[PATCH v3 1/9] drm: xlnx: zynqmp_dpsub: Set layer mode during creation

[Tomi Valkeinen]

On 21/03/2024 22:43, Anatoliy Klymenko wrote:
> Set layer mode of operation (live or dma-based) during layer creation.
> 
> Each DPSUB layer mode of operation is defined by corresponding DT node port
> connection, so it is possible to assign it during layer object creation.
> Previously it was set in layer enable functions, although it is too late
> as setting layer format depends on layer mode, and should be done before
> given layer enabled.
> 
> Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko at amd.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
>   drivers/gpu/drm/xlnx/zynqmp_disp.c | 20 ++++++++++++++++----
>   drivers/gpu/drm/xlnx/zynqmp_disp.h | 13 +------------
>   drivers/gpu/drm/xlnx/zynqmp_dp.c   |  2 +-
>   drivers/gpu/drm/xlnx/zynqmp_kms.c  |  2 +-
>   4 files changed, 19 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> index 8a39b3accce5..e6d26ef60e89 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_disp.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> @@ -64,6 +64,16 @@
>   
>   #define ZYNQMP_DISP_MAX_NUM_SUB_PLANES			3
>   
> +/**
> + * enum zynqmp_dpsub_layer_mode - Layer mode
> + * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
> + * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
> + */
> +enum zynqmp_dpsub_layer_mode {
> +	ZYNQMP_DPSUB_LAYER_NONLIVE,
> +	ZYNQMP_DPSUB_LAYER_LIVE,
> +};
> +
>   /**
>    * struct zynqmp_disp_format - Display subsystem format information
>    * @drm_fmt: DRM format (4CC)
> @@ -902,15 +912,12 @@ u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
>   /**
>    * zynqmp_disp_layer_enable - Enable a layer
>    * @layer: The layer
> - * @mode: Operating mode of layer
>    *
>    * Enable the @layer in the audio/video buffer manager and the blender. DMA
>    * channels are started separately by zynqmp_disp_layer_update().
>    */
> -void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
> -			      enum zynqmp_dpsub_layer_mode mode)
> +void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer)
>   {
> -	layer->mode = mode;
>   	zynqmp_disp_avbuf_enable_video(layer->disp, layer);
>   	zynqmp_disp_blend_layer_enable(layer->disp, layer);
>   }
> @@ -1134,6 +1141,11 @@ static int zynqmp_disp_create_layers(struct zynqmp_disp *disp)
>   		layer->id = i;
>   		layer->disp = disp;
>   		layer->info = &layer_info[i];
> +		/* For now assume dpsub works in either live or non-live mode for both layers.
> +		 * Hybrid mode is not supported yet.
> +		 */

This comment style is not according to the style guide, and in fact you 
fix it in the patch 4. So please fix it here instead.

  Tomi

> +		layer->mode = disp->dpsub->dma_enabled ? ZYNQMP_DPSUB_LAYER_NONLIVE
> +						       : ZYNQMP_DPSUB_LAYER_LIVE;
>   
>   		ret = zynqmp_disp_layer_request_dma(disp, layer);
>   		if (ret)
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.h b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> index 123cffac08be..9b8b202224d9 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_disp.h
> +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> @@ -42,16 +42,6 @@ enum zynqmp_dpsub_layer_id {
>   	ZYNQMP_DPSUB_LAYER_GFX,
>   };
>   
> -/**
> - * enum zynqmp_dpsub_layer_mode - Layer mode
> - * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
> - * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
> - */
> -enum zynqmp_dpsub_layer_mode {
> -	ZYNQMP_DPSUB_LAYER_NONLIVE,
> -	ZYNQMP_DPSUB_LAYER_LIVE,
> -};
> -
>   void zynqmp_disp_enable(struct zynqmp_disp *disp);
>   void zynqmp_disp_disable(struct zynqmp_disp *disp);
>   int zynqmp_disp_setup_clock(struct zynqmp_disp *disp,
> @@ -62,8 +52,7 @@ void zynqmp_disp_blend_set_global_alpha(struct zynqmp_disp *disp,
>   
>   u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
>   				   unsigned int *num_formats);
> -void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
> -			      enum zynqmp_dpsub_layer_mode mode);
> +void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer);
>   void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer);
>   void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
>   				  const struct drm_format_info *info);
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> index 1846c4971fd8..04b6bcac3b07 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> @@ -1295,7 +1295,7 @@ static void zynqmp_dp_disp_enable(struct zynqmp_dp *dp,
>   	/* TODO: Make the format configurable. */
>   	info = drm_format_info(DRM_FORMAT_YUV422);
>   	zynqmp_disp_layer_set_format(layer, info);
> -	zynqmp_disp_layer_enable(layer, ZYNQMP_DPSUB_LAYER_LIVE);
> +	zynqmp_disp_layer_enable(layer);
>   
>   	if (layer_id == ZYNQMP_DPSUB_LAYER_GFX)
>   		zynqmp_disp_blend_set_global_alpha(dp->dpsub->disp, true, 255);
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> index db3bb4afbfc4..43bf416b33d5 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> @@ -122,7 +122,7 @@ static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane,
>   
>   	/* Enable or re-enable the plane if the format has changed. */
>   	if (format_changed)
> -		zynqmp_disp_layer_enable(layer, ZYNQMP_DPSUB_LAYER_NONLIVE);
> +		zynqmp_disp_layer_enable(layer);
>   }
>   
>   static const struct drm_plane_helper_funcs zynqmp_dpsub_plane_helper_funcs = {
>