[RFC PATCH v2 3/9] drm/panel: nv3052c: Sleep for 150ms after reset

[Jessica Zhang]

On 9/18/2023 5:58 AM, John Watts wrote:
> The current code waits after resets for 5 to 20 milliseconds.
> This is appropriate when resetting a sleeping panel, but an awake panel
> requires at least 120ms of waiting.
> 
> Sleep for 150ms so the panel always completes it reset properly.
> 
> Signed-off-by: John Watts <contact at jookia.org>

Hi John,

Just wondering, is there some context to this change? I.e., was this 
made to fix a specific issue?

This seems like a pretty significant increase in wait time so, if it's 
not a fix, I'm not sure if this would be an improvement on the current 
behavior.

Thanks,

Jessica Zhang

> ---
>   drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> index 90dea21f9856..2526b123b1f5 100644
> --- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> +++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> @@ -258,7 +258,7 @@ static int nv3052c_prepare(struct drm_panel *panel)
>   	gpiod_set_value_cansleep(priv->reset_gpio, 1);
>   	usleep_range(10, 1000);
>   	gpiod_set_value_cansleep(priv->reset_gpio, 0);
> -	usleep_range(5000, 20000);
> +	msleep(150);
>   
>   	for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
>   		err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
> -- 
> 2.42.0
>