[PATCH] drm/panel: novatek-nt35950: transition to mipi_dsi wrapped functions
Doug Anderson
dianders at chromium.org
Tue Aug 27 19:26:26 UTC 2024
Hi,
On Sat, Aug 24, 2024 at 1:44 AM Tejas Vipin <tejasvipin76 at gmail.com> wrote:
>
> +static void nt35950_set_cmd2_page(struct mipi_dsi_multi_context *dsi_ctx,
> + struct nt35950 *nt, u8 page)
> {
> const u8 mauc_cmd2_page[] = { MCS_CMD_MAUCCTR, 0x55, 0xaa, 0x52,
> 0x08, page };
> - int ret;
>
> - ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], mauc_cmd2_page,
> + mipi_dsi_dcs_write_buffer_multi(dsi_ctx, mauc_cmd2_page,
> ARRAY_SIZE(mauc_cmd2_page));
> - if (ret < 0)
> - return ret;
> + if (dsi_ctx->accum_err)
> + return;
>
> nt->last_page = page;
> - return 0;
nit: It's a style choice, but I personally would have changed the above to just:
if (!dsi_ctx->accum_err)
nt->last_page = page;
> @@ -284,109 +258,68 @@ static int nt35950_on(struct nt35950 *nt)
> {
> const struct nt35950_panel_mode *mode_data = nt->desc->mode_data;
> struct mipi_dsi_device *dsi = nt->dsi[0];
> - struct device *dev = &dsi->dev;
> - int ret;
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>
> nt->cur_mode = nt35950_get_current_mode(nt);
> nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
> nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
>
> - ret = nt35950_set_cmd2_page(nt, 0);
> - if (ret < 0)
> - return ret;
> -
> - ret = nt35950_set_data_compression(nt, mode_data[nt->cur_mode].compression);
> - if (ret < 0)
> - return ret;
> -
> - ret = nt35950_set_scale_mode(nt, mode_data[nt->cur_mode].scaler_mode);
> - if (ret < 0)
> - return ret;
> -
> - ret = nt35950_set_scaler(nt, mode_data[nt->cur_mode].scaler_on);
> - if (ret < 0)
> - return ret;
> + nt35950_set_cmd2_page(&dsi_ctx, nt, 0);
> + nt35950_set_data_compression(&dsi_ctx, nt, mode_data[nt->cur_mode].compression);
> + nt35950_set_scale_mode(&dsi_ctx, mode_data[nt->cur_mode].scaler_mode);
> + nt35950_set_scaler(&dsi_ctx, mode_data[nt->cur_mode].scaler_on);
> + nt35950_set_dispout(&dsi_ctx, nt);
>
> - ret = nt35950_set_dispout(nt);
> - if (ret < 0)
> - return ret;
> -
> - ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> - if (ret < 0) {
> - dev_err(dev, "Failed to set tear on: %d\n", ret);
> - return ret;
> - }
> -
> - ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0);
> - if (ret < 0) {
> - dev_err(dev, "Failed to set tear scanline: %d\n", ret);
> - return ret;
> - }
> + mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + mipi_dsi_dcs_set_tear_scanline_multi(&dsi_ctx, 0);
>
> /* CMD2 Page 1 */
> - ret = nt35950_set_cmd2_page(nt, 1);
> - if (ret < 0)
> - return ret;
> + nt35950_set_cmd2_page(&dsi_ctx, nt, 1);
>
> /* Unknown command */
> - mipi_dsi_dcs_write_seq(dsi, 0xd4, 0x88, 0x88);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xd4, 0x88, 0x88);
>
> /* CMD2 Page 7 */
> - ret = nt35950_set_cmd2_page(nt, 7);
> - if (ret < 0)
> - return ret;
> + nt35950_set_cmd2_page(&dsi_ctx, nt, 7);
>
> /* Enable SubPixel Rendering */
> - mipi_dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_EN, 0x01);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PARAM_SPR_EN, 0x01);
>
> /* SPR Mode: YYG Rainbow-RGB */
> - mipi_dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_MODE, MCS_SPR_MODE_YYG_RAINBOW_RGB);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PARAM_SPR_MODE,
> + MCS_SPR_MODE_YYG_RAINBOW_RGB);
>
> /* CMD3 */
> - ret = nt35950_inject_black_image(nt);
> - if (ret < 0)
> - return ret;
> + nt35950_inject_black_image(&dsi_ctx);
> + mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, 120);
>
> - ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> - if (ret < 0)
> - return ret;
> - msleep(120);
> -
> - ret = mipi_dsi_dcs_set_display_on(dsi);
> - if (ret < 0)
> - return ret;
> - msleep(120);
> + mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, 120);
>
> nt->dsi[0]->mode_flags &= ~MIPI_DSI_MODE_LPM;
> nt->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
>
> - return 0;
> + return dsi_ctx.accum_err;
I think you only want to clear "MIPI_DSI_MODE_LPM" if there was no
error, right? That matches the old code. So you'd want:
if (dsi_ctx.accum_err)
return dsi_ctx.accum_err;
nt->dsi[0]->mode_flags &= ~MIPI_DSI_MODE_LPM;
nt->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
return 0;
> static int nt35950_off(struct nt35950 *nt)
> {
> - struct device *dev = &nt->dsi[0]->dev;
> - int ret;
> + struct mipi_dsi_device *dsi = nt->dsi[0];
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>
> - ret = mipi_dsi_dcs_set_display_off(nt->dsi[0]);
> - if (ret < 0) {
> - dev_err(dev, "Failed to set display off: %d\n", ret);
> - goto set_lpm;
> - }
> - usleep_range(10000, 11000);
> + mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
> + mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);
>
> - ret = mipi_dsi_dcs_enter_sleep_mode(nt->dsi[0]);
> - if (ret < 0) {
> - dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> - goto set_lpm;
> - }
> - msleep(150);
> + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, 150);
>
> -set_lpm:
> - nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
> - nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
> + if (dsi_ctx.accum_err) {
> + nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
> + nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
> + }
I'm pretty sure you want to set MIPI_DSI_MODE_LPM _unconditionally,
right? The old code would set it in both error and non-error cases I
think.
> @@ -452,10 +384,8 @@ static int nt35950_prepare(struct drm_panel *panel)
> nt35950_reset(nt);
>
> ret = nt35950_on(nt);
> - if (ret < 0) {
> - dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + if (ret < 0)
> goto end;
> - }
I'd just get rid of the "if" test since "end" is next anyway. Given
that there's no error message it seems silly to have the "if" test
now.
> @@ -469,12 +399,8 @@ static int nt35950_prepare(struct drm_panel *panel)
> static int nt35950_unprepare(struct drm_panel *panel)
> {
> struct nt35950 *nt = to_nt35950(panel);
> - struct device *dev = &nt->dsi[0]->dev;
> - int ret;
>
> - ret = nt35950_off(nt);
> - if (ret < 0)
> - dev_err(dev, "Failed to deinitialize panel: %d\n", ret);
> + nt35950_off(nt);
This is the only caller of nt35950_off() and you no longer check the
return code, so you can just make nt35950_off() void, right?
More information about the dri-devel
mailing list