[PATCH v2] drm/panel: ili9341: Add comments for registers in ili9341_config()

neil.armstrong at linaro.org neil.armstrong at linaro.org
Tue Aug 20 08:23:26 UTC 2024


On 19/08/2024 19:51, Abhishek Tamboli wrote:
> Add detail comments for registers definitions in struct ili9341_config().
> Replace TODO with comment for each registers.
> 
> Signed-off-by: Abhishek Tamboli <abhishektamboli9 at gmail.com>
> ---
> Changes in v2:
> - Rephrased the commit message.
> 
>   drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
> index 775d5d5e828c..1fbc5d433d75 100644
> --- a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
> +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
> @@ -121,19 +121,19 @@ struct ili9341_config {
>   	const struct drm_display_mode mode;
>   	/* ca: TODO: need comments for this register */
>   	u8 ca[ILI9341_CA_LEN];
> -	/* power_b: TODO: need comments for this register */
> +	/* power_b: Power control B (CFh) */
>   	u8 power_b[ILI9341_POWER_B_LEN];
> -	/* power_seq: TODO: need comments for this register */
> +	/* power_seq: Power on sequence control (EDh) */
>   	u8 power_seq[ILI9341_POWER_SEQ_LEN];
> -	/* dtca: TODO: need comments for this register */
> +	/* dtca: Driver timing control A (E8h) */
>   	u8 dtca[ILI9341_DTCA_LEN];
> -	/* dtcb: TODO: need comments for this register */
> +	/* dtcb: Driver timing control B (EAh) */
>   	u8 dtcb[ILI9341_DTCB_LEN];
> -	/* power_a: TODO: need comments for this register */
> +	/* power_a: Power control A (CBh) */
>   	u8 power_a[ILI9341_POWER_A_LEN];
>   	/* frc: Frame Rate Control (In Normal Mode/Full Colors) (B1h) */
>   	u8 frc[ILI9341_FRC_LEN];
> -	/* prc: TODO: need comments for this register */
> +	/* prc: Pump ratio control (F7h) */
>   	u8 prc;
>   	/* dfc_1: B6h DISCTRL (Display Function Control) */
>   	u8 dfc_1[ILI9341_DFC_1_LEN];
> @@ -147,7 +147,7 @@ struct ili9341_config {
>   	u8 vcom_2;
>   	/* address_mode: Memory Access Control (36h) */
>   	u8 address_mode;
> -	/* g3amma_en: TODO: need comments for this register */
> +	/* g3amma_en: Enable 3G (F2h) */
>   	u8 g3amma_en;
>   	/* rgb_interface: RGB Interface Signal Control (B0h) */
>   	u8 rgb_interface;
> --
> 2.34.1
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>


More information about the dri-devel mailing list