[RFC PATCH 10/17] drm/vkms: Allow to change connector status

Louis Chauvet louis.chauvet at bootlin.com
Tue Aug 13 17:58:58 UTC 2024


Le 13/08/24 - 12:44, José Expósito a écrit :
> Store the connector status in vkms_config_connector and use the stored
> value to update the connector status in the drm_connector_funcs.detect()
> function.

I did not work on this part, so my comments may be not relevant.
 
> Signed-off-by: José Expósito <jose.exposito89 at gmail.com>
> ---
>  drivers/gpu/drm/vkms/vkms_config.c | 18 ++++++++++++++++--
>  drivers/gpu/drm/vkms/vkms_config.h | 12 +++++++++++-
>  drivers/gpu/drm/vkms/vkms_output.c | 20 ++++++++++++++++++++
>  3 files changed, 47 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vkms/vkms_config.c b/drivers/gpu/drm/vkms/vkms_config.c
> index d95a42a6745a..e8e5c02c9d43 100644
> --- a/drivers/gpu/drm/vkms/vkms_config.c
> +++ b/drivers/gpu/drm/vkms/vkms_config.c
> @@ -3,6 +3,7 @@
>  #include <linux/slab.h>
>  
>  #include <drm/drm_print.h>
> +#include <drm/drm_probe_helper.h>
>  #include <drm/drm_debugfs.h>
>  
>  #include "vkms_config.h"
> @@ -56,7 +57,7 @@ struct vkms_config *vkms_config_default_create(bool enable_cursor,
>  	if (IS_ERR(encoder_cfg))
>  		return ERR_CAST(encoder_cfg);
>  
> -	connector_cfg = vkms_config_add_connector(config, BIT(0));
> +	connector_cfg = vkms_config_add_connector(config, BIT(0), connector_status_connected);
>  	if (IS_ERR(connector_cfg))
>  		return ERR_CAST(connector_cfg);
>  
> @@ -124,6 +125,8 @@ static int vkms_config_show(struct seq_file *m, void *data)
>  	list_for_each_entry(connector_cfg, &vkmsdev->config->connectors, list) {
>  		seq_printf(m, "connector(%d).possible_encoders=%d\n", n,
>  			   connector_cfg->possible_encoders);
> +		seq_printf(m, "connector(%d).status=%d\n", n,
> +			   connector_cfg->status);
>  		n++;
>  	}
>  
> @@ -229,7 +232,8 @@ void vkms_config_destroy_encoder(struct vkms_config *config,
>  }
>  
>  struct vkms_config_connector *vkms_config_add_connector(struct vkms_config *config,
> -							uint32_t possible_encoders)
> +							uint32_t possible_encoders,
> +							enum drm_connector_status status)
>  {
>  	struct vkms_config_connector *connector_cfg;
>  
> @@ -238,6 +242,7 @@ struct vkms_config_connector *vkms_config_add_connector(struct vkms_config *conf
>  		return ERR_PTR(-ENOMEM);
>  
>  	connector_cfg->possible_encoders = possible_encoders;
> +	connector_cfg->status = status;
>  	list_add_tail(&connector_cfg->list, &config->connectors);
>  
>  	return connector_cfg;
> @@ -249,3 +254,12 @@ void vkms_config_destroy_connector(struct vkms_config *config,
>  	list_del(&connector_cfg->list);
>  	kfree(connector_cfg);
>  }
> +
> +void vkms_update_connector_status(struct vkms_config *config,
> +				  struct vkms_config_connector *connector_cfg,
> +				  enum drm_connector_status status)
> +{
> +	connector_cfg->status = status;
> +	if (config->dev)
> +		drm_kms_helper_hotplug_event(&config->dev->drm);
> +}
> diff --git a/drivers/gpu/drm/vkms/vkms_config.h b/drivers/gpu/drm/vkms/vkms_config.h
> index 25dab63e7ae7..3237406fa3a3 100644
> --- a/drivers/gpu/drm/vkms/vkms_config.h
> +++ b/drivers/gpu/drm/vkms/vkms_config.h
> @@ -6,6 +6,8 @@
>  #include <linux/list.h>
>  #include <linux/types.h>
>  
> +#include <drm/drm_connector.h>
> +
>  struct vkms_device;
>  
>  struct vkms_config_plane {
> @@ -29,6 +31,9 @@ struct vkms_config_encoder {
>  struct vkms_config_connector {
>  	struct list_head list;
>  	uint32_t possible_encoders;
> +	enum drm_connector_status status;
> +	/* only set when instantiated */
> +	struct drm_connector *connector;

It seems very strange to have a "dynamic" field (status) in a 
configuration structure.

>  };
>  
>  struct vkms_config {
> @@ -72,8 +77,13 @@ void vkms_config_destroy_encoder(struct vkms_config *config,
>  
>  /* Connectors */
>  struct vkms_config_connector *vkms_config_add_connector(struct vkms_config *config,
> -							uint32_t possible_encoders);
> +							uint32_t possible_encoders,
> +							enum drm_connector_status status);
>  void vkms_config_destroy_connector(struct vkms_config *config,
>  				   struct vkms_config_connector *connector_cfg);
>  
> +void vkms_update_connector_status(struct vkms_config *config,
> +				  struct vkms_config_connector *connector_cfg,
> +				  enum drm_connector_status status);
> +
>  #endif /* _VKMS_CONFIG_H_ */
> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> index a5b1ab326cdd..511cc2c14c44 100644
> --- a/drivers/gpu/drm/vkms/vkms_output.c
> +++ b/drivers/gpu/drm/vkms/vkms_output.c
> @@ -7,7 +7,25 @@
>  #include <drm/drm_managed.h>
>  #include <drm/drm_probe_helper.h>
>  
> +static enum drm_connector_status vkms_connector_detect(struct drm_connector *connector,
> +						       bool force)
> +{
> +	struct vkms_device *vkmsdev = drm_device_to_vkms_device(connector->dev);
> +	enum drm_connector_status status = connector->status;
> +	struct vkms_config_connector *connector_cfg;
> +
> +	list_for_each_entry(connector_cfg, &vkmsdev->config->connectors, list) {
> +		if (connector_cfg->connector == connector) {
> +			status = connector_cfg->status;
> +			break;
> +		}
> +	}

To avoid this, maybe we can create a vkms_connector:

	struct vkms_connector {
		int status;
		struct drm_connector base;
	};

and use container_of?

> +
> +	return status;
> +}
> +
>  static const struct drm_connector_funcs vkms_connector_funcs = {
> +	.detect = vkms_connector_detect,
>  	.fill_modes = drm_helper_probe_single_connector_modes,
>  	.reset = drm_atomic_helper_connector_reset,
>  	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> @@ -155,6 +173,8 @@ int vkms_output_init(struct vkms_device *vkmsdev)
>  		connector = vkms_connector_init(vkmsdev, connector_cfg->possible_encoders);
>  		if (IS_ERR(connector))
>  			return PTR_ERR(connector);
> +
> +		connector_cfg->connector = connector;
>  	}
>  
>  	drm_mode_config_reset(dev);
> -- 
> 2.46.0
> 

-- 
Louis Chauvet, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com


More information about the dri-devel mailing list