[PATCH v3 04/10] dt-bindings: display: renesas,du: Add r8a779h0

Tomi Valkeinen tomi.valkeinen at ideasonboard.com
Fri Dec 13 14:04:28 UTC 2024


Hi,

On 11/12/2024 17:45, Rob Herring wrote:
> On Fri, Dec 06, 2024 at 11:32:37AM +0200, Tomi Valkeinen wrote:
>> From: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
>>
>> Extend the Renesas DU display bindings to support the r8a779h0 V4M.
>>
>> Note that we remove the requirement for two ports from the global part
>> of the bindings, as each conditional part defines the number of required
>> ports already. This came up with r8a779h0 as it's the first one that has
>> only one port.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
>> Tested-by: Geert Uytterhoeven <geert+renesas at glider.be>
>> ---
>>   .../devicetree/bindings/display/renesas,du.yaml    | 52 ++++++++++++++++++++--
>>   1 file changed, 48 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
>> index c5b9e6812bce..7dec47aea052 100644
>> --- a/Documentation/devicetree/bindings/display/renesas,du.yaml
>> +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
>> @@ -41,6 +41,7 @@ properties:
>>         - renesas,du-r8a77995 # for R-Car D3 compatible DU
>>         - renesas,du-r8a779a0 # for R-Car V3U compatible DU
>>         - renesas,du-r8a779g0 # for R-Car V4H compatible DU
>> +      - renesas,du-r8a779h0 # for R-Car V4M compatible DU
>>   
>>     reg:
>>       maxItems: 1
>> @@ -69,10 +70,6 @@ properties:
>>           $ref: /schemas/graph.yaml#/properties/port
>>           unevaluatedProperties: false
>>   
>> -    required:
>> -      - port at 0
>> -      - port at 1
>> -
>>       unevaluatedProperties: false
>>   
>>     renesas,cmms:
>> @@ -807,6 +804,53 @@ allOf:
>>           - reset-names
>>           - renesas,vsps
>>   
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - renesas,du-r8a779h0
>> +    then:
>> +      properties:
>> +        clocks:
>> +          items:
>> +            - description: Functional clock
>> +
>> +        clock-names:
>> +          items:
>> +            - const: du.0
>> +
>> +        interrupts:
>> +          maxItems: 1
>> +
>> +        resets:
>> +          maxItems: 1
>> +
>> +        reset-names:
>> +          items:
>> +            - const: du.0
>> +
>> +        ports:
>> +          properties:
>> +            port at 0:
>> +              description: DSI 0
>> +            port at 1: false
>> +            port at 2: false
>> +            port at 3: false
>> +
>> +          required:
>> +            - port at 0
>> +
>> +        renesas,vsps:
>> +          minItems: 1
> 
> maxItems? The min is already 1.
> 
> Note maxItems is missing in all the other cases too. Since the top-level
> definition has no constraints, all the constraints under if/then schemas
> need both minItems and maxItems. (Unless there's no max).

Thanks. I have sent a v4, with a new patch that adds the maxItems to all 
SoCs, and also fixed this patch similarly.

  Tomi



More information about the dri-devel mailing list