[PATCH 01/11] drm/i915/dp: Fix DSC line buffer depth programming

Jani Nikula jani.nikula at intel.com
Wed Apr 3 12:10:34 UTC 2024


On Thu, 28 Mar 2024, Imre Deak <imre.deak at intel.com> wrote:
> On Wed, Mar 20, 2024 at 10:11:41PM +0200, Imre Deak wrote:
>> Fix the calculation of the DSC line buffer depth. This is limited both
>> by the source's and sink's maximum line buffer depth, but the former one
>> was not taken into account. On all Intel platform's the source's maximum
>> buffer depth is 13, so the overall limit is simply the minimum of the
>> source/sink's limit, regardless of the DSC version.
>> 
>> This leaves the DSI DSC line buffer depth calculation as-is, trusting
>> VBT.
>> 
>> On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16
>> the line buffer depth was incorrectly programmed as 0, leading to a
>> corruption in color gradients / lines on the decompressed screen image.
>> 
>> Cc: dri-devel at lists.freedesktop.org
>> Signed-off-by: Imre Deak <imre.deak at intel.com>
>
> Hi Maarten, Thomas, Maxime,
>
> are you ok to merge the DRM DP-DSC/MST changes in patches 1, 7-9, 11 via
> drm-intel-next?

Ping? Ack for merging via drm-intel-next, please?

BR,
Jani.


>
> --Imre
>
>> ---
>>  drivers/gpu/drm/i915/display/intel_dp.c | 16 ++++++----------
>>  include/drm/display/drm_dsc.h           |  3 ---
>>  2 files changed, 6 insertions(+), 13 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
>> index af7ca00e9bc0a..dbe65651bf277 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> @@ -89,6 +89,9 @@
>>  #define DP_DSC_MAX_ENC_THROUGHPUT_0		340000
>>  #define DP_DSC_MAX_ENC_THROUGHPUT_1		400000
>>  
>> +/* Max DSC line buffer depth supported by HW. */
>> +#define INTEL_DP_DSC_MAX_LINE_BUF_DEPTH		13
>> +
>>  /* DP DSC FEC Overhead factor in ppm = 1/(0.972261) = 1.028530 */
>>  #define DP_DSC_FEC_OVERHEAD_FACTOR		1028530
>>  
>> @@ -1703,7 +1706,6 @@ static int intel_dp_dsc_compute_params(const struct intel_connector *connector,
>>  {
>>  	struct drm_i915_private *i915 = to_i915(connector->base.dev);
>>  	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
>> -	u8 line_buf_depth;
>>  	int ret;
>>  
>>  	/*
>> @@ -1732,20 +1734,14 @@ static int intel_dp_dsc_compute_params(const struct intel_connector *connector,
>>  			connector->dp.dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] &
>>  			DP_DSC_RGB;
>>  
>> -	line_buf_depth = drm_dp_dsc_sink_line_buf_depth(connector->dp.dsc_dpcd);
>> -	if (!line_buf_depth) {
>> +	vdsc_cfg->line_buf_depth = min(INTEL_DP_DSC_MAX_LINE_BUF_DEPTH,
>> +				       drm_dp_dsc_sink_line_buf_depth(connector->dp.dsc_dpcd));
>> +	if (!vdsc_cfg->line_buf_depth) {
>>  		drm_dbg_kms(&i915->drm,
>>  			    "DSC Sink Line Buffer Depth invalid\n");
>>  		return -EINVAL;
>>  	}
>>  
>> -	if (vdsc_cfg->dsc_version_minor == 2)
>> -		vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
>> -			DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
>> -	else
>> -		vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
>> -			DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
>> -
>>  	vdsc_cfg->block_pred_enable =
>>  		connector->dp.dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
>>  		DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
>> diff --git a/include/drm/display/drm_dsc.h b/include/drm/display/drm_dsc.h
>> index bc90273d06a62..bbbe7438473d3 100644
>> --- a/include/drm/display/drm_dsc.h
>> +++ b/include/drm/display/drm_dsc.h
>> @@ -40,9 +40,6 @@
>>  #define DSC_PPS_RC_RANGE_MINQP_SHIFT		11
>>  #define DSC_PPS_RC_RANGE_MAXQP_SHIFT		6
>>  #define DSC_PPS_NATIVE_420_SHIFT		1
>> -#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS		16
>> -#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL		0
>> -#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS		13
>>  
>>  /**
>>   * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
>> -- 
>> 2.43.3
>> 

-- 
Jani Nikula, Intel


More information about the dri-devel mailing list