[PATCH 1/2] drm/amd/display: Introduce overlay cursor mode
Leo Li
sunpeng.li at amd.com
Mon Apr 1 14:38:41 UTC 2024
On 2024-03-28 11:52, Harry Wentland wrote:
>
>
> On 2024-03-28 11:48, Robert Mader wrote:
>> Hi,
>>
>> On 15.03.24 18:09, sunpeng.li at amd.com wrote:
>>> From: Leo Li <sunpeng.li at amd.com>
>>>
>>> [Why]
>>>
>>> DCN is the display hardware for amdgpu. DRM planes are backed by DCN
>>> hardware pipes, which carry pixel data from one end (memory), to the
>>> other (output encoder).
>>>
>>> Each DCN pipe has the ability to blend in a cursor early on in the
>>> pipeline. In other words, there are no dedicated cursor planes in DCN,
>>> which makes cursor behavior somewhat unintuitive for compositors.
>>>
>>> For example, if the cursor is in RGB format, but the top-most DRM plane
>>> is in YUV format, DCN will not be able to blend them. Because of this,
>>> amdgpu_dm rejects all configurations where a cursor needs to be enabled
>>> on top of a YUV formatted plane.
>>>
>>> From a compositor's perspective, when computing an allocation for
>>> hardware plane offloading, this cursor-on-yuv configuration result in an
>>> atomic test failure. Since the failure reason is not obvious at all,
>>> compositors will likely fall back to full rendering, which is not ideal.
>>>
>>> Instead, amdgpu_dm can try to accommodate the cursor-on-yuv
>>> configuration by opportunistically reserving a separate DCN pipe just
>>> for the cursor. We can refer to this as "overlay cursor mode". It is
>>> contrasted with "native cursor mode", where the native DCN per-pipe
>>> cursor is used.
>>>
>>> [How]
>>>
>>> On each crtc, compute whether the cursor plane should be enabled in
>>> overlay mode (which currently, is iff the immediate plane below has a
>>> YUV format). If it is, mark the CRTC as requesting overlay cursor mode.
>>
>> iff -> if
>>
>> IIRC another case where this would be needed is when the scale of the plane
>> below doesn't match the cursor scale. This is especially common for videos and
>> thus implicitly covered by the YUV check in most cases, but should probably be
>> made explicit. Michel Dänzer might be able to comment here.
>>
>> Another possible case that could be covered here is when some area is not
>> covered by any plane and just shows a black background. This happens e.g. if a
>> compositor puts a YUV surface on the primary plane that has a different
>> width/high ratio than the display. The compositor can add black bars by just
>> leaving the area uncovered and thus require only a single hardware plane for
>> video playback ("Unless explicitly specified (..), the active area of a CRTC
>> will be black by default."
>> https://dri.freedesktop.org/docs/drm/gpu/drm-kms.html#plane-abstraction). If
>> the cursor is visible over this black bars, AMD currently refuses the commit
>> IIUC (see also Michel Dänzers comment at
>> https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177#note_1924544)
>>
>
> Thanks for mentioning both of these scenarios. I agree it would be
> good if we can expand the use of the overlay cursor to these cases.
>
> Harry
>
>> Thanks,
>>
>> Robert Mader
All good points, thanks for the feedback. I'll take a peek at the scaling + no
underlying plane case and send a v2 when I get around to it.
Leo
>>
>>>
>>> During DC validation, attempt to enable a separate DCN pipe for the
>>> cursor if it's in overlay mode. If that fails, or if no overlay mode is
>>> requested, then fallback to native mode.
>>>
>>> Signed-off-by: Leo Li <sunpeng.li at amd.com>
>>> ---
>>> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 309 +++++++++++++++---
>>> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 7 +
>>> .../amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 1 +
>>> .../amd/display/amdgpu_dm/amdgpu_dm_plane.c | 13 +-
>>> 4 files changed, 288 insertions(+), 42 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
>>> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
>>> index 21a61454c878..09ab330aed17 100644
>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
>>> @@ -8359,8 +8359,19 @@ static void amdgpu_dm_commit_planes(struct
>>> drm_atomic_state *state,
>>> * Disable the cursor first if we're disabling all the planes.
>>> * It'll remain on the screen after the planes are re-enabled
>>> * if we don't.
>>> + *
>>> + * If the cursor is transitioning from native to overlay mode, the
>>> + * native cursor needs to be disabled first.
