[PATCH 13/21] drm/msm/dpu: Support quad pipe in header files
Jun Nie
jun.nie at linaro.org
Thu Aug 29 10:17:42 UTC 2024
Support 4 pipes and their configs at most. They are for 2 SSPP
and their multi-rect mode. Because one SSPP can co-work with
2 mixer at most, 2 pair of mixer are needed for 2 SSPP in quad-
pipe case. So 2 mixer configs are needed in quad-pipe case.
Signed-off-by: Jun Nie <jun.nie at linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 2 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h | 11 ++++++++++-
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 30 +++++++++++++++++++++--------
3 files changed, 33 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index a2eff36a2224c..424725303ccad 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -32,7 +32,7 @@
#define DPU_MAX_PLANES 4
#endif
-#define PIPES_PER_STAGE 2
+#define PIPES_PER_STAGE 4
#ifndef DPU_MAX_DE_CURVES
#define DPU_MAX_DE_CURVES 3
#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
index fc54625ae5d4f..ae6beff2c294b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
@@ -143,11 +143,20 @@ struct dpu_hw_pixel_ext {
* such as decimation, flip etc to program this field
* @dest_rect: destination ROI.
* @rotation: simplified drm rotation hint
+ * @visible: mark this cfg is valid
+ * @mxcfg_id: mixer config ID for left or right half screen.
+ * We have single SSPP, dual SSPP, single SSPP+multi_rect or dual
+ * SSPP+multi_rect case. mxcfg_id mark current pipe will use
+ * which mixer cfg. The first mxcfg is for the left half of screen,
+ * the 2nd mxcfg is for the right half screen. The heading cfg may
+ * be skipped by pipe with the first mxcfg_id = 1 if the plane is
+ * only displayed in the right side, thus SSPP goes to later mixers.
*/
struct dpu_sw_pipe_cfg {
struct drm_rect src_rect;
struct drm_rect dst_rect;
- unsigned int rotation;
+ unsigned int rotation, mxcfg_id;
+ bool visible;
};
/**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index e225d5baceb09..9e79cf9eba264 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -14,14 +14,30 @@
#include "dpu_hw_mdss.h"
#include "dpu_hw_sspp.h"
+/**
+ * Max number of mixer configs. Because we support 4 pipes at most,
+ * the 4 pipes are with 2 SSPP and their multi-rect mode. While one
+ * SSPP can co-work with 2 mixer at most, then 2 pair of mixer are
+ * needed for 2 SSPP in quad-pipe case. Thus 2 mixer configs are
+ * needed in quad-pipe case.
+ */
+#define MIX_CFGS_IN_CRTC 2
+
/**
* struct dpu_plane_state: Define dpu extension of drm plane state object
* @base: base drm plane state object
* @aspace: pointer to address space for input/output buffers
- * @pipe: software pipe description
- * @r_pipe: software pipe description of the second pipe
- * @pipe_cfg: software pipe configuration
- * @r_pipe_cfg: software pipe configuration for the second pipe
+ * @pipe: software pipe description. Some or all of fields in array can
+ * be in use per topology. The heading fields are used first,
+ * and the later fields is invalid if visible field of pipe_cfg
+ * is not set. For example, the visible fields of pipe_cfg are set
+ * in the first 2 pipe_cfg fields, and the mxcfg_id for them are
+ * 0 and 1. That means the first pipe is for left half screen and
+ * the 2nd pipe is for right half. The visible field of the 3rd
+ * pipe_cfg is not set, which means the 3rd and 4th pipe are not
+ * in use.
+ * @pipe_cfg: software pipe configuration. The 4 fields are for SSPP and their
+ parallel rect as above pipes.
* @stage: assigned by crtc blender
* @needs_qos_remap: qos remap settings need to be updated
* @multirect_index: index of the rectangle of SSPP
@@ -34,10 +50,8 @@
struct dpu_plane_state {
struct drm_plane_state base;
struct msm_gem_address_space *aspace;
- struct dpu_sw_pipe pipe;
- struct dpu_sw_pipe r_pipe;
- struct dpu_sw_pipe_cfg pipe_cfg;
- struct dpu_sw_pipe_cfg r_pipe_cfg;
+ struct dpu_sw_pipe pipe[PIPES_PER_STAGE];
+ struct dpu_sw_pipe_cfg pipe_cfg[PIPES_PER_STAGE];
enum dpu_stage stage;
bool needs_qos_remap;
bool pending;
--
2.34.1
More information about the dri-devel
mailing list