[PATCH v3 02/10] drm/rcar-du: Write DPTSR only if the second source exists
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Dec 9 23:23:08 UTC 2024
On Tue, Dec 10, 2024 at 01:04:19AM +0200, Laurent Pinchart wrote:
> On Fri, Dec 06, 2024 at 11:32:35AM +0200, Tomi Valkeinen wrote:
> > From: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
> >
> > Currently the driver always writes DPTSR when setting up the hardware.
> > However, writing the register is only meaningful when the second source
> > for a plane is used, and the register is not even documented for SoCs
> > that do not have the second source.
>
> I've confirmed that for all the models currently supported by the DU
> driver.
>
> > So move the write behind a condition.
> >
> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
>
> I will test the series on an M3N board.
Tested-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com> # On R-Car M3-N
> > ---
> > drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c | 20 +++++++++++++++-----
> > 1 file changed, 15 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
> > index 2ccd2581f544..1ec806c8e013 100644
> > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
> > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
> > @@ -185,11 +185,21 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
> > dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1;
> > rcar_du_group_write(rgrp, DORCR, dorcr);
> >
> > - /* Apply planes to CRTCs association. */
> > - mutex_lock(&rgrp->lock);
> > - rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
> > - rgrp->dptsr_planes);
> > - mutex_unlock(&rgrp->lock);
> > + /*
> > + * DPTSR is used to select the source for the planes of a group. The
> > + * first source is chosen by writing 0 to the respective bits, and this
> > + * is always the default value of the register. In other words, writing
> > + * DPTSR is only needed if the SoC supports choosing the second source.
> > + *
> > + * The SoCs documentations seems to confirm this, as the DPTSR register
> > + * is not documented if only the first source exists on that SoC.
> > + */
> > + if (rgrp->channels_mask & BIT(1)) {
> > + mutex_lock(&rgrp->lock);
> > + rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
> > + rgrp->dptsr_planes);
> > + mutex_unlock(&rgrp->lock);
> > + }
> > }
> >
> > /*
> >
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list