[PATCH v4 1/3] dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712

[Krzysztof Kozlowski]

On Wed, Dec 18, 2024 at 02:48:32PM +0000, Dave Stevenson wrote:
> Commit 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
> added the compatible strings for BCM2712, but missed out that the
> number of interrupts changed.
> 
> Update the schema to include the interrupt requirements.
> 
> Fixes: 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
> Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
> ---
>  .../bindings/display/brcm,bcm2711-hdmi.yaml        | 81 ++++++++++++++++++----
>  1 file changed, 67 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> index 6d11f5955b51..83c058728ef1 100644
> --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> @@ -56,22 +56,12 @@ properties:
>        - const: cec
>  
>    interrupts:
> -    items:
> -      - description: CEC TX interrupt
> -      - description: CEC RX interrupt
> -      - description: CEC stuck at low interrupt
> -      - description: Wake-up interrupt
> -      - description: Hotplug connected interrupt
> -      - description: Hotplug removed interrupt
> +    minItems: 5
> +    maxItems: 6
>  
>    interrupt-names:
> -    items:
> -      - const: cec-tx
> -      - const: cec-rx
> -      - const: cec-low
> -      - const: wakeup
> -      - const: hpd-connected
> -      - const: hpd-removed
> +    minItems: 5
> +    maxItems: 6
>  
>    ddc:
>      $ref: /schemas/types.yaml#/definitions/phandle
> @@ -112,6 +102,66 @@ required:
>  
>  additionalProperties: false
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - brcm,bcm2711-hdmi0
> +              - brcm,bcm2711-hdmi1
> +    then:
> +      properties:
> +        interrupts:
> +          items:
> +            - description: CEC TX interrupt
> +            - description: CEC RX interrupt
> +            - description: CEC stuck at low interrupt
> +            - description: Wake-up interrupt
> +            - description: Hotplug connected interrupt
> +            - description: Hotplug removed interrupt
> +        interrupt-names:
> +          items:
> +            - const: cec-tx
> +            - const: cec-rx
> +            - const: cec-low
> +            - const: wakeup
> +            - const: hpd-connected
> +            - const: hpd-removed
> +
> +

Only one blank line

> +      required:
> +        - interrupts
> +        - interrupt-names

But anyway this is unusual. Why this was added? Nothing in commit msg
explains this.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - brcm,bcm2712-hdmi0
> +              - brcm,bcm2712-hdmi1
> +    then:
> +      properties:
> +        interrupts:
> +          items:
> +            - description: CEC TX interrupt
> +            - description: CEC RX interrupt
> +            - description: CEC stuck at low interrupt
> +            - description: Hotplug connected interrupt
> +            - description: Hotplug removed interrupt
> +        interrupts-names:
> +          items:
> +            - const: cec-tx
> +            - const: cec-rx
> +            - const: cec-low
> +            - const: hpd-connected
> +            - const: hpd-removed
> +
> +      required:
> +        - interrupts
> +        - interrupt-names

Same question.

> +
>  examples:
>    - |
>      hdmi0: hdmi at 7ef00700 {
> @@ -136,6 +186,9 @@ examples:
>                      "hd";
>          clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
>          clock-names = "hdmi", "bvb", "audio", "cec";
> +        interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
> +        interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup",
> +                "hpd-connected", "hpd-removed";

Fix alignment with opening " from earlier line (see DTS coding style).

Best regards,
Krzysztof