[PATCH v5 08/12] drm/msm/dpu: split dpu_plane_atomic_check()
Abhinav Kumar
quic_abhinavk at quicinc.com
Wed Aug 28 18:27:52 UTC 2024
On 6/26/2024 2:46 PM, Dmitry Baryshkov wrote:
> Split dpu_plane_atomic_check() function into two pieces:
>
> dpu_plane_atomic_check_nopipe() performing generic checks on the pstate,
> without touching the associated pipe,
>
> and
>
> dpu_plane_atomic_check_pipes(), which takes into account used pipes.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 178 +++++++++++++++++++-----------
> 1 file changed, 112 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index 115c1bd77bdd..9b9fe28052ad 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -788,49 +788,22 @@ static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
> #define MAX_UPSCALE_RATIO 20
> #define MAX_DOWNSCALE_RATIO 4
>
> -static int dpu_plane_atomic_check(struct drm_plane *plane,
> - struct drm_atomic_state *state)
> +static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
> + struct drm_plane_state *new_plane_state,
> + const struct drm_crtc_state *crtc_state)
> {
> - struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
> - plane);
> int ret = 0, min_scale, max_scale;
> struct dpu_plane *pdpu = to_dpu_plane(plane);
> struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
> u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
> struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
> - struct dpu_sw_pipe *pipe = &pstate->pipe;
> - struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
> - const struct drm_crtc_state *crtc_state = NULL;
> - const struct msm_format *fmt;
> struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
> struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
> struct drm_rect fb_rect = { 0 };
> uint32_t max_linewidth;
> - unsigned int rotation;
> - uint32_t supported_rotations;
> - const struct dpu_sspp_cfg *pipe_hw_caps;
> - const struct dpu_sspp_sub_blks *sblk;
> -
> - if (new_plane_state->crtc)
> - crtc_state = drm_atomic_get_new_crtc_state(state,
> - new_plane_state->crtc);
> -
> - pipe->sspp = dpu_rm_get_sspp(&kms->rm, pdpu->pipe);
> - r_pipe->sspp = NULL;
>
> - if (!pipe->sspp)
> - return -EINVAL;
> -
> - pipe_hw_caps = pipe->sspp->cap;
> - sblk = pipe->sspp->cap->sblk;
> -
> - if (sblk->scaler_blk.len) {
> - min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
> - max_scale = MAX_DOWNSCALE_RATIO << 16;
> - } else {
> - min_scale = DRM_PLANE_NO_SCALING;
> - max_scale = DRM_PLANE_NO_SCALING;
> - }
> + min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
> + max_scale = MAX_DOWNSCALE_RATIO << 16;
>
> ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
> min_scale,
> @@ -843,11 +816,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> if (!new_plane_state->visible)
> return 0;
>
> - pipe->multirect_index = DPU_SSPP_RECT_SOLO;
> - pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
> - r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
> - r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
> -
> pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
> if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
> DPU_ERROR("> %d plane stages assigned\n",
> @@ -871,8 +839,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> return -E2BIG;
> }
>
> - fmt = msm_framebuffer_format(new_plane_state->fb);
> -
> max_linewidth = pdpu->catalog->caps->max_linewidth;
>
> drm_rect_rotate(&pipe_cfg->src_rect,
> @@ -881,6 +847,78 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>
> if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
> _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
> + if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
> + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> + return -E2BIG;
> + }
> +
> + *r_pipe_cfg = *pipe_cfg;
> + pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
> + pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
> + r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
> + r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
> + } else {
> + memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
> + }
> +
This is the part I am not able to fully understand. Assignment of
r_pipe_cfg is also pipe related so why should that move to
dpu_plane_atomic_check_nopipe(). It should be part of
dpu_plane_atomic_check_pipe().
> + drm_rect_rotate_inv(&pipe_cfg->src_rect,
> + new_plane_state->fb->width, new_plane_state->fb->height,
> + new_plane_state->rotation);
> + if (r_pipe_cfg->src_rect.x1 != 0)
> + drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
> + new_plane_state->fb->width, new_plane_state->fb->height,
> + new_plane_state->rotation);
> +
> + pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
> +
> + return 0;
> +}
> +
> +static int dpu_plane_atomic_check_pipes(struct drm_plane *plane,
> + struct drm_atomic_state *state,
> + const struct drm_crtc_state *crtc_state)
> +{
> + struct drm_plane_state *new_plane_state =
> + drm_atomic_get_new_plane_state(state, plane);
> + struct dpu_plane *pdpu = to_dpu_plane(plane);
> + struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
> + struct dpu_sw_pipe *pipe = &pstate->pipe;
> + struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
> + const struct msm_format *fmt;
> + struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
> + struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
> + uint32_t max_linewidth;
> + unsigned int rotation;
> + uint32_t supported_rotations;
> + const struct dpu_sspp_cfg *pipe_hw_caps;
> + const struct dpu_sspp_sub_blks *sblk;
> + int ret = 0;
> +
> + pipe_hw_caps = pipe->sspp->cap;
> + sblk = pipe->sspp->cap->sblk;
> +
> + /*
> + * We already have verified scaling against platform limitations.
> + * Now check if the SSPP supports scaling at all.
> + */
> + if (!sblk->scaler_blk.len &&
> + ((drm_rect_width(&new_plane_state->src) >> 16 !=
> + drm_rect_width(&new_plane_state->dst)) ||
> + (drm_rect_height(&new_plane_state->src) >> 16 !=
> + drm_rect_height(&new_plane_state->dst))))
> + return -ERANGE;
> +
Should this part be retained under dpu_plane_atomic_check_nopipe()?
This is also not pipe dependent.
> + fmt = msm_framebuffer_format(new_plane_state->fb);
> +
> + max_linewidth = pdpu->catalog->caps->max_linewidth;
> +
> + ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt,
> + &crtc_state->adjusted_mode);
> + if (ret)
> + return ret;
> +
> + if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
> /*
> * In parallel multirect case only the half of the usual width
> * is supported for tiled formats. If we are here, we know that
> @@ -894,12 +932,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> return -E2BIG;
> }
>
> - if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
> - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> - return -E2BIG;
> - }
> -
> if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
> drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
> (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
> @@ -921,26 +953,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> r_pipe->multirect_index = DPU_SSPP_RECT_1;
> r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
>
> - *r_pipe_cfg = *pipe_cfg;
> - pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
> - pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
> - r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
> - r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
> - }
> -
> - drm_rect_rotate_inv(&pipe_cfg->src_rect,
> - new_plane_state->fb->width, new_plane_state->fb->height,
> - new_plane_state->rotation);
> - if (r_pipe->sspp)
> - drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
> - new_plane_state->fb->width, new_plane_state->fb->height,
> - new_plane_state->rotation);
> -
> - ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt, &crtc_state->adjusted_mode);
> - if (ret)
> - return ret;
> -
> - if (r_pipe->sspp) {
> ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
> &crtc_state->adjusted_mode);
> if (ret)
> @@ -963,11 +975,45 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> }
>
> pstate->rotation = rotation;
The dpu_plane_check_inline_rotation() is also pipe independent. So even
that goes to dpu_plane_atomic_check_nopipe()?
> - pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
>
> return 0;
> }
>
<snip>
More information about the dri-devel
mailing list