[PATCH v3 1/2] drm/mipi-dsi: add more multi functions for better error handling
Jessica Zhang
quic_jesszhan at quicinc.com
Thu Aug 8 21:19:39 UTC 2024
On 8/6/2024 6:59 AM, Tejas Vipin wrote:
> Add more functions that can benefit from being multi style and mark
> older variants as deprecated to eventually convert all mipi_dsi functions
> to multi style.
>
> Acked-by: Maxime Ripard <mripard at kernel.org>
> Signed-off-by: Tejas Vipin <tejasvipin76 at gmail.com>
Acked-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> ---
> drivers/gpu/drm/drm_mipi_dsi.c | 194 +++++++++++++++++++++++++++++++++
> include/drm/drm_mipi_dsi.h | 10 ++
> 2 files changed, 204 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
> index a471c46f5ca6..8d0a866cf1e0 100644
> --- a/drivers/gpu/drm/drm_mipi_dsi.c
> +++ b/drivers/gpu/drm/drm_mipi_dsi.c
> @@ -603,6 +603,8 @@ EXPORT_SYMBOL(mipi_dsi_shutdown_peripheral);
> * mipi_dsi_turn_on_peripheral() - sends a Turn On Peripheral command
> * @dsi: DSI peripheral device
> *
> + * This function is deprecated. Use mipi_dsi_turn_on_peripheral_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi)
> @@ -652,6 +654,7 @@ EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
> * @pps_selector: Select PPS from the table of pre-stored or uploaded PPS entries
> *
> * Enable or disable Display Stream Compression on the peripheral.
> + * This function is deprecated. Use mipi_dsi_compression_mode_ext_multi() instead.
> *
> * Return: 0 on success or a negative error code on failure.
> */
> @@ -703,6 +706,7 @@ EXPORT_SYMBOL(mipi_dsi_compression_mode);
> * @pps: VESA DSC 1.1 Picture Parameter Set
> *
> * Transmit the VESA DSC 1.1 Picture Parameter Set to the peripheral.
> + * This function is deprecated. Use mipi_dsi_picture_parameter_set_multi() instead.
> *
> * Return: 0 on success or a negative error code on failure.
> */
> @@ -1037,6 +1041,8 @@ EXPORT_SYMBOL(mipi_dsi_dcs_read);
> * mipi_dsi_dcs_nop() - send DCS nop packet
> * @dsi: DSI peripheral device
> *
> + * This function is deprecated. Use mipi_dsi_dcs_nop_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi)
> @@ -1055,6 +1061,8 @@ EXPORT_SYMBOL(mipi_dsi_dcs_nop);
> * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
> * @dsi: DSI peripheral device
> *
> + * This function is deprecated. Use mipi_dsi_dcs_soft_reset_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi)
> @@ -1124,6 +1132,8 @@ EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format);
> * display module except interface communication
> * @dsi: DSI peripheral device
> *
> + * This function is deprecated. Use mipi_dsi_dcs_enter_sleep_mode_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi)
> @@ -1143,6 +1153,8 @@ EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode);
> * module
> * @dsi: DSI peripheral device
> *
> + * This function is deprecated. Use mipi_dsi_dcs_exit_sleep_mode_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi)
> @@ -1162,6 +1174,8 @@ EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode);
> * display device
> * @dsi: DSI peripheral device
> *
> + * This function is deprecated. Use mipi_dsi_dcs_set_display_off_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi)
> @@ -1181,6 +1195,8 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off);
> * display device
> * @dsi: DSI peripheral device
> *
> + * This function is deprecated. Use mipi_dsi_dcs_set_display_on_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure
> */
> int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
> @@ -1202,6 +1218,9 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
> * @start: first column of frame memory
> * @end: last column of frame memory
> *
> + * This function is deprecated. Use mipi_dsi_dcs_set_column_address_multi()
> + * instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
> @@ -1226,6 +1245,9 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address);
> * @start: first page of frame memory
> * @end: last page of frame memory
> *
> + * This function is deprecated. Use mipi_dsi_dcs_set_page_address_multi()
> + * instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
> @@ -1268,6 +1290,8 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off);
> * @dsi: DSI peripheral device
> * @mode: the Tearing Effect Output Line mode
> *
> + * This function is deprecated. Use mipi_dsi_dcs_set_tear_on_multi() instead.
