[PATCH 17/21] drm/msm/dpu: Adjust writeback phys encoder setup for CWB
Jessica Zhang
quic_jesszhan at quicinc.com
Thu Aug 29 20:48:38 UTC 2024
Adjust QoS remapper, OT limit, and CDP parameters to account for
concurrent writeback
Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
index 6d93e6ae442d..56b5e44132da 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
@@ -68,7 +68,7 @@ static void dpu_encoder_phys_wb_set_ot_limit(
ot_params.num = hw_wb->idx - WB_0;
ot_params.width = phys_enc->cached_mode.hdisplay;
ot_params.height = phys_enc->cached_mode.vdisplay;
- ot_params.is_wfd = true;
+ ot_params.is_wfd = !dpu_encoder_in_clone_mode(phys_enc->parent);
ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode);
ot_params.vbif_idx = hw_wb->caps->vbif_idx;
ot_params.rd = false;
@@ -111,7 +111,7 @@ static void dpu_encoder_phys_wb_set_qos_remap(
qos_params.vbif_idx = hw_wb->caps->vbif_idx;
qos_params.xin_id = hw_wb->caps->xin_id;
qos_params.num = hw_wb->idx - WB_0;
- qos_params.is_rt = false;
+ qos_params.is_rt = dpu_encoder_in_clone_mode(phys_enc->parent);
DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n",
qos_params.num,
@@ -174,6 +174,7 @@ static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc,
struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
struct dpu_hw_wb *hw_wb;
struct dpu_hw_wb_cfg *wb_cfg;
+ u32 cdp_usage;
if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog) {
DPU_ERROR("invalid encoder\n");
@@ -182,6 +183,10 @@ static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc,
hw_wb = phys_enc->hw_wb;
wb_cfg = &wb_enc->wb_cfg;
+ if (dpu_encoder_in_clone_mode(phys_enc->parent))
+ cdp_usage = DPU_PERF_CDP_USAGE_RT;
+ else
+ cdp_usage = DPU_PERF_CDP_USAGE_NRT;
wb_cfg->intf_mode = phys_enc->intf_mode;
wb_cfg->roi.x1 = 0;
@@ -199,7 +204,7 @@ static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc,
const struct dpu_perf_cfg *perf = phys_enc->dpu_kms->catalog->perf;
hw_wb->ops.setup_cdp(hw_wb, wb_cfg->dest.format,
- perf->cdp_cfg[DPU_PERF_CDP_USAGE_NRT].wr_enable);
+ perf->cdp_cfg[cdp_usage].wr_enable);
}
if (hw_wb->ops.setup_outaddress)
--
2.34.1
More information about the dri-devel
mailing list