>>> */
>>> - if (acrtc_state->active_planes == 0)
>>> + if (acrtc_state->cursor_mode == DM_CURSOR_OVERLAY_MODE &&
>>> + dm_old_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE) {
>>> + struct dc_cursor_position cursor_position = {0};
>>> + dc_stream_set_cursor_position(acrtc_state->stream,
>>> + &cursor_position);
>>> + }
>>> +
>>> + if (acrtc_state->active_planes == 0 &&
>>> + dm_old_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE)
>>> amdgpu_dm_commit_cursors(state);
>>> /* update planes when needed */
>>> @@ -8374,7 +8385,8 @@ static void amdgpu_dm_commit_planes(struct
>>> drm_atomic_state *state,
>>> struct dm_plane_state *dm_new_plane_state =
>>> to_dm_plane_state(new_plane_state);
>>> /* Cursor plane is handled after stream updates */
>>> - if (plane->type == DRM_PLANE_TYPE_CURSOR) {
>>> + if (plane->type == DRM_PLANE_TYPE_CURSOR &&
>>> + acrtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE) {
>>> if ((fb && crtc == pcrtc) ||
>>> (old_plane_state->fb && old_plane_state->crtc == pcrtc))
>>> cursor_update = true;
>>> @@ -8727,7 +8739,8 @@ static void amdgpu_dm_commit_planes(struct
>>> drm_atomic_state *state,
>>> * This avoids redundant programming in the case where we're going
>>> * to be disabling a single plane - those pipes are being disabled.
>>> */
>>> - if (acrtc_state->active_planes)
>>> + if (acrtc_state->active_planes &&
>>> + acrtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE)
>>> amdgpu_dm_commit_cursors(state);
>>> cleanup:
>>> @@ -10039,7 +10052,8 @@ static bool should_reset_plane(struct
>>> drm_atomic_state *state,
>>> {
>>> struct drm_plane *other;
>>> struct drm_plane_state *old_other_state, *new_other_state;
>>> - struct drm_crtc_state *new_crtc_state;
>>> + struct drm_crtc_state *old_crtc_state, *new_crtc_state;
>>> + struct dm_crtc_state *old_dm_crtc_state, *new_dm_crtc_state;
>>> struct amdgpu_device *adev = drm_to_adev(plane->dev);
>>> int i;
>>> @@ -10061,10 +10075,24 @@ static bool should_reset_plane(struct
>>> drm_atomic_state *state,
>>> new_crtc_state =
>>> drm_atomic_get_new_crtc_state(state, new_plane_state->crtc);
>>> + old_crtc_state =
>>> + drm_atomic_get_old_crtc_state(state, old_plane_state->crtc);
>>> if (!new_crtc_state)
>>> return true;
>>> + /*
>>> + * A change in cursor mode means a new dc pipe needs to be acquired or
>>> + * released from the state
>>> + */
>>> + old_dm_crtc_state = to_dm_crtc_state(old_crtc_state);
>>> + new_dm_crtc_state = to_dm_crtc_state(new_crtc_state);
>>> + if (plane->type == DRM_PLANE_TYPE_CURSOR &&
>>> + old_dm_crtc_state != NULL &&
>>> + old_dm_crtc_state->cursor_mode != new_dm_crtc_state->cursor_mode) {
>>> + return true;
>>> + }
>>> +
>>> /* CRTC Degamma changes currently require us to recreate planes. */
>>> if (new_crtc_state->color_mgmt_changed)
>>> return true;
>>> @@ -10216,6 +10244,68 @@ static int dm_check_cursor_fb(struct amdgpu_crtc
>>> *new_acrtc,
>>> return 0;
>>> }
>>> +/*
>>> + * Helper function for checking the cursor in native mode
>>> + */
>>> +static int dm_check_native_cursor_state(struct drm_crtc *new_plane_crtc,
>>> + struct drm_plane *plane,
>>> + struct drm_plane_state *new_plane_state,
>>> + bool enable)
>>> +{
>>> +
>>> + struct amdgpu_crtc *new_acrtc;
>>> + int ret;
>>> +
>>> + if (!enable || !new_plane_crtc ||
>>> + drm_atomic_plane_disabling(plane->state, new_plane_state))
>>> + return 0;
>>> +
