[PATCH 2/4] media: i2c: replace of_graph_get_next_endpoint()

[Krzysztof Hałasa]

Laurent,

Laurent Pinchart <laurent.pinchart at ideasonboard.com> writes:

>> +++ b/drivers/media/i2c/adv7604.c
>> @@ -3205,7 +3205,7 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
>>       np = state->i2c_clients[ADV76XX_PAGE_IO]->dev.of_node;
>>
>>       /* Parse the endpoint. */
>> -     endpoint = of_graph_get_next_endpoint(np, NULL);
>> +     endpoint = of_graph_get_endpoint_by_regs(np, 0, -1);
>
> I think this should be port 1 for the adv7611 and port2 for the adv7612.
> The adv7610 may need to use port 1 too, but the bindings likely need to
> be updated.

To be honest I have no idea about ADV7611 and 7612.
The 7610 I have on Tinyrex "mobo" seems to be single port.

ADV7611 seems to be mostly a 7610 in a different package (LQFP 64
instead of some BGA 76). The driver simply treats ADV7610 as a 7611.

ADV7612 is apparently dual port (only one port can be used at a time)
though:

[ADV7612] = {
        .type = ADV7612,
        .has_afe = false,
        .max_port = ADV76XX_PAD_HDMI_PORT_A,    /* B not supported */
        .num_dv_ports = 1,                      /* normally 2 */


All related in-tree DTS entries (as of v6.8.0-rc1) seem to be ADV7612.

To me it seems all known devices use the first port only.
-- 
Krzysztof "Chris" Hałasa

Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa