[PATCH i-g-t v3] benchmarks: Add VKMS benchmark
Arthur Grillo
arthurgrillo at riseup.net
Tue Feb 13 19:59:51 UTC 2024
On 13/02/24 15:06, Kamil Konieczny wrote:
> Hi Arthur,
> On 2024-02-09 at 16:39:09 -0300, Arthur Grillo wrote:
>
> I will merge this with different description:
>
> [PATCH i-g-t v3] benchmarks: Add KMS frambuffer stress benchmark
>
> Is this ok?
Its ok
Best Regards,
~Arthur Grillo
>
> Regards,
> Kamil
>
>> Create a benchmark for the VKMS driver. Use a KMS layout with deliberate
>> odd sizes to try to avoid alignment accidents and run it for FRAME_COUNT
>> frames flipping framebuffers in each plane.
>>
>> This benchmark was suggested by Pekka Paalanen to better analyse
>> possible performance regression on the Virtual Kernel Modesetting(VKMS)
>> driver.
>>
>> With this benchmark I was able to determine two performance regression:
>>
>> - 322d716a3e8a ("drm/vkms: isolate pixel conversion functionality")
>> - cc4fd2934d41 ("drm/vkms: Isolate writeback pixel conversion functions")
>>
>> Link: https://lore.kernel.org/all/20240202214527.1d97c881@ferris.localdomain/
>> Suggested-by: Pekka Paalanen <pekka.paalanen at haloniitty.fi>
>> Acked-by: Pekka Paalanen <pekka.paalanen at collabora.com>
>> Acked-by: Maíra Canal <mcanal at igalia.com>
>> Acked-by: Kamil Konieczny <kamil.konieczny at linux.intel.com>
>> Signed-off-by: Arthur Grillo <arthurgrillo at riseup.net>
>> ---
>> Changes in v3:
>> - Change primary plane width to not extend outside the CRTC size
>> - Explicitly set a big CRTC size (Peeka Paalanen)
>> - Report time spent in the loop (Peeka Paalanen)
>> - Put file name in alphabetical order on meson script (Kamil Konieczny)
>> - Link to v2: https://lore.kernel.org/r/20240208-bench-v2-1-1eccee1055ad@riseup.net
>>
>> Changes in v2:
>> - Zero initialize data
>> - Don't wrap igt_create_* functions (Juha-Pekka Heikkila)
>> - Add a `break;` when a pipe is found (Pekka Paalanen)
>> - Rename file to kms_fb_stress.c (Kamil Konieczny)
>> - Replace 2 by NUM_FBS (Juha-Pekka Heikkila)
>> - Replace license text by SPDX License (Kamil Konieczny)
>> - Move explanations to commit description (Kamil Konieczny)
>> - Require output after find_wb_output() (Pekka Paalanen & Juha-Pekka
>> Heikkila)
>> - Remove unnecessary commit (Pekka Paalanen)
>> - Link to v1: https://lore.kernel.org/r/20240207-bench-v1-1-7135ad426860@riseup.net
>> ---
>> benchmarks/kms_fb_stress.c | 208 +++++++++++++++++++++++++++++++++++++++++++++
>> benchmarks/meson.build | 1 +
>> 2 files changed, 209 insertions(+)
>>
>> diff --git a/benchmarks/kms_fb_stress.c b/benchmarks/kms_fb_stress.c
>> new file mode 100644
>> index 000000000000..9a0e98bed8ad
>> --- /dev/null
>> +++ b/benchmarks/kms_fb_stress.c
>> @@ -0,0 +1,208 @@
>> +// SPDX-License-Identifier: MIT
>> +/*
>> + * Copyright © 2024 Arthur Grillo
>> + */
>> +
>> +#include "igt.h"
>> +
>> +#define FRAME_COUNT 100
>> +#define NUM_FBS 2
>> +
>> +struct rect_t {
>> + int x, y;
>> + int width, height;