>>> + new_acrtc = to_amdgpu_crtc(new_plane_crtc);
>>> +
>>> + if (new_plane_state->src_x != 0 || new_plane_state->src_y != 0) {
>>> + DRM_DEBUG_ATOMIC("Cropping not supported for cursor plane\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (new_plane_state->fb) {
>>> + ret = dm_check_cursor_fb(new_acrtc, new_plane_state,
>>> + new_plane_state->fb);
>>> + if (ret)
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static bool dm_should_update_native_cursor(struct drm_atomic_state *state,
>>> + struct drm_crtc *old_plane_crtc,
>>> + struct drm_crtc *new_plane_crtc,
>>> + bool enable)
>>> +{
>>> + struct drm_crtc_state *old_crtc_state, *new_crtc_state;
>>> + struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state;
>>> +
>>> + if (!enable) {
>>> + if (old_plane_crtc == NULL)
>>> + return true;
>>> +
>>> + old_crtc_state = drm_atomic_get_old_crtc_state(
>>> + state, old_plane_crtc);
>>> + dm_old_crtc_state = to_dm_crtc_state(old_crtc_state);
>>> +
>>> + return dm_old_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE;
>>> + } else {
>>> + if (new_plane_crtc == NULL)
>>> + return true;
>>> +
>>> + new_crtc_state = drm_atomic_get_new_crtc_state(
>>> + state, new_plane_crtc);
>>> + dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
>>> +
>>> + return dm_new_crtc_state->cursor_mode == DM_CURSOR_NATIVE_MODE;
>>> + }
>>> +}
>>> +
>>> static int dm_update_plane_state(struct dc *dc,
>>> struct drm_atomic_state *state,
>>> struct drm_plane *plane,
>>> @@ -10231,8 +10321,7 @@ static int dm_update_plane_state(struct dc *dc,
>>> struct drm_crtc_state *old_crtc_state, *new_crtc_state;
>>> struct dm_crtc_state *dm_new_crtc_state, *dm_old_crtc_state;
>>> struct dm_plane_state *dm_new_plane_state, *dm_old_plane_state;
>>> - struct amdgpu_crtc *new_acrtc;
>>> - bool needs_reset;
>>> + bool needs_reset, update_native_cursor;
>>> int ret = 0;
>>> @@ -10241,24 +10330,16 @@ static int dm_update_plane_state(struct dc *dc,
>>> dm_new_plane_state = to_dm_plane_state(new_plane_state);
>>> dm_old_plane_state = to_dm_plane_state(old_plane_state);
>>> - if (plane->type == DRM_PLANE_TYPE_CURSOR) {
>>> - if (!enable || !new_plane_crtc ||
>>> - drm_atomic_plane_disabling(plane->state, new_plane_state))
>>> - return 0;
>>> -
>>> - new_acrtc = to_amdgpu_crtc(new_plane_crtc);
>>> -
>>> - if (new_plane_state->src_x != 0 || new_plane_state->src_y != 0) {
>>> - DRM_DEBUG_ATOMIC("Cropping not supported for cursor plane\n");
>>> - return -EINVAL;
>>> - }
>>> + update_native_cursor = dm_should_update_native_cursor(state,
>>> + old_plane_crtc,
>>> + new_plane_crtc,
>>> + enable);
>>> - if (new_plane_state->fb) {
>>> - ret = dm_check_cursor_fb(new_acrtc, new_plane_state,
>>> - new_plane_state->fb);
>>> - if (ret)
>>> - return ret;
>>> - }
>>> + if (plane->type == DRM_PLANE_TYPE_CURSOR && update_native_cursor) {
>>> + ret = dm_check_native_cursor_state(new_plane_crtc, plane,
>>> + new_plane_state, enable);
>>> + if (ret)
>>> + return ret;
>>> return 0;
>>> }
>>> @@ -10285,16 +10366,17 @@ static int dm_update_plane_state(struct dc *dc,
>>> plane->base.id, old_plane_crtc->base.id);
>>> ret = dm_atomic_get_state(state, &dm_state);
>>> - if (ret)
>>> - return ret;
>>> + if (ret) {
>>> + goto out;
>>> + }
>>> if (!dc_state_remove_plane(
>>> dc,
>>> dm_old_crtc_state->stream,
>>> dm_old_plane_state->dc_state,
>>> dm_state->context)) {
>>> -
>>> - return -EINVAL;
>>> + ret = -EINVAL;
