[PATCH 8/9] arm64: dts: renesas: r8a779h0: Add display support

[Tomi Valkeinen]

Hi,

On 03/12/2024 11:37, Laurent Pinchart wrote:
> Hi Tomi,
> 
> Thank you for the patch.
> 
> On Tue, Dec 03, 2024 at 10:01:42AM +0200, Tomi Valkeinen wrote:
>> From: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
>>
>> Add the device nodes for supporting DU and DSI.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
>> ---
>>   arch/arm64/boot/dts/renesas/r8a779h0.dtsi | 77 +++++++++++++++++++++++++++++++
>>   1 file changed, 77 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
>> index 12d8be3fd579..82df6ee98afb 100644
>> --- a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
>> +++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
>> @@ -1828,6 +1828,54 @@ csi41isp1: endpoint {
>>   			};
>>   		};
>>   
>> +		fcpvd0: fcp at fea10000 {
>> +			compatible = "renesas,fcpv";
>> +			reg = <0 0xfea10000 0 0x200>;
>> +			clocks = <&cpg CPG_MOD 508>;
>> +			power-domains = <&sysc R8A779H0_PD_C4>;
>> +			resets = <&cpg 508>;
>> +		};
>> +
>> +		vspd0: vsp at fea20000 {
>> +			compatible = "renesas,vsp2";
>> +			reg = <0 0xfea20000 0 0x8000>;
>> +			interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>;
> 
> The documentation lists this interrupt as being LevelSensitive and
> Negative. I wouldn't expect the VSP to work at all with a wrong polarity
> in DT, so the level may get inverted somewhere.

Indeed... It's the same for V4H. And it also has IRQ_TYPE_LEVEL_HIGH in 
the dts. I tried changing it to LOW on V4H, but:

genirq: Setting trigger mode 8 for irq 91 failed
vsp1 fea20000.vsp: failed to request IRQ

I didn't dig further yet.

>> +			clocks = <&cpg CPG_MOD 830>;
>> +			power-domains = <&sysc R8A779H0_PD_C4>;
>> +			resets = <&cpg 830>;
>> +			renesas,fcp = <&fcpvd0>;
>> +		};
>> +
>> +		du: display at feb00000 {
>> +			compatible = "renesas,du-r8a779h0";
>> +			reg = <0 0xfeb00000 0 0x40000>;
>> +			interrupts = <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&cpg CPG_MOD 411>;
>> +			clock-names = "du.0";
>> +			power-domains = <&sysc R8A779H0_PD_C4>;
>> +			resets = <&cpg 411>;
>> +			reset-names = "du.0";
>> +			renesas,vsps = <&vspd0 0>;
>> +
>> +			status = "disabled";
>> +
>> +			ports {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +
>> +				port at 0 {
>> +					reg = <0>;
>> +					du_out_dsi0: endpoint {
>> +						remote-endpoint = <&dsi0_in>;
>> +					};
>> +				};
>> +
>> +				port at 1 {
>> +					reg = <1>;
>> +				};
> 
> On V4M the DU has a single channel, so there should be a single port.

Yep, I'll drop.

  Tomi

> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> 
>> +			};
>> +		};
>> +
>>   		isp0: isp at fed00000 {
>>   			compatible = "renesas,r8a779h0-isp",
>>   				     "renesas,rcar-gen4-isp";
>> @@ -1996,6 +2044,35 @@ isp1vin15: endpoint {
>>   			};
>>   		};
>>   
>> +		dsi0: dsi-encoder at fed80000 {
>> +			compatible = "renesas,r8a779h0-dsi-csi2-tx";
>> +			reg = <0 0xfed80000 0 0x10000>;
>> +			clocks = <&cpg CPG_MOD 415>,
>> +				 <&cpg CPG_CORE R8A779H0_CLK_DSIEXT>,
>> +				 <&cpg CPG_CORE R8A779H0_CLK_DSIREF>;
>> +			clock-names = "fck", "dsi", "pll";
>> +			power-domains = <&sysc R8A779H0_PD_C4>;
>> +			resets = <&cpg 415>;
>> +
>> +			status = "disabled";
>> +
>> +			ports {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +
>> +				port at 0 {
>> +					reg = <0>;
>> +					dsi0_in: endpoint {
>> +						remote-endpoint = <&du_out_dsi0>;
>> +					};
>> +				};
>> +
>> +				port at 1 {
>> +					reg = <1>;
>> +				};
>> +			};
>> +		};
>> +
>>   		prr: chipid at fff00044 {
>>   			compatible = "renesas,prr";
>>   			reg = <0 0xfff00044 0 4>;
>