[PATCH 05/10] arm64: dts: qcom: pmk8550: Add PWM controller

[Xilin Wu via B4 Relay]

From: Xilin Wu <wuxilin123 at gmail.com>

Add the PWM function to the pmk8550 dtsi, which is usually used
to control PWM backlight on platforms using this PMIC.

Signed-off-by: Xilin Wu <wuxilin123 at gmail.com>
---
 arch/arm64/boot/dts/qcom/pmk8550.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
index c7ac9b2eaacf..8d43fbb85263 100644
--- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -73,5 +73,15 @@ pmk8550_gpios: gpio at 8800 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmk8550_pwm: pwm {
+			compatible = "qcom,pmk8550-pwm";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
 	};
 };

-- 
2.44.0