>>> + goto out;
>>> }
>>> if (dm_old_plane_state->dc_state)
>>> @@ -10323,21 +10405,16 @@ static int dm_update_plane_state(struct dc *dc,
>>> return 0;
>>> ret = amdgpu_dm_plane_helper_check_state(new_plane_state,
>>> new_crtc_state);
>>> - if (ret)
>>> - return ret;
>>> + if (ret) {
>>> + goto out;
>>> + }
>>> WARN_ON(dm_new_plane_state->dc_state);
>>> dc_new_plane_state = dc_create_plane_state(dc);
>>> - if (!dc_new_plane_state)
>>> - return -ENOMEM;
>>> -
>>> - /* Block top most plane from being a video plane */
>>> - if (plane->type == DRM_PLANE_TYPE_OVERLAY) {
>>> - if
>>> (amdgpu_dm_plane_is_video_format(new_plane_state->fb->format->format) &&
>>> *is_top_most_overlay)
>>> - return -EINVAL;
>>> -
>>> - *is_top_most_overlay = false;
>>> + if (!dc_new_plane_state) {
>>> + ret = -ENOMEM;
>>> + goto out;
>>> }
>>> DRM_DEBUG_ATOMIC("Enabling DRM plane: %d on DRM crtc %d\n",
>>> @@ -10350,13 +10427,13 @@ static int dm_update_plane_state(struct dc *dc,
>>> new_crtc_state);
>>> if (ret) {
>>> dc_plane_state_release(dc_new_plane_state);
>>> - return ret;
>>> + goto out;
>>> }
>>> ret = dm_atomic_get_state(state, &dm_state);
>>> if (ret) {
>>> dc_plane_state_release(dc_new_plane_state);
>>> - return ret;
>>> + goto out;
>>> }
>>> /*
>>> @@ -10373,7 +10450,8 @@ static int dm_update_plane_state(struct dc *dc,
>>> dm_state->context)) {
>>> dc_plane_state_release(dc_new_plane_state);
>>> - return -EINVAL;
>>> + ret = -EINVAL;
>>> + goto out;
>>> }
>>> dm_new_plane_state->dc_state = dc_new_plane_state;
>>> @@ -10388,6 +10466,16 @@ static int dm_update_plane_state(struct dc *dc,
>>> *lock_and_validation_needed = true;
>>> }
>>> +out:
>>> + /* If cursor overlay failed, attempt fallback to native mode */
>>> + if (ret == -EINVAL && plane->type == DRM_PLANE_TYPE_CURSOR) {
>>> + ret = dm_check_native_cursor_state(new_plane_crtc, plane,
>>> + new_plane_state, enable);
>>> + if (ret) {
>>> + return ret;
>>> + }
>>> + dm_new_crtc_state->cursor_mode = DM_CURSOR_NATIVE_MODE;
>>> + }
>>> return ret;
>>> }
>>> @@ -10544,6 +10632,126 @@ static int add_affected_mst_dsc_crtcs(struct
>>> drm_atomic_state *state, struct drm
>>> return drm_dp_mst_add_affected_dsc_crtcs(state,
>>> &aconnector->mst_root->mst_mgr);
>>> }
>>> +/**
>>> + * DOC: Cursor Modes - Native vs Overlay
>>> + *
>>> + * In native mode, the cursor uses a integrated cursor pipe within each DCN hw
>>> + * plane. It does not require a dedicated hw plane to enable, but it is
>>> + * subjected to the same z-order and scaling as the hw plane. It also has
>>> format
>>> + * restrictions, a RGB cursor in native mode cannot be enabled within a non-RGB
>>> + * hw plane.
>>> + *
>>> + * In overlay mode, the cursor uses a separate DCN hw plane, and thus has its
>>> + * own scaling and z-pos. It also has no blending restrictions. It lends to a
>>> + * cursor behavior more akin to a DRM client's expectations. However, it does
>>> + * occupy an extra DCN plane, and therefore will only be used if a DCN plane is
>>> + * available.
>>> +*/
>>> +
>>> +/**
>>> + * Set whether the cursor should be enabled in native mode, or overlay mode, on
>>> + * the dm_crtc_state.
>>> + *
>>> + * The cursor should be enabled in overlay mode if the immediate underlying
>>> + * plane contains a video format.
>>> + *
>>> + * Since zpos info is required, drm_atomic_normalize_zpos must be called before
>>> + * calling this function.
