[PATCH 3/3] drm/vkms: Add documentation

Louis Chauvet louis.chauvet at bootlin.com
Wed Aug 14 08:47:00 UTC 2024


Add documentation around vkms_output and its initialization.

Signed-off-by: Louis Chauvet <louis.chauvet at bootlin.com>
---
 drivers/gpu/drm/vkms/vkms_drv.h    | 81 ++++++++++++++++++++++++++++++++------
 drivers/gpu/drm/vkms/vkms_output.c | 12 +++++-
 2 files changed, 80 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
index 3028678e4f9b..8f6c9e67e671 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.h
+++ b/drivers/gpu/drm/vkms/vkms_drv.h
@@ -147,29 +147,51 @@ struct vkms_color_lut {
 };
 
 /**
- * vkms_crtc_state - Driver specific CRTC state
+ * struct vkms_crtc_state - Driver specific CRTC state
+ *
  * @base: base CRTC state
  * @composer_work: work struct to compose and add CRC entries
- * @n_frame_start: start frame number for computed CRC
- * @n_frame_end: end frame number for computed CRC
+ *
+ * @num_active_planes: Number of active planes
+ * @active_planes: List containing all the active planes (counted by
+ *  @num_active_planes). They should be stored in z-order.
+ * @active_writeback: Current active writeback job
+ * @gamma_lut: Look up table for gamma used in this CRTC
+ * @crc_pending: Protected by @vkms_output.composer_lock.
+ * @wb_pending: Protected by @vkms_output.composer_lock.
+ * @frame_start: Protected by @vkms_output.composer_lock.
+ * @frame_end: Protected by @vkms_output.composer_lock.
  */
 struct vkms_crtc_state {
 	struct drm_crtc_state base;
 	struct work_struct composer_work;
 
 	int num_active_planes;
-	/* stack of active planes for crc computation, should be in z order */
 	struct vkms_plane_state **active_planes;
 	struct vkms_writeback_job *active_writeback;
 	struct vkms_color_lut gamma_lut;
 
-	/* below four are protected by vkms_output.composer_lock */
 	bool crc_pending;
 	bool wb_pending;
 	u64 frame_start;
 	u64 frame_end;
 };
 
+/**
+ * struct vkms_output - Internal representation of all output components in vkms
+ *
+ * @crtc: Base crtc in drm
+ * @encoder: DRM encoder used for this output
+ * @connector: DRM connector used for this output
+ * @wb_connecter: DRM writeback connector used for this output
+ * @vblank_hrtimer:
+ * @period_ns:
+ * @composer_workq: Ordered workqueue for composer_work
+ * @lock: Lock used to project concurrent acces to the composer
+ * @composer_enabled: Protected by @lock.
+ * @composer_state:
+ * @composer_lock: Lock used internally to protect @composer_state members
+ */
 struct vkms_output {
 	struct drm_crtc crtc;
 	struct drm_encoder encoder;
@@ -177,28 +199,38 @@ struct vkms_output {
 	struct drm_writeback_connector wb_connector;
 	struct hrtimer vblank_hrtimer;
 	ktime_t period_ns;
-	/* ordered wq for composer_work */
 	struct workqueue_struct *composer_workq;
-	/* protects concurrent access to composer */
 	spinlock_t lock;
 
-	/* protected by @lock */
 	bool composer_enabled;
 	struct vkms_crtc_state *composer_state;
 
 	spinlock_t composer_lock;
 };
 
-struct vkms_device;
-
+/**
+ * struct vkms_config - General configuration for VKMS driver
+ *
+ * @writeback: If true, a writeback buffer can be attached to the CRTC
+ * @cursor: If true, a cursor plane is created in the VKMS device
+ * @overlay: If true, NUM_OVERLAY_PLANES will be created for the VKMS device
+ * @dev: Used to store the current vkms device. Only set when the device is instancied.
+ */
 struct vkms_config {
 	bool writeback;
 	bool cursor;
 	bool overlay;
-	/* only set when instantiated */
 	struct vkms_device *dev;
 };
 
+/**
+ * struct vkms_device - Description of a vkms device
+ *
+ * @drm - Base device in drm
+ * @platform - Associated platform device
+ * @output - Configuration and sub-components of the vkms device
+ * @config: Configuration used in this vkms device
+ */
 struct vkms_device {
 	struct drm_device drm;
 	struct platform_device *platform;
@@ -206,6 +238,10 @@ struct vkms_device {
 	const struct vkms_config *config;
 };
 
+/*
+ * The following helpers are used to convert a member of a struct into its parent.
+ */
+
 #define drm_crtc_to_vkms_output(target) \
 	container_of(target, struct vkms_output, crtc)
 
@@ -218,12 +254,33 @@ struct vkms_device {
 #define to_vkms_plane_state(target)\
 	container_of(target, struct vkms_plane_state, base.base)
 
-/* CRTC */
+/**
+ * vkms_crtc_init() - Initialize a crtc for vkms
+ * @dev: drm_device associated with the vkms buffer
+ * @crtc: uninitialized crtc device
+ * @primary: primary plane to attach to the crtc
+ * @cursor plane to attach to the crtc
+ */
 int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
 		   struct drm_plane *primary, struct drm_plane *cursor);
+/**
+ * vkms_output_init() - Initialize all sub-components needed for a vkms device.
+ *
+ * @vkmsdev: vkms device to initialize
+ * @possible_crtc_index: Crtc which can be attached to the planes. The caller must ensure that
+ * possible_crtc_index is positive and less or equals to 31.
+ */
 
 int vkms_output_init(struct vkms_device *vkmsdev, int possible_crtc_index);
 
+/**
+ * vkms_plane_init() - Initialize a plane
+ *
+ * @vkmsdev: vkms device containing the plane
+ * @type: type of plane to initialize
+ * @possible_crtc_index: Crtc which can be attached to the plane. The caller must ensure that
+ * possible_crtc_index is positive and less or equals to 31.
+ */
 struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
 				   enum drm_plane_type type, int possible_crtc_index);
 
diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
index d42ca7d10389..36db2c8923cb 100644
--- a/drivers/gpu/drm/vkms/vkms_output.c
+++ b/drivers/gpu/drm/vkms/vkms_output.c
@@ -21,6 +21,7 @@ static int vkms_conn_get_modes(struct drm_connector *connector)
 {
 	int count;
 
+	/* Use the default modes list from drm */
 	count = drm_add_modes_noedid(connector, XRES_MAX, YRES_MAX);
 	drm_set_preferred_mode(connector, XRES_DEF, YRES_DEF);
 
@@ -58,8 +59,13 @@ int vkms_output_init(struct vkms_device *vkmsdev, int possible_crtc_index)
 	int writeback;
 	unsigned int n;
 
+	/*
+	 * Initialize used plane. One primary plane is required to perform the composition.
+	 *
+	 * The overlay and cursor planes are not mandatory, but can be used to perform complex
+	 * composition.
+	 */
 	primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, possible_crtc_index);
-
 	if (IS_ERR(primary))
 		return PTR_ERR(primary);
 
@@ -96,6 +102,10 @@ int vkms_output_init(struct vkms_device *vkmsdev, int possible_crtc_index)
 		DRM_ERROR("Failed to init encoder\n");
 		goto err_encoder;
 	}
+	/*
+	 * This is an hardcoded value to select crtc for the encoder.
+	 * 1 here designate the first registered CRTC, the one allocated in [1]
+	 */
 	encoder->possible_crtcs = 1;
 
 	ret = drm_connector_attach_encoder(connector, encoder);

-- 
2.44.2



More information about the dri-devel mailing list