[RFC PATCH v2 3/9] drm/panel: nv3052c: Sleep for 150ms after reset

[John Watts]

On Mon, Sep 18, 2023 at 11:34:51PM +0200, Paul Cercueil wrote:
> The driver is guaranteed to always reset the panel in sleep-in mode -
> as long as the panel was off when the driver started.
> 
> What I'd suggest if you really need to support a case where the panel
> was enabled by the bootloader, is to read the 0x0a register after
> enabling the regulator to read the mode, and sleep 120ms if it was in
> sleep-out mode.
> 
> But that's only if it's a case that you can test with. I won't accept a
> patch that makes sense on the surface if it addresses a corner case
> that nobody ever tested for.
> 
> For what I know, this patch just adds a huge delay to panel boot-up for
> all existing users for no valid reason.
>
> 
> Cheers,
> -Paul

Thank you very much for this feedback. I am more than happy to throw these
sleep patches in the trash and come back later with a proper solution when
I have an actual hardware setup and use case to test on.

John.