[PATCH v3 14/17] dt-bindings: usb: Add ports to google, cros-ec-typec for DP altmode
Stephen Boyd
swboyd at chromium.org
Mon Aug 19 22:38:28 UTC 2024
Add a DT graph binding to google,cros-ec-typec so that it can combine
DisplayPort (DP) and USB SuperSpeed (SS) data into a USB type-c endpoint
that is connected to the usb-c-connector node's SS endpoint. This also
allows us to connect the DP and USB nodes in the graph to the USB type-c
connectors, providing the full picture of the USB type-c data flows in
the system.
Allow there to be multiple typec nodes underneath the EC node so that
one DT graph exists per DP bridge. The EC is actually controlling TCPCs
and redrivers that combine the DP and USB signals together so this more
accurately reflects the hardware design without introducing yet another
DT node underneath the EC for USB type-c.
If the type-c ports are being shared between a single DP controller then
the ports need to know about each other and determine a policy to drive
DP to one type-c port. If the type-c ports each have their own dedicated
DP controller then they're able to operate independently and enter/exit
DP altmode independently as well. We can't connect the DP controller's
endpoint to one usb-c-connector port at 1 endpoint and the USB controller's
endpoint to another usb-c-connector port at 1 endpoint either because the
DP muxing case would have DP connected to two usb-c-connector endpoints
which the graph binding doesn't support.
Therefore, one typec node is required per the capabilities of the type-c
port(s) being managed. This also lets us indicate which type-c ports the
DP controller is wired to. For example, if DP was connected to ports 0
and 2, while port 1 was connected to another DP controller we wouldn't
be able to implement that without having some other DT property to
indicate which output ports are connected to the DP endpoint.
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: Conor Dooley <conor+dt at kernel.org>
Cc: Lee Jones <lee at kernel.org>
Cc: Benson Leung <bleung at chromium.org>
Cc: Guenter Roeck <groeck at chromium.org>
Cc: Prashant Malani <pmalani at chromium.org>
Cc: Tzung-Bi Shih <tzungbi at kernel.org>
Cc: <devicetree at vger.kernel.org>
Cc: <chrome-platform at lists.linux.dev>
Cc: Pin-yen Lin <treapking at chromium.org>
Signed-off-by: Stephen Boyd <swboyd at chromium.org>
---
.../bindings/mfd/google,cros-ec.yaml | 7 +-
.../bindings/usb/google,cros-ec-typec.yaml | 229 ++++++++++++++++++
2 files changed, 233 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index c991626dc22b..bbe28047d0c0 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -98,9 +98,6 @@ properties:
gpio-controller: true
- typec:
- $ref: /schemas/usb/google,cros-ec-typec.yaml#
-
ec-pwm:
$ref: /schemas/pwm/google,cros-ec-pwm.yaml#
deprecated: true
@@ -166,6 +163,10 @@ patternProperties:
type: object
$ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
+ "^typec(-[0-9])*$":
+ type: object
+ $ref: /schemas/usb/google,cros-ec-typec.yaml#
+
required:
- compatible
diff --git a/Documentation/devicetree/bindings/usb/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/usb/google,cros-ec-typec.yaml
index 5ec4a9777ea1..d4c5c92c78ce 100644
--- a/Documentation/devicetree/bindings/usb/google,cros-ec-typec.yaml
+++ b/Documentation/devicetree/bindings/usb/google,cros-ec-typec.yaml
@@ -26,6 +26,106 @@ properties:
'#size-cells':
const: 0
+ mux-gpios:
+ description: GPIOs indicating which way the DP mux is steered
+ maxItems: 1
+
+ no-hpd:
+ description: Indicates this endpoint doesn't signal HPD for DisplayPort
+ type: boolean
+
+ mode-switch:
