[PATCH v4 0/2] Add Add elan-ekth6a12nay on the basis of elan-ekth6915

[Doug Anderson]

Jiri / Ben,

On Mon, Jul 22, 2024 at 12:31 AM Zhaoxiong Lv
<lvzhaoxiong at huaqin.corp-partner.google.com> wrote:
>
> Elan-ekth6a12nay requires reset to pull down time greater than 10ms,
> so the configuration post_power_delay_ms is 10, and the chipset
> initial time is required to be greater than 300ms, so the
> post_gpio_reset_on_delay_ms is set to 300.
>
> The Elan-ekth6a12nay touch screen chip same as Elan-eKTH6915 controller
> has a reset gpio. The difference is that they have different
> post_power_delay_ms.
>
> Changes between V4 and V3:
> - PATCH 1/2: Combine the 2 const into an enum.
> - PATCH 2/2: No changes.
> - Link to v3: https://lore.kernel.org/all/20240716082851.18173-1-lvzhaoxiong@huaqin.corp-partner.google.com/
>
> Changes between V3 and V2:
> - PATCH 1/2: "ekth6915" isn't a fallback, modify it.
> - PATCH 2/2: No changes.
> - Link to v2: https://lore.kernel.org/all/20240715073159.25064-1-lvzhaoxiong@huaqin.corp-partner.google.com/
>
> Changes between V2 and V1:
> - PATCH 1/2: Respin the series on top of v6.10.
> - PATCH 2/2: No changes.
> - Link to v1: https://lore.kernel.org/all/20240704085555.11204-1-lvzhaoxiong@huaqin.corp-partner.google.com/
>
> Zhaoxiong Lv (2):
>   dt-bindings: HID: i2c-hid: elan: Introduce Elan ekth6a12nay
>   HID: i2c-hid: elan: Add elan-ekth6a12nay timing
>
>  .../devicetree/bindings/input/elan,ekth6915.yaml          | 4 +++-
>  drivers/hid/i2c-hid/i2c-hid-of-elan.c                     | 8 ++++++++
>  2 files changed, 11 insertions(+), 1 deletion(-)

I think this series is ready for you to merge at your leisure. If
there's anything blocking it then please yell. Thanks! :-)

-Doug