回复: 回复: [PATCH] drm: komeda: Fix an issue related to normalized zpos
Peng Hongchi/彭洪驰
hongchi.peng at siengine.com
Mon Aug 26 02:39:00 UTC 2024
Hi, Liviu,
I'll initialize 'slave_zpos' to zero and resend the [patch v2] soon, thanks!
Best Regards,
Hongchi Peng
-----邮件原件-----
发件人: Liviu Dudau <liviu.dudau at arm.com>
发送时间: 2024年8月24日 20:33
收件人: Peng Hongchi/彭洪驰 <hongchi.peng at siengine.com>
抄送: maarten.lankhorst at linux.intel.com; mripard at kernel.org; tzimmermann at suse.de; airlied at gmail.com; daniel at ffwll.ch; dri-devel at lists.freedesktop.org
主题: Re: 回复: [PATCH] drm: komeda: Fix an issue related to normalized zpos
On Fri, Aug 23, 2024 at 02:53:06AM +0000, Peng Hongchi/彭洪驰 wrote:
> Hi, Liviu,
Hi,
>
> I'm sorry for my carelessness and thanks for your correction, the corrected patch is as follows.
> And we do have an extra patch to set layer_split, but this part of the
> code is owned by my colleague, So that I cannot upload it, sorry about this.
>
> Signed-off-by: hongchi.peng <hongchi.peng at siengine.com>
This cannot be your commit message. If you want to make comments in a patch, I suggest you put them after a three-line dash, like this:
---
Add your comment here
> ---
Keep this marker as it will signal the start of the patch.
> drivers/gpu/drm/arm/display/komeda/komeda_kms.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> index fe46b0ebefea..ab769a0a4afa 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> @@ -160,6 +160,7 @@ static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc,
> struct drm_plane *plane;
> struct list_head zorder_list;
> int order = 0, err;
> + u32 slave_zpos;
Can you please initialise this to zero?
>
> DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n",
> crtc->base.id, crtc->name);
> @@ -199,10 +200,13 @@ static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc,
> plane_st->zpos, plane_st->normalized_zpos);
>
> /* calculate max slave zorder */
> - if (has_bit(drm_plane_index(plane), kcrtc->slave_planes))
> + if (has_bit(drm_plane_index(plane), kcrtc->slave_planes)) {
> + slave_zpos = plane_st->normalized_zpos;
> + if (to_kplane_st(plane_st)->layer_split)
> + slave_zpos++;
> kcrtc_st->max_slave_zorder =
> - max(plane_st->normalized_zpos,
> - kcrtc_st->max_slave_zorder);
> + max(slave_zpos, kcrtc_st->max_slave_zorder);
> + }
> }
>
> crtc_st->zpos_changed = true;
> --
> 2.34.1
>
> Best Regards,
> Hongchi Peng
Also, can you version your patches to help me track them better?
Best regards,
Liviu
>
> -----邮件原件-----
> 发件人: Liviu Dudau <liviu.dudau at arm.com>
> 发送时间: 2024年8月22日 22:05
> 收件人: Peng Hongchi/彭洪驰 <hongchi.peng at siengine.com>
> 抄送: maarten.lankhorst at linux.intel.com; mripard at kernel.org;
> tzimmermann at suse.de; airlied at gmail.com; daniel at ffwll.ch;
> dri-devel at lists.freedesktop.org
> 主题: Re: [PATCH] drm: komeda: Fix an issue related to normalized zpos
>
> Hi Hongchi,
>
> On Wed, Aug 21, 2024 at 04:56:13PM +0800, hongchi.peng wrote:
> > We use komeda_crtc_normalize_zpos to normalize zpos of affected
> > planes to their blending zorder in CU. If there's only one slave
> > plane in affected planes and its layer_split property is enabled,
> > order++ for its split layer, so that when calculating the
> > normalized_zpos of master planes, the split layer of the slave plane
> > is included, but the max_slave_zorder does not include the split
> > layer and keep zero because there's only one slave plane in affacted
> > planes, although we actually use two slave layers in this commit.
> >
> > In most cases, this bug does not result in a commit failure, but
> > assume the following situation:
> > slave_layer 0: zpos = 0, layer split enabled, normalized_zpos =
> > 0;(use slave_layer 2 as its split layer)
> > master_layer 0: zpos = 2, layer_split enabled, normalized_zpos =
> > 2;(use master_layer 2 as its split layer)
> > master_layer 1: zpos = 4, normalized_zpos = 4;
> > master_layer 3: zpos = 5, normalized_zpos = 5;
> > kcrtc_st->max_slave_zorder = 0;
> > When we use master_layer 3 as a input of CU in function
> > komeda_compiz_set_input and check it with function
> > komeda_component_check_input, the parameter idx is equal to
> > normailzed_zpos minus max_slave_zorder, the value of idx is 5 and is
> > euqal to CU's max_active_inputs, so that
> > komeda_component_check_input returns a -EINVAL value.
>
> Yes, indeed, you have found a bug in the calculations when layer_split is set.
> But I was also looking through the code trying to find where layer_split gets set and I could not find it, do you have some extra patches?
>
> >
> > To fix the bug described above, when calculating the
> > max_slave_zorder with the layer_split enabled, count the split layer
> > in this calculation directly.
> >
> > Signed-off-by: hongchi.peng <hongchi.peng at siengine.com>
> > ---
> > drivers/gpu/drm/arm/display/komeda/komeda_kms.c | 11 +++++++----
> > 1 file changed, 7 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> > b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> > index fe46b0ebefea..b3db828284e4 100644
> > --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> > @@ -159,7 +159,7 @@ static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc,
> > struct drm_plane_state *plane_st;
> > struct drm_plane *plane;
> > struct list_head zorder_list;
> > - int order = 0, err;
> > + int order = 0, slave_zpos, err;
>
> Also, the build bot has already flagged it, your patch needs some improvements.
> slave_zpos needs to be u32 if it's going to be compared against max_slave_zorder.
>
> Best regards,
> Liviu
>
> >
> > DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n",
> > crtc->base.id, crtc->name);
> > @@ -199,10 +199,13 @@ static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc,
> > plane_st->zpos, plane_st->normalized_zpos);
> >
> > /* calculate max slave zorder */
> > - if (has_bit(drm_plane_index(plane), kcrtc->slave_planes))
> > + if (has_bit(drm_plane_index(plane), kcrtc->slave_planes)) {
> > + slave_zpos = plane_st->normalized_zpos;
> > + if (to_kplane_st(plane_st)->layer_split)
> > + slave_zpos++;
> > kcrtc_st->max_slave_zorder =
> > - max(plane_st->normalized_zpos,
> > - kcrtc_st->max_slave_zorder);
> > + max(slave_zpos, kcrtc_st->max_slave_zorder);
> > + }
> > }
> >
> > crtc_st->zpos_changed = true;
> > --
> > 2.34.1
> >
>
> --
> ====================
> | I would like to |
> | fix the world, |
> | but they're not |
> | giving me the |
> \ source code! /
> ---------------
> ¯\_(ツ)_/¯
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the dri-devel
mailing list