[PATCH] drm/bridge: ite-it6263: Support VESA input format

[Dmitry Baryshkov]

On Thu, 5 Dec 2024 at 11:01, Liu Ying <victor.liu at nxp.com> wrote:
>
> On 12/04/2024, Biju Das wrote:
> > Hi Liu Ying,
>
> Hi Biju,
>
> >
> >> -----Original Message-----
> >> From: Liu Ying <victor.liu at nxp.com>
> >> Sent: 04 December 2024 03:43
> >> Subject: Re: [PATCH] drm/bridge: ite-it6263: Support VESA input format
> >>
> >> On 12/04/2024, Dmitry Baryshkov wrote:
> >>> On Tue, Dec 03, 2024 at 06:21:29PM +0100, tomm.merciai at gmail.com wrote:
> >>>> From: Tommaso Merciai <tommaso.merciai.xr at bp.renesas.com>
> >>>>
> >>>> Introduce it6263_is_input_bus_fmt_valid() and refactor the
> >>>> it6263_bridge_atomic_get_input_bus_fmts() function to support VESA
> >>>> format by selecting the LVDS input format based on the LVDS data
> >>>> mapping and thereby support both JEIDA and VESA input formats.
> >>>
> >>> For the patch itself,
> >>>
> >>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> >>>
> >>> A more generic question: is the bridge limited to 4 lanes or does it
> >>> support 3-lane or 5-lane configurations?
> >>
> >> According to ite,it6263.yaml, the bridge supports all the data mappings(jeida-{18,24,30} and vesa-
> >> {24,30}) listed in lvds-data-mapping.yaml.  lvds-data-mapping.yaml specifies the data lanes(3/4/5)
> >> used by each of the data mappings.  So, the bridge supports 3, 4 or 5 data lanes.
> >
> > In Renesas SMARC RZ/G3E LVDS add on board, only 4 LVDS Rx lanes connected. The 5th one is unconnected.
> > What is the situation in your board Liu Ying?
>
> The adapter cards I'm using to connect with i.MX8MP EVK have only 4
> LVDS data lanes routed out.

What about the bridge SoC. I don't understand why the driver gets
limited by a particular add-on card.

-- 
With best wishes
Dmitry