[PATCH v2 16/16] drm/i915/dp: compute config for 128b/132b SST w/o DSC
Jani Nikula
jani.nikula at intel.com
Thu Dec 19 21:34:05 UTC 2024
Enable basic 128b/132b SST functionality without compression. Reuse
intel_dp_mtp_tu_compute_config() to figure out the TU after we've
determined we need to use an UHBR rate.
It's slightly complicated as the M/N computation is done in different
places in MST and SST paths, so we need to avoid trashing the values
later for UHBR.
If uncompressed UHBR fails, we drop to compressed non-UHBR, which is
quite likely to fail as well. We still lack 128b/132b SST+DSC.
We need mst_master_transcoder also for 128b/132b SST. Use cpu_transcoder
directly. Enhanced framing is "don't care" for 128b/132b link.
v2: mst_master_transcoder, enhanced framing (Imre)
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 34 +++++++++++++++++--------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index fba3af338280..d14a42f02ba8 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2525,8 +2525,8 @@ intel_dp_compute_config_limits(struct intel_dp *intel_dp,
limits->min_rate = intel_dp_min_link_rate(intel_dp);
limits->max_rate = intel_dp_max_link_rate(intel_dp);
- /* FIXME 128b/132b SST support missing */
- if (!is_mst)
+ /* FIXME 128b/132b SST+DSC support missing */
+ if (!is_mst && dsc)
limits->max_rate = min(limits->max_rate, 810000);
limits->min_rate = min(limits->min_rate, limits->max_rate);
@@ -2640,6 +2640,13 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
*/
ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config,
conn_state, &limits);
+ if (!ret && intel_dp_is_uhbr(pipe_config))
+ ret = intel_dp_mtp_tu_compute_config(intel_dp,
+ pipe_config,
+ pipe_config->pipe_bpp,
+ pipe_config->pipe_bpp,
+ conn_state,
+ 0, false);
if (ret)
dsc_needed = true;
}
@@ -3148,8 +3155,13 @@ intel_dp_compute_config(struct intel_encoder *encoder,
pipe_config->limited_color_range =
intel_dp_limited_color_range(pipe_config, conn_state);
- pipe_config->enhanced_framing =
- drm_dp_enhanced_frame_cap(intel_dp->dpcd);
+ if (intel_dp_is_uhbr(pipe_config)) {
+ /* 128b/132b SST also needs this */
+ pipe_config->mst_master_transcoder = pipe_config->cpu_transcoder;
+ } else {
+ pipe_config->enhanced_framing =
+ drm_dp_enhanced_frame_cap(intel_dp->dpcd);
+ }
if (pipe_config->dsc.compression_enable)
link_bpp_x16 = pipe_config->dsc.compressed_bpp_x16;
@@ -3180,12 +3192,14 @@ intel_dp_compute_config(struct intel_encoder *encoder,
intel_dp_audio_compute_config(encoder, pipe_config, conn_state);
- intel_link_compute_m_n(link_bpp_x16,
- pipe_config->lane_count,
- adjusted_mode->crtc_clock,
- pipe_config->port_clock,
- intel_dp_bw_fec_overhead(pipe_config->fec_enable),
- &pipe_config->dp_m_n);
+ if (!intel_dp_is_uhbr(pipe_config)) {
+ intel_link_compute_m_n(link_bpp_x16,
+ pipe_config->lane_count,
+ adjusted_mode->crtc_clock,
+ pipe_config->port_clock,
+ intel_dp_bw_fec_overhead(pipe_config->fec_enable),
+ &pipe_config->dp_m_n);
+ }
/* FIXME: abstract this better */
if (pipe_config->splitter.enable)
--
2.39.5
More information about the dri-devel
mailing list