>> +};
>> +
>> +struct plane_t {
>> + igt_plane_t *base;
>> + struct rect_t rect;
>> + uint32_t format;
>> + struct igt_fb fbs[NUM_FBS];
>> +};
>> +
>> +struct kms_t {
>> + struct rect_t crtc;
>> + struct plane_t primary;
>> + struct plane_t overlay_a;
>> + struct plane_t overlay_b;
>> + struct plane_t writeback;
>> +};
>> +
>> +struct data_t {
>> + int fd;
>> + igt_display_t display;
>> + igt_output_t *wb_output;
>> + drmModeModeInfo *mode;
>> + struct kms_t kms;
>> +};
>> +
>> +static void plane_setup(struct plane_t *plane, int index)
>> +{
>> + igt_plane_set_size(plane->base, plane->rect.width, plane->rect.height);
>> + igt_plane_set_position(plane->base, plane->rect.x, plane->rect.y);
>> + igt_plane_set_fb(plane->base, &plane->fbs[index]);
>> +}
>> +
>> +static void gen_fbs(struct data_t *data)
>> +{
>> + struct kms_t *kms = &data->kms;
>> + drmModeModeInfo *mode = igt_output_get_mode(data->wb_output);
>> +
>> + for (int i = 0; i < NUM_FBS; i++) {
>> + igt_create_color_fb(data->fd, kms->primary.rect.width, kms->primary.rect.height,
>> + kms->primary.format, DRM_FORMAT_MOD_LINEAR,
>> + !i, i, i,
>> + &kms->primary.fbs[i]);
>> +
>> + igt_create_color_fb(data->fd, kms->overlay_a.rect.width, kms->overlay_a.rect.height,
>> + kms->overlay_a.format, DRM_FORMAT_MOD_LINEAR,
>> + i, !i, i,
>> + &kms->overlay_a.fbs[i]);
>> +
>> + igt_create_color_fb(data->fd, kms->overlay_b.rect.width, kms->overlay_b.rect.height,
>> + kms->overlay_b.format, DRM_FORMAT_MOD_LINEAR,
>> + i, i, !i,
>> + &kms->overlay_b.fbs[i]);
>> +
>> + kms->writeback.rect.width = mode->hdisplay;
>> + kms->writeback.rect.height = mode->vdisplay;
>> + igt_create_fb(data->fd, kms->writeback.rect.width, kms->writeback.rect.height,
>> + kms->writeback.format, DRM_FORMAT_MOD_LINEAR,
>> + &kms->writeback.fbs[i]);
>> + }
>> +}
>> +
>> +static igt_output_t *find_wb_output(struct data_t *data)
>> +{
>> + for (int i = 0; i < data->display.n_outputs; i++) {
>> + igt_output_t *output = &data->display.outputs[i];
>> +
>> + if (output->config.connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
>> + continue;
>> +
>> + return output;
>> +
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +static void set_crtc_size(struct data_t *data)
>> +{
>> + drmModeModeInfo *mode;
>> + struct rect_t *crtc = &data->kms.crtc;
>> +
>> + for_each_connector_mode(data->wb_output) {
>> + mode = &data->wb_output->config.connector->modes[j__];
>> + if (mode->hdisplay == crtc->width && mode->vdisplay == crtc->height) {
>> + igt_output_override_mode(data->wb_output, mode);
>> + return;
>> + }
>> + }
>> +
>> +
>> + igt_assert_f(0, "CRTC size %dx%d not supported\n", crtc->width, crtc->height);
>> +}
>> +
>> +static struct kms_t default_kms = {
>> + .crtc = {
>> + .width = 4096, .height = 2160,
>> + },
>> + .primary = {
>> + .rect = {
>> + .x = 101, .y = 0,
>> + .width = 3639, .height = 2160,
>> + },
>> + .format = DRM_FORMAT_XRGB8888,
>> + },
>> + .overlay_a = {
>> + .rect = {
>> + .x = 201, .y = 199,
