[RESEND v7 29/37] sh: SH7751R SoC Internal peripheral definition dtsi.

[Yoshinori Sato]

SH7751R internal peripherals device tree.

Signed-off-by: Yoshinori Sato <ysato at users.sourceforge.jp>
---
 arch/sh/boot/dts/sh7751r.dtsi | 105 ++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)
 create mode 100644 arch/sh/boot/dts/sh7751r.dtsi

diff --git a/arch/sh/boot/dts/sh7751r.dtsi b/arch/sh/boot/dts/sh7751r.dtsi
new file mode 100644
index 000000000000..61b2af5bebde
--- /dev/null
+++ b/arch/sh/boot/dts/sh7751r.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SH7751R SoC
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/sh7750-cpg.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			compatible = "renesas,sh4", "renesas,sh2";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&cpg SH7750_CPG_ICK>;
+			clock-names = "ick";
+			icache-size = <16384>;
+			icache-line-size = <32>;
+			dcache-size = <32768>;
+			dcache-line-size = <32>;
+		};
+	};
+
+	extal: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "extal";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&shintc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cpg: clock-controller at ffc00000 {
+			#clock-cells = <1>;
+			#power-domain-cells = <0>;
+			compatible = "renesas,sh7751r-cpg";
+			clocks = <&extal>;
+			clock-names = "extal";
+			reg = <0xffc00000 20>, <0xfe0a0000 16>;
+			reg-names = "FRQCR", "CLKSTP00";
+			renesas,mode = <0>;
+		};
+
+		shintc: interrupt-controller at ffd00000 {
+			compatible = "renesas,sh7751-intc";
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			reg = <0xffd00000 20>, <0xfe080000 128>;
+			reg-names = "ICR", "INTPRI00";
+		};
+
+		/* sci0 is rarely used, so it is not defined here. */
+		scif1: serial at ffe80000 {
+			compatible = "renesas,scif-sh7751", "renesas,scif";
+			reg = <0xffe80000 0x100>;
+			interrupts = <0x700>,
+				     <0x720>,
+				     <0x760>,
+				     <0x740>;
+			interrupt-names = "eri", "rxi", "txi", "bri";
+			clocks = <&cpg SH7750_MSTP_SCIF>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		/* Normally ch0 and ch1 are used, so we will define ch0 to ch2 here. */
+		tmu0: timer at ffd80000 {
+			compatible = "renesas,tmu-sh7750", "renesas,tmu";
+			reg = <0xffd80000 12>;
+			interrupts = <0x400>,
+				     <0x420>,
+				     <0x440>,
+				     <0x460>;
+			interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
+			clocks = <&cpg SH7750_MSTP_TMU012>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#renesas,channels = <3>;
+		};
+
+		pcic: pci at fe200000 {
+			compatible = "renesas,sh7751-pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			bus-range = <0 0>;
+			reg = <0xfe200000 0x0400>,
+			      <0xff800000 0x0100>;
+			status = "disabled";
+		};
+	};
+};
-- 
2.39.2