[PATCH v2 7/7] drm/vkms: Create KUnit tests for YUV conversions

Louis Chauvet louis.chauvet at bootlin.com
Thu Feb 1 17:40:39 UTC 2024


[...]

> +	{
> +		.encoding = DRM_COLOR_YCBCR_BT709,
> +		.range = DRM_COLOR_YCBCR_FULL_RANGE,
> +		.n_colors = 4,
> +		.colors = {
> +			{"white", {0xff, 0x80, 0x80}, {0x0000, 0xffff, 0xffff, 0xffff}},
> +			{"gray",  {0x80, 0x80, 0x80}, {0x0000, 0x8000, 0x8000, 0x8000}},
> +			{"black", {0x00, 0x80, 0x80}, {0x0000, 0x0000, 0x0000, 0x0000}},
> +			{"red",   {0x35, 0x63, 0xff}, {0x0000, 0xffff, 0x0000, 0x0000}},
> +			{"green", {0xb6, 0x1e, 0x0c}, {0x0000, 0x0000, 0xffff, 0x0000}},
> +			{"blue",  {0x12, 0xff, 0x74}, {0x0000, 0x0000, 0x0000, 0xffff}},
> +		},
> +	},
> +	{
> +		.encoding = DRM_COLOR_YCBCR_BT709,
> +		.range = DRM_COLOR_YCBCR_LIMITED_RANGE,
> +		.n_colors = 4,

I think there is a mistake in n_colors here, if I understand correctly it 
must be the size of .colors, so here it should probably be 6?

> +		.colors = {
> +			{"white", {0xeb, 0x80, 0x80}, {0x0000, 0xffff, 0xffff, 0xffff}},
> +			{"gray",  {0x7e, 0x80, 0x80}, {0x0000, 0x8000, 0x8000, 0x8000}},
> +			{"black", {0x10, 0x80, 0x80}, {0x0000, 0x0000, 0x0000, 0x0000}},
> +			{"red",   {0x3f, 0x66, 0xf0}, {0x0000, 0xffff, 0x0000, 0x0000}},
> +			{"green", {0xad, 0x2a, 0x1a}, {0x0000, 0x0000, 0xffff, 0x0000}},
> +			{"blue",  {0x20, 0xf0, 0x76}, {0x0000, 0x0000, 0x0000, 0xffff}},
> +		},
> +	},
> +	{
> +		.encoding = DRM_COLOR_YCBCR_BT2020,
> +		.range = DRM_COLOR_YCBCR_FULL_RANGE,
> +		.n_colors = 4,

Same here.

> +		.colors = {
> +			{"white", {0xff, 0x80, 0x80}, {0x0000, 0xffff, 0xffff, 0xffff}},
> +			{"gray",  {0x80, 0x80, 0x80}, {0x0000, 0x8000, 0x8000, 0x8000}},
> +			{"black", {0x00, 0x80, 0x80}, {0x0000, 0x0000, 0x0000, 0x0000}},
> +			{"red",   {0x43, 0x5c, 0xff}, {0x0000, 0xffff, 0x0000, 0x0000}},
> +			{"green", {0xad, 0x24, 0x0b}, {0x0000, 0x0000, 0xffff, 0x0000}},
> +			{"blue",  {0x0f, 0xff, 0x76}, {0x0000, 0x0000, 0x0000, 0xffff}},
> +		},
> +	},
> +	{
> +		.encoding = DRM_COLOR_YCBCR_BT2020,
> +		.range = DRM_COLOR_YCBCR_LIMITED_RANGE,
> +		.n_colors = 4,

Same here.

> +		.colors = {
> +			{"white", {0xeb, 0x80, 0x80}, {0x0000, 0xffff, 0xffff, 0xffff}},
> +			{"gray",  {0x7e, 0x80, 0x80}, {0x0000, 0x8000, 0x8000, 0x8000}},
> +			{"black", {0x10, 0x80, 0x80}, {0x0000, 0x0000, 0x0000, 0x0000}},
> +			{"red",   {0x4a, 0x61, 0xf0}, {0x0000, 0xffff, 0x0000, 0x0000}},
> +			{"green", {0xa4, 0x2f, 0x19}, {0x0000, 0x0000, 0xffff, 0x0000}},
> +			{"blue",  {0x1d, 0xf0, 0x77}, {0x0000, 0x0000, 0x0000, 0xffff}},
> +		},
> +	},
> +};

[...]

-- 
Louis Chauvet, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com


More information about the dri-devel mailing list