[PATCH v1 7/7] drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188

[CK Hu (胡俊光)]

Hi, Angelo:

On Wed, 2024-11-20 at 13:45 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until you have verified the sender or the content.
> 
> 
> Add support for the newer HDMI-TX (Encoder) v2 and DDC v2 IPs
> found in MediaTek's MT8195, MT8188 SoC and their variants, and
> including support for display modes up to 4k60 and for HDMI
> Audio, as per the HDMI 2.0 spec.
> 
> HDCP and CEC functionalities are also supported by this hardware,
> but are not included in this commit.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---

[snip]

> +static void mtk_hdmi_v2_bridge_enable(struct drm_bridge *bridge,
> +                                     struct drm_bridge_state *old_state)
> +{
> +       struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
> +       u8 buffer_spd[MTK_HDMI_V2_SPD_BUFFER_SIZE];
> +       u8 buffer_avi[HDMI_INFOFRAME_SIZE(AVI)];
> +
> +       mtk_hdmi_send_infoframe(hdmi, buffer_spd, sizeof(buffer_spd),
> +                               buffer_avi, sizeof(buffer_avi), &hdmi->mode);
> +       mtk_hdmi_hw_spd_infoframe(hdmi, buffer_spd, sizeof(buffer_spd));
> +       mtk_hdmi_hw_avi_infoframe(hdmi, buffer_avi, sizeof(buffer_avi));
> +
> +       mtk_hdmi_hw_vid_mute(hdmi, false);
> +       mtk_hdmi_hw_aud_mute(hdmi, false);

In v1, it does not unmute when bridge enable.
I would like v1 and v2 has the same behavior.
If possible, remove these code.
If remove thee code would result in some problem,
add comment to describe why need these code.

Regards,
CK

> +
> +       /* signal the connect event to audio codec */
> +       mtk_hdmi_handle_plugged_change(hdmi, true);
> +
> +       hdmi->enabled = true;
> +}
> +
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20241203/454ac485/attachment-0001.htm>