>>> +*/
>>> +static int dm_crtc_set_cursor_mode(struct drm_atomic_state *state,
>>> + struct dm_crtc_state *dm_crtc_state)
>>> +{
>>> + struct drm_plane_state *plane_state, *old_plane_state, *target_plane_state;
>>> + struct drm_crtc_state *crtc_state = &dm_crtc_state->base;
>>> + struct drm_plane *plane;
>>> + bool consider_mode_change = false;
>>> + bool cursor_changed = false;
>>> + unsigned int target_zpos;
>>> + unsigned int cursor_zpos;
>>> + int i;
>>> +
>>> + /*
>>> + * Cursor mode can change if a plane's format changes, is
>>> + * enabled/disabled, or z-order changes.
>>> + */
>>> + for_each_oldnew_plane_in_state(state, plane, old_plane_state,
>>> plane_state, i) {
>>> +
>>> + /* Only care about planes on this CRTC */
>>> + if ((drm_plane_mask(plane) & crtc_state->plane_mask) == 0)
>>> + continue;
>>> +
>>> + if (plane->type == DRM_PLANE_TYPE_CURSOR)
>>> + cursor_changed = true;
>>> +
>>> + if (drm_atomic_plane_enabling(old_plane_state, plane_state) ||
>>> + drm_atomic_plane_disabling(old_plane_state, plane_state) ||
>>> + old_plane_state->fb->format != plane_state->fb->format) {
>>> + consider_mode_change = true;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + if (!consider_mode_change && !crtc_state->zpos_changed) {
>>> + return 0;
>>> + }
>>> +
>>> + /*
>>> + * If no cursor change on this CRTC, and not enabled on this CRTC, then
>>> + * no need to set cursor mode. This avoids needlessly locking the cursor
>>> + * state.
>>> + */
>>> + if (!cursor_changed &&
>>> + !(drm_plane_mask(crtc_state->crtc->cursor) & crtc_state->plane_mask)) {
>>> + return 0;
>>> + }
>>> +
>>> + plane_state = drm_atomic_get_plane_state(state,
>>> + crtc_state->crtc->cursor);
>>> + if (IS_ERR(plane_state))
>>> + return PTR_ERR(plane_state);
>>> +
>>> + /* Cursor is disabled */
>>> + if (!plane_state->fb)
>>> + return 0;
>>> +
>>> + cursor_zpos = plane_state->normalized_zpos;
>>> +
>>> + /* Get enabled plane immediately below cursor. */
>>> + target_plane_state = NULL;
>>> + target_zpos = 0;
>>> + drm_for_each_plane_mask(plane, state->dev, crtc_state->plane_mask) {
>>> + if (plane->type == DRM_PLANE_TYPE_CURSOR)
>>> + continue;
>>> +
>>> + plane_state = drm_atomic_get_plane_state(state, plane);
>>> + if (IS_ERR(plane_state))
>>> + return PTR_ERR(plane_state);
>>> +
>>> + if (!plane_state->fb ||
>>> + plane_state->normalized_zpos >= cursor_zpos)
>>> + continue;
>>> +
>>> + if (plane_state->normalized_zpos >= target_zpos) {
>>> + target_zpos = plane_state->normalized_zpos;
>>> + target_plane_state = plane_state;
>>> + }
>>> + }
>>> +
>>> + /* Nothing below cursor - use overlay mode */
>>> + if (target_plane_state == NULL) {
>>> + dm_crtc_state->cursor_mode = DM_CURSOR_OVERLAY_MODE;
>>> + return 0;
>>> + }
>>> +
>>> + if
>>> (amdgpu_dm_plane_is_video_format(target_plane_state->fb->format->format)) {
>>> + dm_crtc_state->cursor_mode = DM_CURSOR_OVERLAY_MODE;
>>> + } else {
>>> + dm_crtc_state->cursor_mode = DM_CURSOR_NATIVE_MODE;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> /**
>>> * amdgpu_dm_atomic_check() - Atomic check implementation for AMDgpu DM.
>>> *
>>> @@ -10713,6 +10921,20 @@ static int amdgpu_dm_atomic_check(struct drm_device
>>> *dev,
>>> goto fail;
>>> }
>>> + /*
>>> + * Determine whether cursors on each CRTC should be enabled in native or
>>> + * overlay mode.
