[PATCH 0/2] drm/amdgpu/display: Make multi-plane configurations more flexible
Harry Wentland
harry.wentland at amd.com
Thu Apr 4 13:59:03 UTC 2024
On 2024-04-04 06:24, Pekka Paalanen wrote:
> On Wed, 3 Apr 2024 17:32:46 -0400
> Leo Li <sunpeng.li at amd.com> wrote:
>
>> On 2024-03-28 10:33, Pekka Paalanen wrote:
>>> On Fri, 15 Mar 2024 13:09:56 -0400
>>> <sunpeng.li at amd.com> wrote:
>>>
>>>> From: Leo Li <sunpeng.li at amd.com>
>>>>
>>>> These patches aim to make the amdgpgu KMS driver play nicer with compositors
>>>> when building multi-plane scanout configurations. They do so by:
>>>>
>>>> 1. Making cursor behavior more sensible.
>>>> 2. Allowing placement of DRM OVERLAY planes underneath the PRIMARY plane for
>>>> 'underlay' configurations (perhaps more of a RFC, see below).
>>>>
>>>> Please see the commit messages for details.
>>>>
>>>>
>>>> For #2, the simplest way to accomplish this was to increase the value of the
>>>> immutable zpos property for the PRIMARY plane. This allowed OVERLAY planes with
>>>> a mutable zpos range of (0-254) to be positioned underneath the PRIMARY for an
>>>> underlay scanout configuration.
>>>>
>>>> Technically speaking, DCN hardware does not have a concept of primary or overlay
>>>> planes - there are simply 4 general purpose hardware pipes that can be maped in
>>>> any configuration. So the immutable zpos restriction on the PRIMARY plane is
>>>> kind of arbitrary; it can have a mutable range of (0-254) just like the
>>>> OVERLAYs. The distinction between PRIMARY and OVERLAY planes is also somewhat
>>>> arbitrary. We can interpret PRIMARY as the first plane that should be enabled on
>>>> a CRTC, but beyond that, it doesn't mean much for amdgpu.
>>>>
>>>> Therefore, I'm curious about how compositors devs understand KMS planes and
>>>> their zpos properties, and how we would like to use them. It isn't clear to me
>>>> how compositors wish to interpret and use the DRM zpos property, or
>>>> differentiate between OVERLAY and PRIMARY planes, when it comes to setting up
>>>> multi-plane scanout.
>>>
>>> You already quoted me on the Weston link, so I don't think I have
>>> anything to add. Sounds fine to me, and we don't have a standard plane
>>> arrangement algorithm that the kernel could optimize zpos ranges
>>> against, yet.
>>>
>>>> Ultimately, what I'd like to answer is "What can we do on the KMS driver and DRM
>>>> plane API side, that can make building multi-plane scanout configurations easier
>>>> for compositors?" I'm hoping we can converge on something, whether that be
>>>> updating the existing documentation to better define the usage, or update the
>>>> API to provide support for something that is lacking.
>>>
>>> I think there probably should be a standardised plane arrangement
>>> algorithm in userspace, because the search space suffers from
>>> permutational explosion. Either there needs to be very few planes (max
>>> 4 or 5 at-all-possible per CRTC, including shareable ones) for an
>>> exhaustive search to be feasible, or all planes should be more or less
>>> equal in capabilities and userspace employs some simplified or
>>> heuristic search.
>>>
>>> If the search algorithm is fixed, then drivers could optimize zpos
>>> ranges to have the algorithm find a solution faster.
>>>
>>> My worry is that userspace already has heuristic search algorithms that
>>> may start failing if drivers later change their zpos ranges to be more
>>> optimal for another algorithm.
>>>
>>> OTOH, as long as exhaustive search is feasible, then it does not matter
>>> how DRM drivers set up the zpos ranges.
>>>
>>> In any case, the zpos ranges should try to allow all possible plane
>>> arrangements while minimizing the number of arrangements that won't
>>> work. The absolute values of zpos are pretty much irrelevant, so I
>>> think setting one plane to have an immutable zpos is a good idea, even
>>> if it's not necessary by the driver. That is one less moving part, and
>>> only the relative ordering between the planes matters.
