[RFC PATCH 08/17] drm/vkms: Allow to configure multiple connectors
Louis Chauvet
louis.chauvet at bootlin.com
Tue Aug 13 17:58:58 UTC 2024
Le 13/08/24 - 12:44, José Expósito a écrit :
> Add a list of connector configurations to vkms_config and add as many
> connector as configured during output initialization.
>
> For backwards compatibility, create a single connector in the default
> configuration.
>
> Signed-off-by: José Expósito <jose.exposito89 at gmail.com>
> ---
> drivers/gpu/drm/vkms/vkms_config.c | 40 ++++++++++++++++++++++++++++++
> drivers/gpu/drm/vkms/vkms_config.h | 12 +++++++++
> drivers/gpu/drm/vkms/vkms_output.c | 11 +++++---
> 3 files changed, 59 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/vkms/vkms_config.c b/drivers/gpu/drm/vkms/vkms_config.c
> index 6a8dfebee24e..a456f9db3c66 100644
> --- a/drivers/gpu/drm/vkms/vkms_config.c
> +++ b/drivers/gpu/drm/vkms/vkms_config.c
> @@ -19,6 +19,7 @@ struct vkms_config *vkms_config_create(char *dev_name)
> config->dev_name = dev_name;
> config->crtcs = (struct list_head)LIST_HEAD_INIT(config->crtcs);
> config->encoders = (struct list_head)LIST_HEAD_INIT(config->encoders);
> + config->connectors = (struct list_head)LIST_HEAD_INIT(config->connectors);
Again, this cast seems useless
> return config;
> }
> @@ -30,6 +31,7 @@ struct vkms_config *vkms_config_default_create(bool enable_cursor,
> struct vkms_config *config;
> struct vkms_config_crtc *crtc_cfg;
> struct vkms_config_encoder *encoder_cfg;
> + struct vkms_config_connector *connector_cfg;
>
> config = vkms_config_create(DEFAULT_DEVICE_NAME);
> if (IS_ERR(config))
> @@ -46,6 +48,10 @@ struct vkms_config *vkms_config_default_create(bool enable_cursor,
> if (IS_ERR(encoder_cfg))
> return ERR_CAST(encoder_cfg);
>
> + connector_cfg = vkms_config_add_connector(config, BIT(0));
> + if (IS_ERR(connector_cfg))
> + return ERR_CAST(connector_cfg);
> +
The config pointer is leaked here.
> return config;
> }
>
> @@ -53,6 +59,7 @@ void vkms_config_destroy(struct vkms_config *config)
> {
> struct vkms_config_crtc *crtc_cfg, *crtc_tmp;
> struct vkms_config_encoder *encoder_cfg, *encoder_tmp;
> + struct vkms_config_connector *connector_cfg, *connector_tmp;
>
> list_for_each_entry_safe(crtc_cfg, crtc_tmp, &config->crtcs, list)
> vkms_config_destroy_crtc(config, crtc_cfg);
> @@ -60,6 +67,9 @@ void vkms_config_destroy(struct vkms_config *config)
> list_for_each_entry_safe(encoder_cfg, encoder_tmp, &config->encoders, list)
> vkms_config_destroy_encoder(config, encoder_cfg);
>
> + list_for_each_entry_safe(connector_cfg, connector_tmp, &config->connectors, list)
> + vkms_config_destroy_connector(config, connector_cfg);
> +
> kfree(config);
> }
>
> @@ -70,6 +80,7 @@ static int vkms_config_show(struct seq_file *m, void *data)
> struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> struct vkms_config_crtc *crtc_cfg;
> struct vkms_config_encoder *encoder_cfg;
> + struct vkms_config_connector *connector_cfg;
> int n;
>
> seq_printf(m, "dev_name=%s\n", vkmsdev->config->dev_name);
> @@ -90,6 +101,13 @@ static int vkms_config_show(struct seq_file *m, void *data)
> n++;
> }
>
> + n = 0;
> + list_for_each_entry(connector_cfg, &vkmsdev->config->connectors, list) {
> + seq_printf(m, "connector(%d).possible_encoders=%d\n", n,
> + connector_cfg->possible_encoders);
> + n++;
> + }
> +
> return 0;
> }
>
> @@ -166,3 +184,25 @@ void vkms_config_destroy_encoder(struct vkms_config *config,
> list_del(&encoder_cfg->list);
> kfree(encoder_cfg);
> }
> +
> +struct vkms_config_connector *vkms_config_add_connector(struct vkms_config *config,
> + uint32_t possible_encoders)
> +{
> + struct vkms_config_connector *connector_cfg;
> +
> + connector_cfg = kzalloc(sizeof(*connector_cfg), GFP_KERNEL);
> + if (!connector_cfg)
> + return ERR_PTR(-ENOMEM);
> +
> + connector_cfg->possible_encoders = possible_encoders;
For config_encoder destruction you need to remove it from this
possible_encoders list.