> + *
> * Return: 0 on success or a negative error code on failure
> */
> int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
> @@ -1291,6 +1315,9 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
> * @dsi: DSI peripheral device
> * @format: pixel format
> *
> + * This function is deprecated. Use mipi_dsi_dcs_set_pixel_format_multi()
> + * instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
> @@ -1334,6 +1361,9 @@ EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
> * @dsi: DSI peripheral device
> * @brightness: brightness value
> *
> + * This function is deprecated. Use mipi_dsi_dcs_set_display_brightness_multi()
> + * instead.
> + *
> * Return: 0 on success or a negative error code on failure.
> */
> int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
> @@ -1639,6 +1669,170 @@ void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx,
> }
> EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on_multi);
>
> +/**
> + * mipi_dsi_turn_on_peripheral_multi() - sends a Turn On Peripheral command
> + * @ctx: Context for multiple DSI transactions
> + *
> + * Like mipi_dsi_turn_on_peripheral() but deals with errors in a way that
> + * makes it convenient to make several calls in a row.
> + */
> +void mipi_dsi_turn_on_peripheral_multi(struct mipi_dsi_multi_context *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (ctx->accum_err)
> + return;
> +
> + ret = mipi_dsi_turn_on_peripheral(dsi);
> + if (ret < 0) {
> + ctx->accum_err = ret;
> + dev_err(dev, "Failed to turn on peripheral: %d\n",
> + ctx->accum_err);
> + }
> +}
> +EXPORT_SYMBOL(mipi_dsi_turn_on_peripheral_multi);
> +
> +/**
> + * mipi_dsi_dcs_soft_reset_multi() - perform a software reset of the display module
> + * @ctx: Context for multiple DSI transactions
> + *
> + * Like mipi_dsi_dcs_soft_reset() but deals with errors in a way that
> + * makes it convenient to make several calls in a row.
> + */
> +void mipi_dsi_dcs_soft_reset_multi(struct mipi_dsi_multi_context *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (ctx->accum_err)
> + return;
> +
> + ret = mipi_dsi_dcs_soft_reset(dsi);
> + if (ret < 0) {
> + ctx->accum_err = ret;
> + dev_err(dev, "Failed to mipi_dsi_dcs_soft_reset: %d\n",
> + ctx->accum_err);
> + }
> +}
> +EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset_multi);
> +
> +/**
> + * mipi_dsi_dcs_set_display_brightness_multi() - sets the brightness value of
> + * the display
> + * @ctx: Context for multiple DSI transactions
> + * @brightness: brightness value
> + *
> + * Like mipi_dsi_dcs_set_display_brightness() but deals with errors in a way that
> + * makes it convenient to make several calls in a row.
> + */
> +void mipi_dsi_dcs_set_display_brightness_multi(struct mipi_dsi_multi_context *ctx,
> + u16 brightness)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (ctx->accum_err)
> + return;
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> + if (ret < 0) {
> + ctx->accum_err = ret;
> + dev_err(dev, "Failed to write display brightness: %d\n",
> + ctx->accum_err);
> + }
> +}
> +EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness_multi);
> +
> +/**
> + * mipi_dsi_dcs_set_pixel_format_multi() - sets the pixel format for the RGB image
> + * data used by the interface
> + * @ctx: Context for multiple DSI transactions
> + * @format: pixel format
> + *
> + * Like mipi_dsi_dcs_set_pixel_format() but deals with errors in a way that
> + * makes it convenient to make several calls in a row.
