/accel/ivpu/ivpu_drv.h
@@ -148,10 +148,9 @@ extern u8 ivpu_pll_min_ratio;
 extern u8 ivpu_pll_max_ratio;
 extern bool ivpu_disable_mmu_cont_pages;
 
-#define IVPU_TEST_MODE_DISABLED        0
-#define IVPU_TEST_MODE_FW_TEST         1
-#define IVPU_TEST_MODE_NULL_HW         2
-#define IVPU_TEST_MODE_NULL_SUBMISSION 3
+#define IVPU_TEST_MODE_FW_TEST         BIT(0)
+#define IVPU_TEST_MODE_NULL_HW         BIT(1)
+#define IVPU_TEST_MODE_NULL_SUBMISSION BIT(2)
 extern int ivpu_test_mode;
 
 struct ivpu_file_priv *ivpu_file_priv_get(struct ivpu_file_priv *file_priv);
diff --git a/drivers/accel/ivpu/ivpu_job.c b/drivers/accel/ivpu/ivpu_job.c
index 646b8f812901..6e96c921547d 100644
--- a/drivers/accel/ivpu/ivpu_job.c
+++ b/drivers/accel/ivpu/ivpu_job.c
@@ -196,7 +196,7 @@ static int ivpu_cmdq_push_job(struct ivpu_cmdq *cmdq, struct ivpu_job *job)
 	entry->batch_buf_addr = job->cmd_buf_vpu_addr;
 	entry->job_id = job->job_id;
 	entry->flags = 0;
-	if (unlikely(ivpu_test_mode == IVPU_TEST_MODE_NULL_SUBMISSION))
+	if (unlikely(ivpu_test_mode & IVPU_TEST_MODE_NULL_SUBMISSION))
 		entry->flags = VPU_JOB_FLAGS_NULL_SUBMISSION_MASK;
 	wmb(); /* Ensure that tail is updated after filling entry */
 	header->tail = next_entry;
@@ -404,7 +404,7 @@ static int ivpu_direct_job_submission(struct ivpu_job *job)
 		 job->job_id, job->cmd_buf_vpu_addr, file_priv->ctx.id,
 		 job->engine_idx, cmdq->jobq->header.tail);
 
-	if (ivpu_test_mode == IVPU_TEST_MODE_NULL_HW) {
+	if (ivpu_test_mode & IVPU_TEST_MODE_NULL_HW) {
 		ivpu_job_done(vdev, job->job_id, VPU_JSM_STATUS_SUCCESS);
 		cmdq->jobq->header.head = cmdq->jobq->header.tail;
 		wmb(); /* Flush WC buffer for jobq header */
-- 
2.25.1