[PATCH v3] drm/msm/dpu: filter out too wide modes if no 3dmux is present
Xiangxu Yin
quic_xiangxuy at quicinc.com
Tue Dec 10 03:47:49 UTC 2024
On 12/10/2024 5:18 AM, Abhinav Kumar wrote:
> On chipsets such as QCS615, there is no 3dmux present. In such
> a case, a layer exceeding the max_mixer_width cannot be split,
> hence cannot be supported.
>
> Filter out the modes which exceed the max_mixer_width when there
> is no 3dmux present. Also, add a check in the dpu_crtc_atomic_check()
> to return failure for such modes.
>
> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> ---
> Note: this was only compile tested, so its pending validation on QCS615
> ---
> Changes in v3:
> - Move && to previous line
> - Link to v2: https://lore.kernel.org/r/20241209-no_3dmux-v2-1-fcad057eb92e@quicinc.com
>
> Changes in v2:
> - replace MODE_BAD with MODE_BAD_HVALUE to indicate the failure better
> - Link to v1: https://lore.kernel.org/r/20241206-no_3dmux-v1-1-72ad2677a323@quicinc.com
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
Tested-by: Xiangxu Yin <quic_xiangxuy at quicinc.com> # QCS615
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index 9f6ffd344693ecfb633095772a31ada5613345dc..ad3462476a143ec01a3b8817a2c85b0f50435a9e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -732,6 +732,13 @@ static int _dpu_crtc_check_and_setup_lm_bounds(struct drm_crtc *crtc,
> struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
> int i;
>
> + /* if we cannot merge 2 LMs (no 3d mux) better to fail earlier
> + * before even checking the width after the split
> + */
> + if (!dpu_kms->catalog->caps->has_3d_merge &&
> + adj_mode->hdisplay > dpu_kms->catalog->caps->max_mixer_width)
> + return -E2BIG;
> +
> for (i = 0; i < cstate->num_mixers; i++) {
> struct drm_rect *r = &cstate->lm_bounds[i];
> r->x1 = crtc_split_width * i;
> @@ -1251,6 +1258,12 @@ static enum drm_mode_status dpu_crtc_mode_valid(struct drm_crtc *crtc,
> {
> struct dpu_kms *dpu_kms = _dpu_crtc_get_kms(crtc);
>
> + /* if there is no 3d_mux block we cannot merge LMs so we cannot
> + * split the large layer into 2 LMs, filter out such modes
> + */
> + if (!dpu_kms->catalog->caps->has_3d_merge &&
> + mode->hdisplay > dpu_kms->catalog->caps->max_mixer_width)
> + return MODE_BAD_HVALUE;
> /*
> * max crtc width is equal to the max mixer width * 2 and max height is 4K
> */
>
> ---
> base-commit: af2ea8ab7a546b430726183458da0a173d331272
> change-id: 20241206-no_3dmux-521a55ea0669
>
> Best regards,
More information about the dri-devel
mailing list