[PATCH] drm/bridge: tc358767: Support input format negotiation hook

[Jan Kiszka]

On 30.10.23 20:28, Aradhya Bhatia wrote:
> With new connector model, tc358767 will not create the connector, when
> DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and display-controller driver will
> rely on format negotiation to setup the encoder format.
> 
> Add the missing input-format negotiation hook in the
> drm_bridge_funcs to complete DRM_BRIDGE_ATTACH_NO_CONNECTOR support.
> 
> Input format is selected to MEDIA_BUS_FMT_RGB888_1X24 as default, as is
> the case with older model.
> 
> Reported-by: Jan Kiszka <jan.kiszka at siemens.com>
> Signed-off-by: Aradhya Bhatia <a-bhatia1 at ti.com>
> ---
> 
> Notes:
> 
>   * Since I do not have hardware with me, this was just build tested. I would
>     appreciate it if someone could test and review it, especically somebody, who
>     uses the bridge for DPI/DSI to eDP format conversion.
> 
>   * The Toshiba TC358767 bridge is not enabled in arm64 defconfig by default,
>     when it should be. Hence, I sent a quick patch[0] earlier.
> 
> [0]: https://lore.kernel.org/all/20231030152834.18450-1-a-bhatia1@ti.com/
> 
>  drivers/gpu/drm/bridge/tc358767.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index ef2e373606ba..0affcefdeb1c 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -1751,6 +1751,30 @@ tc_dpi_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
>  	return input_fmts;
>  }
>  
> +static u32 *
> +tc_edp_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> +				 struct drm_bridge_state *bridge_state,
> +				 struct drm_crtc_state *crtc_state,
> +				 struct drm_connector_state *conn_state,
> +				 u32 output_fmt,
> +				 unsigned int *num_input_fmts)
> +{
> +	u32 *input_fmts;
> +
> +	*num_input_fmts = 0;
> +
> +	input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> +			     GFP_KERNEL);
> +	if (!input_fmts)
> +		return NULL;
> +
> +	/* This is the DSI/DPI-end bus format */
> +	input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> +	*num_input_fmts = 1;
> +
> +	return input_fmts;
> +}
> +
>  static const struct drm_bridge_funcs tc_dpi_bridge_funcs = {
>  	.attach = tc_dpi_bridge_attach,
>  	.mode_valid = tc_dpi_mode_valid,
> @@ -1777,6 +1801,7 @@ static const struct drm_bridge_funcs tc_edp_bridge_funcs = {
>  	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
>  	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
>  	.atomic_reset = drm_atomic_helper_bridge_reset,
> +	.atomic_get_input_bus_fmts = tc_edp_atomic_get_input_bus_fmts,
>  };
>  
>  static bool tc_readable_reg(struct device *dev, unsigned int reg)
> 
> base-commit: c503e3eec382ac708ee7adf874add37b77c5d312

Doesn't help, callback is never invoked. There must be more missing.

Regarding test setup: Maybe your colleague Preneeth can help to give you
access, he just received some devices from us. Otherwise, drop me
instrumentation patches.

Jan

-- 
Siemens AG, Technology
Linux Expert Center