[PATCH v3 15/15] drm/i915/gt: Allow the user to change the CCS mode through sysfs
Andi Shyti
andi.shyti at linux.intel.com
Fri Aug 23 13:08:55 UTC 2024
Create the 'ccs_mode' file under
/sys/class/drm/cardX/gt/gt0/ccs_mode
This file allows the user to read and set the current CCS mode.
- Reading: The user can read the current CCS mode, which can be
1, 2, or 4. This value is derived from the current engine
mask.
- Writing: The user can set the CCS mode to 1, 2, or 4,
depending on the desired number of exposed engines and the
required load balancing.
The interface will return -EBUSY if other clients are connected
to i915, or -EINVAL if an invalid value is set.
Signed-off-by: Andi Shyti <andi.shyti at linux.intel.com>
---
drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c | 82 ++++++++++++++++++++-
1 file changed, 80 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c b/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c
index cc46ee9dea3f..1ed6153ff8cf 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt_ccs_mode.c
@@ -6,6 +6,7 @@
#include "i915_drv.h"
#include "intel_engine_user.h"
#include "intel_gt_ccs_mode.h"
+#include "intel_gt_pm.h"
#include "intel_gt_print.h"
#include "intel_gt_regs.h"
#include "intel_gt_sysfs.h"
@@ -172,7 +173,7 @@ static int rb_engine_cmp(struct rb_node *rb_new, const struct rb_node *rb_old)
return new->uabi_class - old->uabi_class;
}
-static void __maybe_unused add_uabi_ccs_engines(struct intel_gt *gt, u32 ccs_mode)
+static void add_uabi_ccs_engines(struct intel_gt *gt, u32 ccs_mode)
{
struct drm_i915_private *i915 = gt->i915;
intel_engine_mask_t new_ccs_mask, tmp;
@@ -230,7 +231,7 @@ static void __maybe_unused add_uabi_ccs_engines(struct intel_gt *gt, u32 ccs_mod
mutex_unlock(&i915->uabi_engines_mutex);
}
-static void __maybe_unused remove_uabi_ccs_engines(struct intel_gt *gt, u8 ccs_mode)
+static void remove_uabi_ccs_engines(struct intel_gt *gt, u8 ccs_mode)
{
struct drm_i915_private *i915 = gt->i915;
intel_engine_mask_t new_ccs_mask, tmp;
@@ -273,8 +274,85 @@ static ssize_t num_cslices_show(struct device *dev,
}
static DEVICE_ATTR_RO(num_cslices);
+static ssize_t ccs_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buff)
+{
+ struct intel_gt *gt = kobj_to_gt(&dev->kobj);
+ u32 ccs_mode;
+
+ ccs_mode = hweight32(gt->ccs.id_mask);
+
+ return sysfs_emit(buff, "%u\n", ccs_mode);
+}
+
+static ssize_t ccs_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buff, size_t count)
+{
+ struct intel_gt *gt = kobj_to_gt(&dev->kobj);
+ int num_cslices = hweight32(CCS_MASK(gt));
+ int ccs_mode = hweight32(gt->ccs.id_mask);
+ ssize_t ret;
+ u32 val;
+
+ ret = kstrtou32(buff, 0, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * As of now possible values to be set are 1, 2, 4,
+ * up to the maximum number of available slices
+ */
+ if (!val || val > num_cslices || (num_cslices % val))
+ return -EINVAL;
+
+ /* Let's wait until the GT is no longer in use */
+ ret = intel_gt_pm_wait_for_idle(gt);
+ if (ret)
+ return ret;
+
+ mutex_lock(>->wakeref.mutex);
+
+ /*
+ * Let's check again that the GT is idle,
+ * we don't want to change the CCS mode
+ * while someone is using the GT
+ */
+ if (intel_gt_pm_is_awake(gt)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /*
+ * Nothing to do if the requested setting
+ * is the same as the current one
+ */
+ if (val == ccs_mode)
+ goto out;
+ else if (val > ccs_mode)
+ add_uabi_ccs_engines(gt, val);
+ else
+ remove_uabi_ccs_engines(gt, val);
+
+out:
+ mutex_unlock(>->wakeref.mutex);
+
+ return ret ?: count;
+}
+static DEVICE_ATTR_RW(ccs_mode);
+
void intel_gt_sysfs_ccs_init(struct intel_gt *gt)
{
if (sysfs_create_file(>->sysfs_gt, &dev_attr_num_cslices.attr))
gt_warn(gt, "Failed to create sysfs num_cslices files\n");
+
+ /*
+ * Do not create the ccs_mode file for non DG2 platforms
+ * because they don't need it as they have only one CCS engine
+ */
+ if (!IS_DG2(gt->i915))
+ return;
+
+ if (sysfs_create_file(>->sysfs_gt, &dev_attr_ccs_mode.attr))
+ gt_warn(gt, "Failed to create sysfs ccs_mode files\n");
}
--
2.45.2
More information about the dri-devel
mailing list