[PATCH v4 0/4] Add support for RZ/G2UL Display Unit

[Tomi Valkeinen]

Hi,

On 23/08/2024 18:00, Laurent Pinchart wrote:
> Hi Biju,
> 
> On Fri, Aug 23, 2024 at 01:52:14PM +0000, Biju Das wrote:
>> On Friday, August 23, 2024 2:15 PM, Laurent Pinchart wrote:
>>> On Thu, Aug 22, 2024 at 05:23:13PM +0100, Biju Das wrote:
>>>> This patch series aims to add support for RZ/G2UL DU.
>>>>
>>>> The LCD controller is composed of Frame Compression Processor (FCPVD),
>>>> Video Signal Processor (VSPD), and Display Unit (DU).
>>>>
>>>> The output of LCDC is connected display parallel interface (DPI) and
>>>> supports a maximum resolution of WXGA along with 2 RPFs to support the
>>>> blending of two picture layers and raster operations (ROPs)
>>>>
>>>> It is similar to LCDC IP on RZ/G2L SoCs, but does not have DSI interface.
>>>>
>>>> v3->v4:
>>>>   * Restored the ports property for RZ/G2UL and described port at 0 for the
>>>>     DPI interface in bindings patch.
>>>>   * Restored tags from Geert and Conor as the change is trivial
>>>>     (Replaced port 1->0 from v2).
>>>>   * Used "&" instead of "==" in rzg2l_du_start_stop() for scalability.
>>>>   * Restored port variable in struct rzg2l_du_output_routing
>>>>   * Updated rzg2l_du_encoders_init() to handle port based on hardware indices.
>>>>   * Restored ports property in du node and used port at 0 for connected
>>>>     DPI interface.
>>>> v2->v3:
>>>>   * Split patch series based on subsystem from DU patch series [1].
>>>>   * Replaced ports->port property for RZ/G2UL as it supports only DPI
>>>>     and retained ports property for RZ/{G2L,V2L} as it supports both DSI
>>>>     and DPI output interface.
>>>>   * Added missing blank line before example.
>>>>   * Dropped tags from Conor and Geert as there are new changes in bindings
>>>>   * Avoided the line break in rzg2l_du_start_stop() for rstate.
>>>>   * Replaced port->du_output in  struct rzg2l_du_output_routing and
>>>>     dropped using the port number to indicate the output type in
>>>>     rzg2l_du_encoders_init().
>>>>   * Updated rzg2l_du_r9a07g043u_info and rzg2l_du_r9a07g044_info.
>>>>
>>>>   [1] https://lore.kernel.org/all/20240709135152.185042-1-biju.das.jz@bp.renesas.com/
>>>> v1->v2:
>>>>   * Updated cover letter header "DU IP->Display Unit".
>>>>   * Updated commit description related to non ABI breakage for patch#3.
>>>>   * Added Ack from Conor for binding patches.
>>>>
>>>> Biju Das (4):
>>>>    dt-bindings: display: renesas,rzg2l-du: Document RZ/G2UL DU bindings
>>>>    drm: renesas: rz-du: Add RZ/G2UL DU Support
>>>
>>> The first two patches look good to me. Do you have access to drm-misc, will you push them yourself, or
>>> do you expect a maintainer to pick them up ?
>>
>> I don’t have access to drm-misc. I expect a maintainer to pick it up(Maybe via rcar-du tree or
>> drm-misc tree), or else if it is ok, what is the procedure to get access for drm-misc tree??
> 
> You can find instructions to request drm-misc commit access at
> https://drm.pages.freedesktop.org/maintainer-tools/committer/commit-access.html
> 
> Tomi, to avoid delays, could you push the first two patches to drm-misc
> ?

I have pushed the first two patches.

  Tomi