[PATCH 03/22] dt-bindings: clock: sun8i de2 clock: Add PLL com clock

[Rob Herring (Arm)]

On Fri, 27 Dec 2024 16:37:50 +0530, Parthiban Nallathambi wrote:
> Some platforms like A100/A133 also uses pll-com clock as additional
> clock source for the display clock. This is not documents both in
> user manual and DE 2.0 specification. These changes are mainly from
> vendor BSP.
> 
> Signed-off-by: Parthiban Nallathambi <parthiban at linumiz.com>
> ---
>  .../devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml         | 2 ++
>  1 file changed, 2 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.example.dtb: clock at 1000000: clocks: [[4294967295, 48], [4294967295, 101]] is too short
	from schema $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.example.dtb: clock at 1000000: clock-names: ['bus', 'mod'] is too short
	from schema $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.example.dtb: clock at 0: clocks: [[4294967295, 52], [4294967295, 99]] is too short
	from schema $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.example.dtb: clock at 0: clock-names: ['bus', 'mod'] is too short
	from schema $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241227-a133-display-support-v1-3-13b52f71fb14@linumiz.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.