[PATCH 2/2] drm/i2c: move TDA drivers under drivers/gpu/drm/bridge

[Dmitry Baryshkov]

On Sun, Dec 15, 2024 at 02:38:05PM +0200, Laurent Pinchart wrote:
> Hi Dmitry,
> 
> Thank you for the patch.
> 
> On Sun, Dec 15, 2024 at 01:09:08PM +0200, Dmitry Baryshkov wrote:
> > TDA998x is the HDMI bridge driver, incorporating drm_connector and
> > optional drm_encoder (created via the component bind API by the TICLDC
> > and HDLCD drivers). Thus it should be residing together with the other
> > DRM bridge drivers under drivers/gpu/drm/bridge/.
> > 
> > TDA9950 is an I2C-CEC translator, being present on-die on the TDA9989
> > and TDA19989 chips, so it is being instantiated by the TDA998x driver.
> > Move it together with the TDA998x under bridge drivers subdir.
> > 
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > ---
> >  MAINTAINERS                                       |  2 +-
> >  drivers/gpu/drm/arm/Kconfig                       |  1 +
> >  drivers/gpu/drm/bridge/Kconfig                    |  2 ++
> >  drivers/gpu/drm/bridge/Makefile                   |  1 +
> >  drivers/gpu/drm/bridge/tda/Kconfig                | 13 +++++++++++++
> >  drivers/gpu/drm/bridge/tda/Makefile               |  4 ++++
> >  drivers/gpu/drm/{i2c => bridge/tda}/tda9950.c     |  0
> >  drivers/gpu/drm/{i2c => bridge/tda}/tda998x_drv.c |  0
> 
> I probably wouldn't have created a tda/ subdirectory in bridge/, but I
> don't mind much either way.

I created it mostly because tda9950 isn't a bridge. It's a CEC driver
that works in pair with the tda998x driver.

> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

-- 
With best wishes
Dmitry