[PATCH v2 1/3] dt-bindings: display: bridge: sn65dsi83: Add interrupt

[Herve Codina]

Both the TI SN65DSI83 and SN65DSI84 bridges have an IRQ pin to signal
errors using interrupt.

This interrupt is not documented in the binding.

Add the missing interrupts property.

Signed-off-by: Herve Codina <herve.codina at bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley at microchip.com>
---
 .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml       | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 48a97bb3e2e0..4505d2d83e0d 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -35,6 +35,9 @@ properties:
   vcc-supply:
     description: A 1.8V power supply (see regulator/regulator.yaml).
 
+  interrupts:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-- 
2.47.0