[PATCH v3 6/9] drm: xlnx: zynqmp_dpsub: Set input live format
Tomi Valkeinen
tomi.valkeinen at ideasonboard.com
Fri Apr 5 12:56:36 UTC 2024
On 21/03/2024 22:43, Anatoliy Klymenko wrote:
> Program live video input format according to selected media bus format.
>
> In the bridge mode of operation, DPSUB is connected to FPGA CRTC which
> almost certainly supports a single media bus format as its output. Expect
> this to be delivered via the new bridge atomic state. Program DPSUB
> registers accordingly. Update zynqmp_disp_layer_set_format() API to fit
> both live and non-live layer types.
>
> Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko at amd.com>
> ---
> drivers/gpu/drm/xlnx/zynqmp_disp.c | 66 +++++++++++++++++++++++++-------------
> drivers/gpu/drm/xlnx/zynqmp_disp.h | 2 +-
> drivers/gpu/drm/xlnx/zynqmp_dp.c | 13 +++++---
> drivers/gpu/drm/xlnx/zynqmp_kms.c | 2 +-
> 4 files changed, 55 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> index 0c2b3f4bffa6..a385d22d428e 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_disp.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> @@ -436,19 +436,28 @@ static void zynqmp_disp_avbuf_set_format(struct zynqmp_disp *disp,
> const struct zynqmp_disp_format *fmt)
> {
> unsigned int i;
> - u32 val;
> + u32 val, reg;
>
> - val = zynqmp_disp_avbuf_read(disp, ZYNQMP_DISP_AV_BUF_FMT);
> - val &= zynqmp_disp_layer_is_video(layer)
> - ? ~ZYNQMP_DISP_AV_BUF_FMT_NL_VID_MASK
> - : ~ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_MASK;
> - val |= fmt->buf_fmt;
> - zynqmp_disp_avbuf_write(disp, ZYNQMP_DISP_AV_BUF_FMT, val);
> + layer->disp_fmt = fmt;
> + if (layer->mode == ZYNQMP_DPSUB_LAYER_NONLIVE) {
> + reg = ZYNQMP_DISP_AV_BUF_FMT;
> + val = zynqmp_disp_avbuf_read(disp, ZYNQMP_DISP_AV_BUF_FMT);
> + val &= zynqmp_disp_layer_is_video(layer)
> + ? ~ZYNQMP_DISP_AV_BUF_FMT_NL_VID_MASK
> + : ~ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_MASK;
> + val |= fmt->buf_fmt;
> + } else {
> + reg = zynqmp_disp_layer_is_video(layer)
> + ? ZYNQMP_DISP_AV_BUF_LIVE_VID_CONFIG
> + : ZYNQMP_DISP_AV_BUF_LIVE_GFX_CONFIG;
> + val = fmt->buf_fmt;
> + }
> + zynqmp_disp_avbuf_write(disp, reg, val);
Just write the registers inside the above if-else blocks.
>
> for (i = 0; i < ZYNQMP_DISP_AV_BUF_NUM_SF; i++) {
> - unsigned int reg = zynqmp_disp_layer_is_video(layer)
> - ? ZYNQMP_DISP_AV_BUF_VID_COMP_SF(i)
> - : ZYNQMP_DISP_AV_BUF_GFX_COMP_SF(i);
> + reg = zynqmp_disp_layer_is_video(layer)
> + ? ZYNQMP_DISP_AV_BUF_VID_COMP_SF(i)
> + : ZYNQMP_DISP_AV_BUF_GFX_COMP_SF(i);
>
> zynqmp_disp_avbuf_write(disp, reg, fmt->sf[i]);
> }
> @@ -902,25 +911,33 @@ static void zynqmp_disp_audio_disable(struct zynqmp_disp *disp)
> */
>
> /**
> - * zynqmp_disp_layer_find_format - Find format information for a DRM format
> + * zynqmp_disp_layer_find_format - Find format information for a DRM or media
> + * bus format
> * @layer: The layer
> - * @drm_fmt: DRM format to search
> + * @drm_or_bus_format: DRM or media bus format
> *
> * Search display subsystem format information corresponding to the given DRM
> - * format @drm_fmt for the @layer, and return a pointer to the format
> - * descriptor.
> + * or media bus format @drm_or_bus_format for the @layer, and return a pointer
> + * to the format descriptor. Search key choice depends on @layer mode, for live
> + * layers search is done by zynqmp_disp_format.bus_fmt, and for non-live layers
> + * zynqmp_disp_format.drm_fmt is used.
Here also I recommend creating separate funcs for the fourcc and mbus
versions. They are different types, even if they happen to fit into u32.
