[PATCH] ARM: dts: bcm2835: Enable 3D rendering through V3D

[Stefan Wahren]

Hi Phil,

Am 14.04.24 um 20:43 schrieb Phil Elwell:
> Hello all,
>
> On Fri, 12 Apr 2024 at 18:17, Stefan Wahren <wahrenst at gmx.net> wrote:
>> Hi Maíra,
>>
>> [add Phil & Dave]
>>
>> Am 12.04.24 um 15:25 schrieb Maíra Canal:
>>> RPi 0-3 is packed with a GPU that provides 3D rendering capabilities to
>>> the RPi. Currently, the downstream kernel uses an overlay to enable the
>>> GPU and use GPU hardware acceleration. When deploying a mainline kernel
>>> to the RPi 0-3, we end up without any GPU hardware acceleration
>>> (essentially, we can't use the OpenGL driver).
>>>
>>> Therefore, enable the V3D core for the RPi 0-3 in the mainline kernel.
>> thanks for trying to improve the combination Raspberry Pi OS + Mainline
>> Kernel. I think i'm able to reproduce the issue with Raspberry Pi 3 B +
>> on Buster.
> Buster? We launched Buster with 4.19 and ended on 5.10. We've moved
> onto Bookworm now. A lot has changed in that time...
Sorry, i meant Bullseye but yes it's not up to date. Anyway i cannot see
a problem with the devicetree.