[PATCH 03/13] accel/habanalabs: modify print for skip loading linux FW to debug log

[Oded Gabbay]

From: Tomer Tayar <ttayar at habana.ai>

Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().

Signed-off-by: Tomer Tayar <ttayar at habana.ai>
Reviewed-by: Oded Gabbay <ogabbay at kernel.org>
Signed-off-by: Oded Gabbay <ogabbay at kernel.org>
---
 drivers/accel/habanalabs/common/firmware_if.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/accel/habanalabs/common/firmware_if.c b/drivers/accel/habanalabs/common/firmware_if.c
index e7dcf2fe6552..364d292c76fa 100644
--- a/drivers/accel/habanalabs/common/firmware_if.c
+++ b/drivers/accel/habanalabs/common/firmware_if.c
@@ -2820,7 +2820,7 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
 	hdev->asic_funcs->init_cpu_scrambler_dram(hdev);
 
 	if (!(hdev->fw_components & FW_TYPE_LINUX)) {
-		dev_info(hdev->dev, "Skip loading Linux F/W\n");
+		dev_dbg(hdev->dev, "Skip loading Linux F/W\n");
 		return 0;
 	}
 
-- 
2.34.1