+ $ref: usb-switch.yaml#properties/mode-switch
+
+ orientation-switch:
+ $ref: usb-switch.yaml#properties/orientation-switch
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port at 0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Output ports for combined DP and USB SS data
+ patternProperties:
+ "^endpoint@([0-8])$":
+ $ref: usb-switch.yaml#/$defs/usbc-out-endpoint
+ unevaluatedProperties: false
+
+ anyOf:
+ - required:
+ - endpoint at 0
+ - required:
+ - endpoint at 1
+ - required:
+ - endpoint at 2
+ - required:
+ - endpoint at 3
+ - required:
+ - endpoint at 4
+ - required:
+ - endpoint at 5
+ - required:
+ - endpoint at 6
+ - required:
+ - endpoint at 7
+ - required:
+ - endpoint at 8
+
+ port at 1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port to receive USB SuperSpeed (SS) data
+ patternProperties:
+ "^endpoint@([0-8])$":
+ $ref: usb-switch.yaml#/$defs/usbc-in-endpoint
+ unevaluatedProperties: false
+
+ anyOf:
+ - required:
+ - endpoint at 0
+ - required:
+ - endpoint at 1
+ - required:
+ - endpoint at 2
+ - required:
+ - endpoint at 3
+ - required:
+ - endpoint at 4
+ - required:
+ - endpoint at 5
+ - required:
+ - endpoint at 6
+ - required:
+ - endpoint at 7
+ - required:
+ - endpoint at 8
+
+ port at 2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description:
+ Input port to receive DisplayPort (DP) data
+ unevaluatedProperties: false
+
+ properties:
+ endpoint:
+ $ref: usb-switch.yaml#/$defs/dp-endpoint
+ unevaluatedProperties: false
+
+ required:
+ - endpoint
+
+ required:
+ - port at 0
+
+ anyOf:
+ - required:
+ - port at 1
+ - required:
+ - port at 2
+
patternProperties:
'^connector@[0-9a-f]+$':
$ref: /schemas/connector/usb-connector.yaml#
@@ -35,6 +135,40 @@ patternProperties:
required:
- compatible
+allOf:
+ - if:
+ required:
+ - no-hpd
+ then:
+ properties:
+ ports:
+ required:
+ - port at 2
+ - if:
+ required:
+ - mux-gpios
+ then:
+ properties:
+ ports:
+ required:
+ - port at 2
+ - if:
+ required:
+ - orientation-switch
+ then:
+ properties:
+ ports:
+ required:
+ - port at 2
+ - if:
+ required:
+ - mode-switch
+ then:
+ properties:
+ ports:
+ required:
+ - port at 2
+
additionalProperties: false
examples:
@@ -50,6 +184,8 @@ examples:
typec {
compatible = "google,cros-ec-typec";
+ orientation-switch;
+ mode-switch;
#address-cells = <1>;
#size-cells = <0>;
@@ -60,6 +196,99 @@ examples:
power-role = "dual";
data-role = "dual";
try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ usb_c0_hs: endpoint {
+ remote-endpoint = <&usb_hub_dfp3_hs>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ usb_c0_ss: endpoint {
+ remote-endpoint = <&cros_typec_c0_ss>;
+ };
+ };
+ };
+ };
+
+ connector at 1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ usb_c1_hs: endpoint {
+ remote-endpoint = <&usb_hub_dfp2_hs>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ usb_c1_ss: endpoint {
+ remote-endpoint = <&cros_typec_c1_ss>;
+ };
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cros_typec_c0_ss: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&usb_c0_ss>;
+ data-lanes = <0 1 2 3>;
+ };
+
+ cros_typec_c1_ss: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&usb_c1_ss>;
+ data-lanes = <2 3 0 1>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_in_0: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&usb_ss_0_out>;
+ };
+
+ usb_in_1: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&usb_ss_1_out>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ dp_in: endpoint {
+ remote-endpoint = <&dp_phy>;
+ data-lanes = <0 1>;
+ };
+ };
};
};
};
--
https://chromeos.dev
More information about the dri-devel
mailing list