>>>
>>>
>>> Thanks,
>>> pq
>>
>> Right, thanks for your thoughts! I agree that there should be a common plane
>> arrangement algorithm. I think libliftoff is the most obvious candidate here. It
>> only handles overlay arrangements currently, but mixed-mode arrangements is
>> something I've been trying to look at.
>>
>> Taking the driver's reported zpos into account could narrow down the search
>> space for mixed arrangements. We could tell whether underlay, or overlay, or
>> both, is supported by looking at the allowed zpos ranges.
>>
>> I also wonder if it'll make underlay assignments easier. libliftoff has an
>> assumption that the PRIMARY plane has the lowest zpos (which now I realize, is
>> not always true). Therefore, the underlay buffer has to be placed on the
>> PRIMARY, with the render buffer on a higher OVERLAY. Swapping buffers between
>> planes when testing mixed-arrangements is kind of awkward, and simply setting
>> the OVERLAY's zpos to be lower or higher than the PRIMARY's sounds simpler.
>>
>> Currently only gamescope makes use of libliftoff, but I'm curious if patches
>> hooking it up to Weston would be welcomed? If there are other ways to have a
>> common arrangement algorithm, I'd be happy to hear that as well.
>
> A natural thing would be to document such an algorithm with the KMS
> UAPI.
>
> I don't know libliftoff well enough to say how welcome it would be in
> Weston. I have no fundamental or policy reason to keep an independent
> implementation in Weston though, so it's plausible at least.
>
> It would need investigation, and perhaps also extending Weston test
> suite a lot more towards VKMS to verify plane assignments. Currently
> all plane assignment testing is manual on real hardware.
>
It looks like VKMS doesn't have explicit zpos yet, so someone would
probably need to add that.
https://drmdb.emersion.fr/properties/4008636142/zpos
Harry
>> Note that libliftoff's algorithm is more complex than weston, since it searches
>> harder, and suffers from that permutational explosion. But it solves that by
>> trying high benefit arrangements first (offloading surfaces that update
>> frequently), and bailing out once the search reaches a hard-coded deadline.
>> Since it's currently overlay-only, the goal could be to "simply" have no
>> regressions.
>
> Ensuring no regressions would indeed need to be taken care of by
> extending the VKMS-based automated testing.
>
>
> Thanks,
> pq
>
>>>
>>>> Some links to provide context and details:
>>>> * What is underlay?: https://gitlab.freedesktop.org/emersion/libliftoff/-/issues/76
>>>> * Discussion on how to implement underlay on Weston: https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/1258#note_2325164
>>>>
>>>> Cc: Joshua Ashton <joshua at froggi.es>
>>>> Cc: Michel Dänzer <mdaenzer at redhat.com>
>>>> Cc: Chao Guo <chao.guo at nxp.com>
>>>> Cc: Xaver Hugl <xaver.hugl at gmail.com>
>>>> Cc: Vikas Korjani <Vikas.Korjani at amd.com>
>>>> Cc: Robert Mader <robert.mader at posteo.de>
>>>> Cc: Pekka Paalanen <pekka.paalanen at collabora.com>
>>>> Cc: Sean Paul <sean at poorly.run>
>>>> Cc: Simon Ser <contact at emersion.fr>
>>>> Cc: Shashank Sharma <shashank.sharma at amd.com>
>>>> Cc: Harry Wentland <harry.wentland at amd.com>
>>>> Cc: Sebastian Wick <sebastian.wick at redhat.com>
>>>>
>>>> Leo Li (2):
>>>> drm/amd/display: Introduce overlay cursor mode
>>>> drm/amd/display: Move PRIMARY plane zpos higher
>>>>
>>>> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 405 ++++++++++++++++--
>>>> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 7 +
>>>> .../amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 1 +
>>>> .../amd/display/amdgpu_dm/amdgpu_dm_plane.c | 28 +-
>>>> 4 files changed, 391 insertions(+), 50 deletions(-)
>>>>
>>>
>
More information about the dri-devel
mailing list