> + */
> +void mipi_dsi_dcs_set_pixel_format_multi(struct mipi_dsi_multi_context *ctx,
> + u8 format)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (ctx->accum_err)
> + return;
> +
> + ret = mipi_dsi_dcs_set_pixel_format(dsi, format);
> + if (ret < 0) {
> + ctx->accum_err = ret;
> + dev_err(dev, "Failed to set pixel format: %d\n",
> + ctx->accum_err);
> + }
> +}
> +EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format_multi);
> +
> +/**
> + * mipi_dsi_dcs_set_column_address_multi() - define the column extent of the
> + * frame memory accessed by the host processor
> + * @ctx: Context for multiple DSI transactions
> + * @start: first column of frame memory
> + * @end: last column of frame memory
> + *
> + * Like mipi_dsi_dcs_set_column_address() but deals with errors in a way that
> + * makes it convenient to make several calls in a row.
> + */
> +void mipi_dsi_dcs_set_column_address_multi(struct mipi_dsi_multi_context *ctx,
> + u16 start, u16 end)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (ctx->accum_err)
> + return;
> +
> + ret = mipi_dsi_dcs_set_column_address(dsi, start, end);
> + if (ret < 0) {
> + ctx->accum_err = ret;
> + dev_err(dev, "Failed to set column address: %d\n",
> + ctx->accum_err);
> + }
> +}
> +EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address_multi);
> +
> +/**
> + * mipi_dsi_dcs_set_page_address_multi() - define the page extent of the
> + * frame memory accessed by the host processor
> + * @ctx: Context for multiple DSI transactions
> + * @start: first page of frame memory
> + * @end: last page of frame memory
> + *
> + * Like mipi_dsi_dcs_set_page_address() but deals with errors in a way that
> + * makes it convenient to make several calls in a row.
> + */
> +void mipi_dsi_dcs_set_page_address_multi(struct mipi_dsi_multi_context *ctx,
> + u16 start, u16 end)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + if (ctx->accum_err)
> + return;
> +
> + ret = mipi_dsi_dcs_set_page_address(dsi, start, end);
> + if (ret < 0) {
> + ctx->accum_err = ret;
> + dev_err(dev, "Failed to set page address: %d\n",
> + ctx->accum_err);
> + }
> +}
> +EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address_multi);
> +
> static int mipi_dsi_drv_probe(struct device *dev)
> {
> struct mipi_dsi_driver *drv = to_mipi_dsi_driver(dev->driver);
> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
> index 0f520eeeaa8e..602be6ce081a 100644
> --- a/include/drm/drm_mipi_dsi.h
> +++ b/include/drm/drm_mipi_dsi.h
> @@ -365,6 +365,16 @@ void mipi_dsi_dcs_set_display_off_multi(struct mipi_dsi_multi_context *ctx);
> void mipi_dsi_dcs_set_display_on_multi(struct mipi_dsi_multi_context *ctx);
> void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx,
> enum mipi_dsi_dcs_tear_mode mode);
> +void mipi_dsi_turn_on_peripheral_multi(struct mipi_dsi_multi_context *ctx);
> +void mipi_dsi_dcs_soft_reset_multi(struct mipi_dsi_multi_context *ctx);
> +void mipi_dsi_dcs_set_display_brightness_multi(struct mipi_dsi_multi_context *ctx,
> + u16 brightness);
> +void mipi_dsi_dcs_set_pixel_format_multi(struct mipi_dsi_multi_context *ctx,
> + u8 format);
> +void mipi_dsi_dcs_set_column_address_multi(struct mipi_dsi_multi_context *ctx,
> + u16 start, u16 end);
> +void mipi_dsi_dcs_set_page_address_multi(struct mipi_dsi_multi_context *ctx,
> + u16 start, u16 end);
>
> /**
> * mipi_dsi_generic_write_seq - transmit data using a generic write packet
> --
> 2.46.0
>
More information about the dri-devel
mailing list