[PATCH v3 06/11] drm/ast: astdp: Transparently handle BMC support

[Thomas Zimmermann]

Permanently set the connector status to 'connected'. Return BMC modes
for connector if no display is attached to the physical DP connector.
Otherwise use EDID modes as before.

If the status of the physical connector changes, the driver still
generates a hotplug event. DRM clients will then reconfigure their
output to a mode appropriate for either physical display or BMC.

v3:
- use struct ast_connector.physical_status to handle BMC

Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe at redhat.com>
---
 drivers/gpu/drm/ast/ast_dp.c | 43 ++++++++++++++++++++++++++----------
 1 file changed, 31 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c
index ffbcc397ee6b..00b364f9a71e 100644
--- a/drivers/gpu/drm/ast/ast_dp.c
+++ b/drivers/gpu/drm/ast/ast_dp.c
@@ -319,12 +319,15 @@ static void ast_astdp_encoder_helper_atomic_enable(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct ast_device *ast = to_ast_device(dev);
+	struct ast_connector *ast_connector = &ast->output.astdp.connector;
 
-	ast_dp_power_on_off(dev, AST_DP_POWER_ON);
-	ast_dp_link_training(ast);
+	if (ast_connector->physical_status == connector_status_connected) {
+		ast_dp_power_on_off(dev, AST_DP_POWER_ON);
+		ast_dp_link_training(ast);
 
-	ast_wait_for_vretrace(ast);
-	ast_dp_set_on_off(dev, 1);
+		ast_wait_for_vretrace(ast);
+		ast_dp_set_on_off(dev, 1);
+	}
 }
 
 static void ast_astdp_encoder_helper_atomic_disable(struct drm_encoder *encoder,
@@ -348,15 +351,29 @@ static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = {
 
 static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector)
 {
-	struct drm_device *dev = connector->dev;
-	struct ast_device *ast = to_ast_device(dev);
-	const struct drm_edid *drm_edid;
+	struct ast_connector *ast_connector = to_ast_connector(connector);
 	int count;
 
-	drm_edid = drm_edid_read_custom(connector, ast_astdp_read_edid_block, ast);
-	drm_edid_connector_update(connector, drm_edid);
-	count = drm_edid_connector_add_modes(connector);
-	drm_edid_free(drm_edid);
+	if (ast_connector->physical_status == connector_status_connected) {
+		struct ast_device *ast = to_ast_device(connector->dev);
+		const struct drm_edid *drm_edid;
+
+		drm_edid = drm_edid_read_custom(connector, ast_astdp_read_edid_block, ast);
+		drm_edid_connector_update(connector, drm_edid);
+		count = drm_edid_connector_add_modes(connector);
+		drm_edid_free(drm_edid);
+	} else {
+		drm_edid_connector_update(connector, NULL);
+
+		/*
+		 * There's no EDID data without a connected monitor. Set BMC-
+		 * compatible modes in this case. The XGA default resolution
+		 * should work well for all BMCs.
+		 */
+		count = drm_add_modes_noedid(connector, 4096, 4096);
+		if (count)
+			drm_set_preferred_mode(connector, 1024, 768);
+	}
 
 	return count;
 }
@@ -385,9 +402,11 @@ static int ast_astdp_connector_helper_detect_ctx(struct drm_connector *connector
 
 	mutex_unlock(&ast->modeset_lock);
 
+	if (status != ast_connector->physical_status)
+		++connector->epoch_counter;
 	ast_connector->physical_status = status;
 
-	return status;
+	return connector_status_connected;
 }
 
 static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs = {
-- 
2.46.0