[PATCH v3 14/15] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board

[Dmitry Baryshkov]

On Fri, 20 Dec 2024 at 04:38, Damon Ding <damon.ding at rock-chips.com> wrote:
>
> Hi Dmitry,
>
> On 2024/12/20 8:20, Dmitry Baryshkov wrote:
> > On Thu, Dec 19, 2024 at 04:06:03PM +0800, Damon Ding wrote:
> >> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
> >> - Add edp-panel node
> >> - Set pinctrl of pwm12 for backlight
> >> - Enable edp0/hdptxphy0/vp2
> >>
> >> Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
> >>
> >> ---
> >>
> >> Changes in v2:
> >> - Remove brightness-levels and default-brightness-level properties in
> >>    backlight node.
> >> - Add the detail DT changes to commit message.
> >>
> >> Changes in v3:
> >> - Use aux-bus instead of platform bus for edp-panel.
> >> ---
> >>   .../boot/dts/rockchip/rk3588s-evb1-v10.dts    | 52 +++++++++++++++++++
> >>   1 file changed, 52 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> >> index bc4077575beb..9547ab18e596 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> >> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> >> @@ -9,6 +9,7 @@
> >>   #include <dt-bindings/gpio/gpio.h>
> >>   #include <dt-bindings/input/input.h>
> >>   #include <dt-bindings/pinctrl/rockchip.h>
> >> +#include <dt-bindings/soc/rockchip,vop2.h>
> >>   #include <dt-bindings/usb/pd.h>
> >>   #include "rk3588s.dtsi"
> >>
> >> @@ -238,6 +239,41 @@ &combphy2_psu {
> >>      status = "okay";
> >>   };
> >>
> >> +&edp0 {
> >> +    force-hpd;
> >> +    status = "okay";
> >> +
> >> +    aux-bus {
> >> +            panel {
> >> +                    compatible = "lg,lp079qx1-sp0v";
> >
> > Why do you need the particular compat string here? Can you use the
> > generic "edp-panel" instead? What if the user swaps the panel?
> >
>
> The eDP panels used in conjunction with the RK3588S EVB1 have broken
> identification, which is one of the valid reasons for using a particular
> compat string. So the generic_edp_panel_probe() can not return success
> when using the "edp-panel".

Broken how? I don't see such info in the commit message.

>
> >> +                    backlight = <&backlight>;
> >> +                    power-supply = <&vcc3v3_lcd_edp>;
> >> +
> >> +                    port {
> >> +                            panel_in_edp: endpoint {
> >> +                                    remote-endpoint = <&edp_out_panel>;
> >> +                            };
> >> +                    };
> >> +            };
> >> +    };
> >> +};
> >> +
> >> +&edp0_in {
> >> +    edp0_in_vp2: endpoint {
> >> +            remote-endpoint = <&vp2_out_edp0>;
> >> +    };
> >> +};
> >> +
> >> +&edp0_out {
> >> +    edp_out_panel: endpoint {
> >> +            remote-endpoint = <&panel_in_edp>;
> >> +    };
> >> +};
> >> +
> >> +&hdptxphy0 {
> >> +    status = "okay";
> >> +};
> >> +
> >>   &i2c3 {
> >>      status = "okay";
> >>
> >> @@ -399,6 +435,7 @@ usbc0_int: usbc0-int {
> >>   };
> >>
> >>   &pwm12 {
> >> +    pinctrl-0 = <&pwm12m1_pins>;
> >>      status = "okay";
> >>   };
> >>
> >> @@ -1168,3 +1205,18 @@ usbdp_phy0_dp_altmode_mux: endpoint at 1 {
> >>              };
> >>      };
> >>   };
> >> +
> >> +&vop_mmu {
> >> +    status = "okay";
> >> +};
> >> +
> >> +&vop {
> >> +    status = "okay";
> >> +};
> >> +
> >> +&vp2 {
> >> +    vp2_out_edp0: endpoint at ROCKCHIP_VOP2_EP_EDP0 {
> >> +            reg = <ROCKCHIP_VOP2_EP_EDP0>;
> >> +            remote-endpoint = <&edp0_in_vp2>;
> >> +    };
> >> +};
> >> --
> >> 2.34.1
> >>
> >
> Best regards,
> Damon



-- 
With best wishes
Dmitry