[PATCH] amdgpu: disable amdgpu_dpm on THTF-SW831-1W-DS25_MB board

Alex Deucher alexdeucher at gmail.com
Wed Aug 28 15:30:20 UTC 2024


On Wed, Aug 28, 2024 at 7:28 AM WangYuli <wangyuli at uniontech.com> wrote:
>
> From: wenlunpeng <wenlunpeng at uniontech.com>
>
> The quirk is for reboot-stability.
>
> A device reboot stress test has been observed to cause
> random system hangs when amdgpu_dpm is enabled.
>
> Disabling amdgpu_dpm can fix this.
>
> However, a boot-param can still overwrite it to enable
> amdgpu_dpm.
>
> Serial log when error occurs:
> ...
> Console: switching to colour frame buffer device 160x45
> amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
> [drm:amdgpu_device_ip_late_init] *ERROR* late_init of IP block <si_dpm> failed -22
> amdgpu 0000:01:00.0: amdgpu_device_ip_late_init failed
> amdgpu 0000:01:00.0: Fatal error during GPU init
> [drm] amdgpu: finishing device.
> Console: switching to colour dummy device 80x25
> ...
>
> Signed-off-by: wenlunpeng <wenlunpeng at uniontech.com>
> Signed-off-by: WangYuli <wangyuli at uniontech.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 094498a0964b..81716fcac7cd 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -32,6 +32,7 @@
>  #include <drm/drm_vblank.h>
>
>  #include <linux/cc_platform.h>
> +#include <linux/dmi.h>
>  #include <linux/dynamic_debug.h>
>  #include <linux/module.h>
>  #include <linux/mmu_notifier.h>
> @@ -3023,10 +3024,32 @@ static struct pci_driver amdgpu_kms_pci_driver = {
>         .dev_groups = amdgpu_sysfs_groups,
>  };
>
> +static int quirk_set_amdgpu_dpm_0(const struct dmi_system_id *dmi)
> +{
> +       amdgpu_dpm = 0;

This will disable dpm on all devices that you might install on this
platform.  If this is specific to a particular platform and board
combination, it might be better to check the platform in the
dpm_init() code for the specific chip that is problematic.
Additionally, disabling dpm will result in boot clocks which means
performance will be very low.

Alex

> +       pr_info("Identified '%s', set amdgpu_dpm to 0.\n", dmi->ident);
> +       return 1;
> +}
> +
> +static const struct dmi_system_id amdgpu_quirklist[] = {
> +       {
> +               .ident = "DS25 Desktop",
> +               .matches = {
> +                       DMI_MATCH(DMI_BOARD_NAME, "THTF-SW831-1W-DS25_MB"),
> +               },
> +               .callback = quirk_set_amdgpu_dpm_0,
> +       },
> +       {}
> +};
> +
>  static int __init amdgpu_init(void)
>  {
>         int r;
>
> +       /* quirks for some hardware, applied only when it's untouched */
> +       if (amdgpu_dpm == -1)
> +               dmi_check_system(amdgpu_quirklist);
> +
>         if (drm_firmware_drivers_only())
>                 return -EINVAL;
>
> --
> 2.43.4
>


More information about the dri-devel mailing list