>> + .width = 3033, .height = 1777,
>> + },
>> + .format = DRM_FORMAT_XRGB16161616,
>> + },
>> + .overlay_b = {
>> + .rect = {
>> + .x = 1800, .y = 250,
>> + .width = 1507, .height = 1400,
>> + },
>> + .format = DRM_FORMAT_ARGB8888,
>> + },
>> + .writeback = {
>> + .rect = {
>> + .x = 0, .y = 0,
>> + // Size is to be determined at runtime
>> + },
>> + .format = DRM_FORMAT_XRGB8888,
>> + },
>> +};
>> +
>> +
>> +igt_simple_main
>> +{
>> + struct data_t data = {0};
>> + enum pipe pipe = PIPE_NONE;
>> + struct timespec then, now;
>> + double elapsed;
>> +
>> + data.kms = default_kms;
>> +
>> + data.fd = drm_open_driver_master(DRIVER_ANY);
>> +
>> + igt_display_require(&data.display, data.fd);
>> +
>> + kmstest_set_vt_graphics_mode();
>> +
>> + igt_display_require(&data.display, data.fd);
>> + igt_require(data.display.is_atomic);
>> +
>> + igt_display_require_output(&data.display);
>> +
>> + igt_display_reset(&data.display);
>> +
>> + data.wb_output = find_wb_output(&data);
>> + igt_require(data.wb_output);
>> +
>> + for_each_pipe(&data.display, pipe) {
>> + igt_debug("Selecting pipe %s to %s\n",
>> + kmstest_pipe_name(pipe),
>> + igt_output_name(data.wb_output));
>> + igt_output_set_pipe(data.wb_output, pipe);
>> + break;
>> + }
>> +
>> + set_crtc_size(&data);
>> +
>> + gen_fbs(&data);
>> +
>> + data.kms.primary.base = igt_output_get_plane_type(data.wb_output, DRM_PLANE_TYPE_PRIMARY);
>> + data.kms.overlay_a.base = igt_output_get_plane_type_index(data.wb_output,
>> + DRM_PLANE_TYPE_OVERLAY, 0);
>> + data.kms.overlay_b.base = igt_output_get_plane_type_index(data.wb_output,
>> + DRM_PLANE_TYPE_OVERLAY, 1);
>> +
>> + igt_assert_eq(igt_gettime(&then), 0);
>> +
>> + for (int i = 0; i < FRAME_COUNT; i++) {
>> + int fb_index = i % NUM_FBS;
>> +
>> + plane_setup(&data.kms.primary, fb_index);
>> +
>> + plane_setup(&data.kms.overlay_a, fb_index);
>> +
>> + plane_setup(&data.kms.overlay_b, fb_index);
>> +
>> + igt_output_set_writeback_fb(data.wb_output, &data.kms.writeback.fbs[fb_index]);
>> +
>> + igt_display_commit2(&data.display, COMMIT_ATOMIC);
>> + }
>> +
>> + igt_assert_eq(igt_gettime(&now), 0);
>> + elapsed = igt_time_elapsed(&then, &now);
>> +
>> + igt_info("Time spent in the loop with %d frames: %lfs.\n", FRAME_COUNT, elapsed);
>> +
>> + igt_display_fini(&data.display);
>> + drm_close_driver(data.fd);
>> +}
>> diff --git a/benchmarks/meson.build b/benchmarks/meson.build
>> index c451268bc44f..2c9a88fd3b00 100644
>> --- a/benchmarks/meson.build
>> +++ b/benchmarks/meson.build
>> @@ -17,6 +17,7 @@ benchmark_progs = [
>> 'intel_upload_blit_large_gtt',
>> 'intel_upload_blit_large_map',
>> 'intel_upload_blit_small',
>> + 'kms_fb_stress',
>> 'kms_vblank',
>> 'prime_lookup',
>> 'vgem_mmap',
>>
>> ---
>> base-commit: c58c5fb6aa1cb7d3627a15e364816a7a2add9edc
>> change-id: 20240207-bench-393789eaba47
>>
>> Best regards,
>> --
>> Arthur Grillo <arthurgrillo at riseup.net>
>>
More information about the dri-devel
mailing list