> *
> * Return: A pointer to the format descriptor if found, NULL otherwise
> */
> static const struct zynqmp_disp_format *
> zynqmp_disp_layer_find_format(struct zynqmp_disp_layer *layer,
> - u32 drm_fmt)
> + u32 drm_or_bus_format)
> {
> unsigned int i;
> + const struct zynqmp_disp_format *disp_format;
>
> for (i = 0; i < layer->info->num_formats; i++) {
> - if (layer->info->formats[i].drm_fmt == drm_fmt)
> - return &layer->info->formats[i];
> + disp_format = &layer->info->formats[i];
> + if ((layer->mode == ZYNQMP_DPSUB_LAYER_LIVE &&
> + disp_format->bus_fmt == drm_or_bus_format) ||
> + (layer->mode == ZYNQMP_DPSUB_LAYER_NONLIVE &&
> + disp_format->drm_fmt == drm_or_bus_format))
> + return disp_format;
> }
>
> return NULL;
> @@ -992,20 +1009,25 @@ void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer)
> /**
> * zynqmp_disp_layer_set_format - Set the layer format
> * @layer: The layer
> - * @info: The format info
> + * @drm_or_bus_format: DRM or media bus format
> *
> * Set the format for @layer to @info. The layer must be disabled.
> */
> void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
> - const struct drm_format_info *info)
> + u32 drm_or_bus_format)
And here, with a quick look, a separate function would be fine.
Tomi
> {
> unsigned int i;
>
> - layer->disp_fmt = zynqmp_disp_layer_find_format(layer, info->format);
> - layer->drm_fmt = info;
> + layer->disp_fmt = zynqmp_disp_layer_find_format(layer, drm_or_bus_format);
> + if (WARN_ON(!layer->disp_fmt))
> + return;
>
> zynqmp_disp_avbuf_set_format(layer->disp, layer, layer->disp_fmt);
>
> + layer->drm_fmt = drm_format_info(layer->disp_fmt->drm_fmt);
> + if (!layer->drm_fmt)
> + return;
> +
> if (layer->mode == ZYNQMP_DPSUB_LAYER_LIVE)
> return;
>
> @@ -1013,7 +1035,7 @@ void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
> * Set pconfig for each DMA channel to indicate they're part of a
> * video group.
> */
> - for (i = 0; i < info->num_planes; i++) {
> + for (i = 0; i < layer->drm_fmt->num_planes; i++) {
> struct zynqmp_disp_layer_dma *dma = &layer->dmas[i];
> struct xilinx_dpdma_peripheral_config pconfig = {
> .video_group = true,
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.h b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> index 88c285a12e23..9f9a5f50ffbc 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_disp.h
> +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> @@ -55,7 +55,7 @@ u32 *zynqmp_disp_layer_formats(struct zynqmp_disp_layer *layer,
> void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer);
> void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer);
> void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
> - const struct drm_format_info *info);
> + u32 drm_or_bus_format);
> int zynqmp_disp_layer_update(struct zynqmp_disp_layer *layer,
> struct drm_plane_state *state);
>
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> index e3b9eb3d9273..200e63636006 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> @@ -1299,15 +1299,20 @@ static void zynqmp_dp_disp_enable(struct zynqmp_dp *dp,
> struct drm_bridge_state *old_bridge_state)
> {
> struct zynqmp_disp_layer *layer;
> - const struct drm_format_info *info;
> + struct drm_bridge_state *bridge_state;
> + u32 bus_fmt;
>
> layer = zynqmp_dp_disp_connected_live_layer(dp);
> if (!layer)
> return;
>
> - /* TODO: Make the format configurable. */
> - info = drm_format_info(DRM_FORMAT_YUV422);
> - zynqmp_disp_layer_set_format(layer, info);
> + bridge_state = drm_atomic_get_new_bridge_state(old_bridge_state->base.state,
> + old_bridge_state->bridge);
> + if (WARN_ON(!bridge_state))
> + return;
> +
> + bus_fmt = bridge_state->input_bus_cfg.format;
> + zynqmp_disp_layer_set_format(layer, bus_fmt);
> zynqmp_disp_layer_enable(layer);
>
> if (layer == dp->dpsub->layers[ZYNQMP_DPSUB_LAYER_GFX])
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> index bf9fba01df0e..d96b3f3f2e3a 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> @@ -111,7 +111,7 @@ static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane,
> if (old_state->fb)
> zynqmp_disp_layer_disable(layer);
>
> - zynqmp_disp_layer_set_format(layer, new_state->fb->format);
> + zynqmp_disp_layer_set_format(layer, new_state->fb->format->format);
> }
>
> zynqmp_disp_layer_update(layer, new_state);
>
More information about the dri-devel
mailing list