>>> + */
>>> + for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
>>> + dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
>>> +
>>> + ret = dm_crtc_set_cursor_mode(state, dm_new_crtc_state);
>>> + if (ret) {
>>> + drm_dbg(dev, "Failed to determine cursor mode\n");
>>> + goto fail;
>>> + }
>>> + }
>>> +
>>> /* Remove exiting planes if they are modified */
>>> for_each_oldnew_plane_in_state_reverse(state, plane, old_plane_state,
>>> new_plane_state, i) {
>>> if (old_plane_state->fb && new_plane_state->fb &&
>>> @@ -10793,6 +11015,11 @@ static int amdgpu_dm_atomic_check(struct drm_device
>>> *dev,
>>> /* Check cursor planes scaling */
>>> for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
>>> + /* Overlay cusor does not need scaling check */
>>> + dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
>>> + if (dm_new_crtc_state->cursor_mode == DM_CURSOR_OVERLAY_MODE)
>>> + continue;
>>> +
>>> ret = dm_check_crtc_cursor(state, crtc, new_crtc_state);
>>> if (ret) {
>>> DRM_DEBUG_DRIVER("dm_check_crtc_cursor() failed\n");
>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
>>> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
>>> index 09519b7abf67..b8d39fdd1e09 100644
>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
>>> @@ -822,6 +822,11 @@ struct dm_plane_state {
>>> enum amdgpu_transfer_function blend_tf;
>>> };
>>> +enum amdgpu_dm_cursor_mode {
>>> + DM_CURSOR_NATIVE_MODE = 0,
>>> + DM_CURSOR_OVERLAY_MODE,
>>> +};
>>> +
>>> struct dm_crtc_state {
>>> struct drm_crtc_state base;
>>> struct dc_stream_state *stream;
>>> @@ -852,6 +857,8 @@ struct dm_crtc_state {
>>> * encoding.
>>> */
>>> enum amdgpu_transfer_function regamma_tf;
>>> +
>>> + enum amdgpu_dm_cursor_mode cursor_mode;
>>> };
>>> #define to_dm_crtc_state(x) container_of(x, struct dm_crtc_state, base)
>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
>>> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
>>> index e23a0a276e33..67aea1d2feb9 100644
>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c
>>> @@ -304,6 +304,7 @@ static struct drm_crtc_state
>>> *amdgpu_dm_crtc_duplicate_state(struct drm_crtc *cr
>>> state->regamma_tf = cur->regamma_tf;
>>> state->crc_skip_count = cur->crc_skip_count;
>>> state->mpo_requested = cur->mpo_requested;
>>> + state->cursor_mode = cur->cursor_mode;
>>> /* TODO Duplicate dc_stream after objects are stream object is
>>> flattened */
>>> return &state->base;
>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
>>> b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
>>> index 8a4c40b4c27e..ed1fc01f1649 100644
>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
>>> @@ -104,7 +104,7 @@ void amdgpu_dm_plane_fill_blending_from_plane_state(const
>>> struct drm_plane_state
>>> *global_alpha = false;
>>> *global_alpha_value = 0xff;
>>> - if (plane_state->plane->type != DRM_PLANE_TYPE_OVERLAY)
>>> + if (plane_state->plane->type == DRM_PLANE_TYPE_PRIMARY)
>>> return;
>>> if (plane_state->pixel_blend_mode == DRM_MODE_BLEND_PREMULTI ||
>>> @@ -1175,10 +1175,21 @@ static int amdgpu_dm_plane_atomic_check(struct
>>> drm_plane *plane,
>>> static int amdgpu_dm_plane_atomic_async_check(struct drm_plane *plane,
>>> struct drm_atomic_state *state)
>>> {
>>> + struct drm_crtc_state *new_crtc_state;
>>> + struct drm_plane_state *new_plane_state;
>>> + struct dm_crtc_state *dm_new_crtc_state;
>>> +
>>> /* Only support async updates on cursor planes. */
>>> if (plane->type != DRM_PLANE_TYPE_CURSOR)
>>> return -EINVAL;
>>> + new_plane_state = drm_atomic_get_new_plane_state(state, plane);
>>> + new_crtc_state = drm_atomic_get_new_crtc_state(state,
>>> new_plane_state->crtc);
>>> + dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
>>> + /* Reject overlay cursors for now*/
>>> + if (dm_new_crtc_state->cursor_mode == DM_CURSOR_OVERLAY_MODE)
>>> + return -EINVAL;
>>> +
>>> return 0;
>>> }
More information about the dri-devel
mailing list