> + list_add_tail(&connector_cfg->list, &config->connectors);
> +
> + return connector_cfg;
> +}
> +
> +void vkms_config_destroy_connector(struct vkms_config *config,
> + struct vkms_config_connector *connector_cfg)
> +{
> + list_del(&connector_cfg->list);
> + kfree(connector_cfg);
> +}
> diff --git a/drivers/gpu/drm/vkms/vkms_config.h b/drivers/gpu/drm/vkms/vkms_config.h
> index b717b5c0d3d9..f1dd59fc6300 100644
> --- a/drivers/gpu/drm/vkms/vkms_config.h
> +++ b/drivers/gpu/drm/vkms/vkms_config.h
> @@ -20,12 +20,18 @@ struct vkms_config_encoder {
> uint32_t possible_crtcs;
> };
>
> +struct vkms_config_connector {
> + struct list_head list;
> + uint32_t possible_encoders;
> +};
> +
> struct vkms_config {
> char *dev_name;
> bool cursor;
> bool overlay;
> struct list_head crtcs;
> struct list_head encoders;
> + struct list_head connectors;
> /* only set when instantiated */
> struct vkms_device *dev;
> };
> @@ -52,4 +58,10 @@ struct vkms_config_encoder *vkms_config_add_encoder(struct vkms_config *config,
> void vkms_config_destroy_encoder(struct vkms_config *config,
> struct vkms_config_encoder *encoder_cfg);
>
> +/* Connectors */
> +struct vkms_config_connector *vkms_config_add_connector(struct vkms_config *config,
> + uint32_t possible_encoders);
> +void vkms_config_destroy_connector(struct vkms_config *config,
> + struct vkms_config_connector *connector_cfg);
> +
> #endif /* _VKMS_CONFIG_H_ */
> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> index 4413cf88afc7..021a491de817 100644
> --- a/drivers/gpu/drm/vkms/vkms_output.c
> +++ b/drivers/gpu/drm/vkms/vkms_output.c
> @@ -100,6 +100,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> {
> struct drm_device *dev = &vkmsdev->drm;
> struct drm_connector *connector;
> + struct vkms_config_connector *connector_cfg;
> struct drm_encoder *encoder;
> struct vkms_config_encoder *encoder_cfg;
> struct vkms_crtc *vkms_crtc;
> @@ -142,10 +143,6 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> }
> }
>
> - connector = vkms_connector_init(vkmsdev, BIT(index));
> - if (IS_ERR(connector))
> - return PTR_ERR(connector);
> -
> list_for_each_entry(encoder_cfg, &vkmsdev->config->encoders, list) {
> encoder = vkms_encoder_init(vkmsdev, encoder_cfg->possible_crtcs,
> encoder_cfg->index);
> @@ -153,6 +150,12 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
> return PTR_ERR(encoder);
> }
>
> + list_for_each_entry(connector_cfg, &vkmsdev->config->connectors, list) {
> + connector = vkms_connector_init(vkmsdev, connector_cfg->possible_encoders);
> + if (IS_ERR(connector))
> + return PTR_ERR(connector);
> + }
> +
> drm_mode_config_reset(dev);
>
> return 0;
> --
> 2.46.0
>
--
Louis Chauvet, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
More information about the dri-devel
mailing list