[PATCH v3 1/3] backlight: mp3309c: Make use of device properties
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Thu Feb 8 18:24:46 UTC 2024
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Tested-by: Flavio Suligoi <f.suligoi at asem.it>
Reviewed-by: Daniel Thompson <daniel.thompson at linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
drivers/video/backlight/mp3309c.c | 44 +++++++++++++------------------
1 file changed, 18 insertions(+), 26 deletions(-)
diff --git a/drivers/video/backlight/mp3309c.c b/drivers/video/backlight/mp3309c.c
index b0d9aef6942b..397f35dafc5e 100644
--- a/drivers/video/backlight/mp3309c.c
+++ b/drivers/video/backlight/mp3309c.c
@@ -15,6 +15,8 @@
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
@@ -199,18 +201,15 @@ static const struct backlight_ops mp3309c_bl_ops = {
.update_status = mp3309c_bl_update_status,
};
-static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
- struct mp3309c_platform_data *pdata)
+static int mp3309c_parse_fwnode(struct mp3309c_chip *chip,
+ struct mp3309c_platform_data *pdata)
{
- struct device_node *node = chip->dev->of_node;
- struct property *prop_pwms;
- struct property *prop_levels = NULL;
- int length = 0;
int ret, i;
unsigned int num_levels, tmp_value;
+ struct device *dev = chip->dev;
- if (!node) {
- dev_err(chip->dev, "failed to get DT node\n");
+ if (!dev_fwnode(dev)) {
+ dev_err(dev, "failed to get firmware node\n");
return -ENODEV;
}
@@ -224,8 +223,7 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
* found in the backlight node, the mode switches to PWM mode.
*/
pdata->dimming_mode = DIMMING_ANALOG_I2C;
- prop_pwms = of_find_property(node, "pwms", &length);
- if (prop_pwms) {
+ if (device_property_present(dev, "pwms")) {
chip->pwmd = devm_pwm_get(chip->dev, NULL);
if (IS_ERR(chip->pwmd))
return dev_err_probe(chip->dev, PTR_ERR(chip->pwmd),
@@ -257,11 +255,9 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
/*
* PWM control mode: check for brightness level in DT
*/
- prop_levels = of_find_property(node, "brightness-levels",
- &length);
- if (prop_levels) {
+ if (device_property_present(dev, "brightness-levels")) {
/* Read brightness levels from DT */
- num_levels = length / sizeof(u32);
+ num_levels = device_property_count_u32(dev, "brightness-levels");
if (num_levels < 2)
return -EINVAL;
} else {
@@ -275,10 +271,9 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
sizeof(*pdata->levels), GFP_KERNEL);
if (!pdata->levels)
return -ENOMEM;
- if (prop_levels) {
- ret = of_property_read_u32_array(node, "brightness-levels",
- pdata->levels,
- num_levels);
+ if (device_property_present(dev, "brightness-levels")) {
+ ret = device_property_read_u32_array(dev, "brightness-levels",
+ pdata->levels, num_levels);
if (ret < 0)
return ret;
} else {
@@ -288,8 +283,7 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
pdata->max_brightness = num_levels - 1;
- ret = of_property_read_u32(node, "default-brightness",
- &pdata->default_brightness);
+ ret = device_property_read_u32(dev, "default-brightness", &pdata->default_brightness);
if (ret)
pdata->default_brightness = pdata->max_brightness;
if (pdata->default_brightness > pdata->max_brightness) {
@@ -310,8 +304,8 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
* If missing, the default value for OVP is 35.5V
*/
pdata->over_voltage_protection = REG_I2C_1_OVP1;
- if (!of_property_read_u32(node, "mps,overvoltage-protection-microvolt",
- &tmp_value)) {
+ ret = device_property_read_u32(dev, "mps,overvoltage-protection-microvolt", &tmp_value);
+ if (!ret) {
switch (tmp_value) {
case 13500000:
pdata->over_voltage_protection = 0x00;
@@ -328,9 +322,7 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
}
/* Synchronous (default) and non-synchronous mode */
- pdata->sync_mode = true;
- if (of_property_read_bool(node, "mps,no-sync-mode"))
- pdata->sync_mode = false;
+ pdata->sync_mode = !device_property_read_bool(dev, "mps,no-sync-mode");
return 0;
}
@@ -366,7 +358,7 @@ static int mp3309c_probe(struct i2c_client *client)
if (!pdata)
return -ENOMEM;
- ret = pm3309c_parse_dt_node(chip, pdata);
+ ret = mp3309c_parse_fwnode(chip, pdata);
if (ret)
return ret;
}
--
2.43.0.rc1.1.gbec44491f096
More information about the dri-devel
mailing list